Movado BOLD MOTION User manual

1
MOVADO BOLD MOTION USER GUIDE
GETTING STARTED
Watch overview
The Movado BOLD Motion has a button (1) on the left
side of the case that controls the watch functions. Press it
once to change the watch view. The views display in the
following order: analog, digital time, progress tracker
status, digital battery status, Bluetooth status. Analog
view is displayed by default, and the watch returns to
analog view after five seconds of inactivity. The crown
(2) is located on the right side of the case and is used
only to set the time.
NOTE: Do not operate the watch button or pull the crown
out while the watch is wet or underwater.
Setting the time
1. Gently pull the crown out to position 2; the seconds
hand stops moving.
2. Rotate the crown in either direction to move the hour
and minute hands to the desired time.
3. Push the crown back in to position 1; the seconds
hand restarts.
Charging the watch
The watch contains two batteries. One battery controls
the digital functions of the watch and can be recharged.
The other battery controls the analog functions of the
watch and is not rechargeable.
Before you set up the watch, charge it for at least four
hours. When the battery that controls digital functions
is fully charged, it should last five to seven days with
minimal use.
The first time you charge the watch, it might not vibrate
or illuminate. When you connect the watch to power
after the first time, the watch vibrates twice and the lights
between 3 and 9 o’clock fully illuminate and then fade,
to show the current digital battery status. When all seven
lights illuminate again and stop pulsing, the watch is fully
charged.
Each time you need to charge your watch, disconnect
the charger from power and thoroughly wipe the charger
and watch contact pins with a soft, lint-free cloth before
connecting the charger to power and then to the watch. If
needed, you may dampen the cloth with a small amount
of isopropyl rubbing alcohol. Never use soap or any
chemicals other than isopropyl rubbing alcohol to clean
the contact pins on the watch or charger.
Make sure that the isopropyl alcohol does not come into
contact with the watch strap.
Replacement of either battery—for the analog or the
digital functions—requires service from a Movado
Authorized Service Center. For locations, visit www.
mgiservice.com/movado. Never open the watch or
attempt to replace the batteries yourself; opening the
watch case will void your warranty. Movado Group
assumes responsibility only for service performed at its
Authorized Service Centers.

2
MOVADO BOLD MOTION USER GUIDE
Downloading and installing the phone app
The Movado BOLD app is designed for use with most
smartphones running Android 4.4 and higher or iOS 8
and higher. It does not support tablets.
The Movado BOLD app connects your watch to your
phone using Bluetooth®. Use the phone app to control
the information and notifications that are displayed on
your watch. If your watch is not connected to the phone
app, it will continue to tell the time, but you cannot use
the digital functions.
1. From your phone, go to www.movado.com/
boldmotion or search for Movado BOLD in your app
store.
2. Download and install the app onto your phone.
Pairing the watch with your phone
1. Activate the watch: press and hold the button until
lights begin moving around the edge of the dial—it
may take five to ten seconds.
2. Make sure that you have:
a. Charged the watch for at least four hours.
b. Downloaded the Movado BOLD app.
c. Turned on your phone’s Bluetooth. (See the
manufacturer’s instructions for your phone.)
d. Placed the phone and watch near each other.
NOTE: An error message is displayed if your phone is
not supported.
3. Open the Movado BOLD app, and then create an
account.
4. Follow the on-screen instructions to set up your watch.
The phone app automatically searches for nearby
watches.
5. Select your watch. If prompted, press and hold the
watch button until the lights rotate clockwise around
the dial. The phone app notifies you when the phone
and watch have paired successfully.
6. In the phone app, enable notification permissions.
This allows the phone app to access notifications
from other apps on your phone. After you enable
notification permissions, you can use the phone app
to push any notifications from a third-party app to the
watch.
NOTE: If you do not enable notifications in the app, you
cannot receive third-party notifications on the watch.
7. Select PREVIEW ON WATCH and complete the app
tour.
Configuring the watch
After you pair the watch to your phone and complete
the setup process, use the phone app to configure the
watch notifications and preferences, including selecting
notifications to send to the watch and setting high- or low-
priority vibration patterns for each selected notification.
You can also set up to 12 favorite contacts.
Select NOTIFICATIONS or PREFERENCES in the phone
app to change the watch settings. By default, quiet
mode is on and only incoming call and calendar event
notifications are enabled. You will receive incoming call
and calendar event notifications from 7 o’clock AM to
10 o’clock PM.
To turn quiet mode off:
Select PREFERENCES, and then select the slider next
to SILENCE WATCH NOTIFICATIONS BETWEEN XX
and XX.
Select PROGRESS to see your daily, weekly, or monthly
progress towards your daily step goals.
Select HELP to access the user manual, terms of use,
privacy policy, customer service phone number, or other
information about the watch, including the serial number.
You can also verify the remaining digital battery charge
on the phone app home screen.

3
MOVADO BOLD MOTION USER GUIDE
WATCH VIEWS
Press the watch button once to change to the next
watch view in the sequence. The views display in
the following order: analog view, digital time view,
progress tracker view, digital battery view, Bluetooth
view. After five seconds of inactivity in any view, the
watch returns to analog view.
Analog view
In ANALOG VIEW, no lights are illuminated. This is the
default view on your watch.
Digital time view
From ANALOG VIEW, press the watch button once to
see DIGITAL TIME VIEW. In DIGITAL TIME VIEW, the
lights illuminate to show the current time as determined
by the phone app. The Movado dot and the hour light
illuminate. The minute light pulses.
For example, at 10:09, the 10 o’clock light illuminates
and the 1 o’clock light illuminates and then quickly pulses
four times to let you know it is four minutes past 10:05. At
10:10, the 10 o’clock light illuminates and the 2 o’clock
light illuminates and does not pulse to let you know it is
exactly on the minute.
If the hour and minute are represented by the same light,
the light illuminates and then slowly pulses once. If it is
exactly on the minute (for example, 10:50), it does not
pulse again. Otherwise, it quickly pulses the number of
minutes past the marker. At 10:51, the 10 o’clock light
illuminates, slowly pulses once, and then quickly pulses
once.
Progress tracker view
From ANALOG VIEW, press the watch button twice
to see PROGRESS TRACKER VIEW. In PROGRESS
TRACKER VIEW, the lights illuminate clockwise to
indicate your progress toward your daily step goal.
For example, when ten lights illuminate, you have reached
75% of your goal.
When all twelve lights illuminate, you have reached your
goal.

4
MOVADO BOLD MOTION USER GUIDE
Digital battery view
From ANALOG VIEW, press the watch button three times
to see DIGITAL BATTERY VIEW. In DIGITAL BATTERY
VIEW, the lights between 3 and 9 o’clock show the
remaining charge. All seven lights illuminate and then
all dim, except for those indicating the digital battery
charge level.
When all seven lights remain illuminated, the battery
charge level is 100%.
When five lights remain illuminated, the battery charge
level is 75%.
When three lights remain illuminated, the battery charge
level is 50%.
When only the bottom light remains illuminated, the
battery charge level is 25% or less.

5
MOVADO BOLD MOTION USER GUIDE
Bluetooth view
From ANALOG VIEW, press the watch button four times
to see BLUETOOTH VIEW. In BLUETOOTH VIEW, the
lights show the Bluetooth connection status between your
watch and your phone.
If the watch is connected to a phone, the lights from 9
o’clock and from 3 o’clock illuminate and converge at 12
o’clock. Then, the 12 o’clock light illuminates.
If the watch is not connected to a phone, the 12 o’clock
light illuminates, and then the lights illuminate from 12
o’clock to 9 o’clock and 3 o’clock. After the 9 o’clock
and 3 o’clock lights illuminate, the lights from 9 o’clock
and from 3 o’clock illuminate and converge at 12 o’clock.
Then, the 12 o’clock light illuminates.

6
MOVADO BOLD MOTION USER GUIDE
UNDERSTANDING YOUR NOTIFICATIONS
You can use the Movado BOLD app to push notifications
from any third-party app on your phone to the watch.
This includes calendar, messaging, email, and social
media apps. Other third-party apps can also be found
under the OTHER section on the Notification screen of
the phone app.
The watch uses lights and vibration patterns to alert you
when you receive a notification on your phone. You
can customize how and when most notifications occur,
including setting the notification to high priority or low
priority. All notification vibrations not enabled by default
are automatically set to low priority. For information about
changing the priority of a notification, see the section of
this guide about customizing that notification.
The following table describes the default vibration
patterns for notifications.
To dismiss a notification or decline a call, press the watch
button once.
Incoming call notifications
When you have an incoming call, the Movado dot
pulses. The watch vibrates using long pulses until the
call is answered or declined. To decline a call, press
the watch button once.
Progress tracker goal reached notification
When you reach your daily step goal, the Movado dot
illuminates and then all other lights illuminate in sequence.
The watch vibrates three times, one short pulse followed
by one long pulse and one pulse that gradually fades.

7
MOVADO BOLD MOTION USER GUIDE
Calendar event notification
By default, before a calendar event, the watch first
illuminates to indicate that there is an event in 15
minutes, and then illuminates to show time of the event.
For example, a calendar event is scheduled for 11
o’clock. At 10:45, the lights from 9 o’clock through 12
o’clock illuminate to indicate the scheduled event occurs
in 15 minutes. Then, the 11 o’clock light illuminates to
indicate the hour of the event, and the 12 o’clock light
illuminates to indicate the minute of the event.
The watch vibrates four times, one long pulse followed
by three short pulses.
Message notification
When you receive a text or social media private message,
the Movado dot and top three lights pulse quickly. By
default, message notifications are set to high priority and
the watch vibrates four times using short pulses by default.
If message notifications are set to low priority, the watch
vibrates twice using short pulses.
Email notification
When you receive an email, the Movado dot and top
three lights pulse slowly. By default, email notifications
are set to low priority and the watch vibrates twice using
short pulses. If email notifications are set to high priority,
the watch vibrates four times using short pulses.

8
MOVADO BOLD MOTION USER GUIDE
Social media notification
When you receive a notification from a social media
app that is not a private message, the Movado dot and
top three lights pulse slowly. By default, social media
notifications are set to low priority and the watch vibrates
twice using short pulses. If social media notifications are
set to high priority, the watch vibrates four times using
short pulses.
Other notifications
Your watch can receive notifications from any third-party
app on your phone that has optional notifications.
When you receive a notification from a third-party app
set to high priority, the Movado dot and top three lights
pulse quickly. The watch vibrates four times using short
pulses.
When you receive a notification from a third-party app
set to low priority, the Movado dot and top three lights
pulse slowly. By default, other notifications are set to low
priority and the watch vibrates twice using short pulses.
If other notifications are set to high priority, the watch
vibrates four times using short pulses.
Digital battery status notification
There is an automatic notification when the battery that
controls digital functions for your watch is low. The lights
between 3 and 9 o’clock fully illuminate, then dim to
35% brightness. The bottom light pulses to indicate
that the digital battery level is critically low. The watch
vibrates twice using short pulses.

9
MOVADO BOLD MOTION USER GUIDE
MANAGING INCOMING CALL NOTIFICATIONS
Declining an incoming call using your watch
When you receive an incoming call notification, press
the watch button once to decline the call.
Enabling or disabling incoming call notifications
1. In the phone app, select NOTIFICATIONS.
2. Tap the button next to CALLS to turn notifications on
or off.
CUSTOMIZING MESSAGE NOTIFICATIONS
Enabling or disabling all message notifications
1. In the phone app, select NOTIFICATIONS.
2. Tap the button next to MESSAGING to turn
notifications on or off.
Enabling or disabling notifications from a specific
messaging app
1. In the phone app, select NOTIFICATIONS.
2. Next to MESSAGING, tap EDIT.
3. To enable notifications from a messaging app, select
it. To disable notifications from a messaging app,
clear it.
NOTE: On a phone running iOS, the text message app
preloaded on your phone is listed as SMS. All other
messaging apps are listed by their name.
Changing the priority of all message notifications
1. In the phone app, select NOTIFICATIONS.
2. Next to MESSAGING, tap EDIT.
3. Tap the slider next to PRIORITY to select either low or
high priority.
CUSTOMIZING EMAIL NOTIFICATIONS
Enabling or disabling all email notifications
1. In the phone app, select NOTIFICATIONS.
2. Tap the button next to EMAIL to turn notifications on
or off.
Enabling or disabling notifications from a specific
email app
1. In the phone app, select NOTIFICATIONS.
2. Next to EMAIL, tap EDIT.
3. To enable notifications from an email app, select it.
To disable notifications from an email app, clear it.
Changing the priority of all email notifications
1. In the phone app, select NOTIFICATIONS.
2. Next to EMAIL, tap EDIT.
3. Tap the slider next to PRIORITY to select either low or
high priority.
CUSTOMIZING CALENDAR EVENT NOTIFICATIONS
Enabling or disabling all calendar event notifications
1. In the phone app, select NOTIFICATIONS.
2. Tap the button next to CALENDAR to turn notifications
on or off.
Enabling or disabling notifications from a specific
calendar
1. In the phone app, select NOTIFICATIONS.
2. Next to CALENDAR, tap EDIT.
3. Scroll to the name of the app.
4. To enable notifications from a calendar for that app,
select it. To disable notifications from a calendar for
an app, clear it. For example, you might select both
the OFFICE and BIRTHDAYS calendars for an app.
CUSTOMIZING SOCIAL MEDIA NOTIFICATIONS
Enabling or disabling all social media notifications
NOTE: To turn on notifications for private messages from
a social media app, see CUSTOMIZING MESSAGE
NOTIFICATIONS.
1. In the phone app, select NOTIFICATIONS.
2. Tap the button next to SOCIAL to turn notifications
on or off.
Enabling or disabling notifications from a specific
social app
1. In the phone app, select NOTIFICATIONS.
2. Next to SOCIAL, tap EDIT.
3. To enable notifications from a social media app,
select it. To disable notifications from a social media
app, clear it.
Changing the priority of all social media notifications
1. In the phone app, select NOTIFICATIONS.
2. Next to SOCIAL, tap EDIT.
3. Tap the slider next to PRIORITY to select either low or
high priority.

10
MOVADO BOLD MOTION USER GUIDE
CUSTOMIZING OTHER THIRD-PARTY APP
NOTIFICATIONS
Enabling or disabling all other third-party app
notifications
1. In the phone app, select NOTIFICATIONS.
2. Tap the button next to OTHER to turn notifications on
or off.
Enabling or disabling notifications from a specific
uncategorized third-party app
1. In the phone app, select NOTIFICATIONS.
2. Next to OTHER, tap EDIT.
3. To enable notifications from a third-party app, select
it. To disable notifications from a third-party app,
clear it.
Changing the priority of all other third-party app
notifications
1. In the phone app, select NOTIFICATIONS.
2. Next to OTHER, tap EDIT.
3. Tap the slider next to PRIORITY to select either low or
high priority.
MANAGING PROGRESS TRACKER
Use the progress tracker to monitor your progress toward
your daily step goal and to view graphs of your weekly
and monthly step goal achievements.
Enabling and disabling progress tracker
To enable or disable the progress tracker:
1. In the phone app, select PREFERENCES.
2. Next to PROGRESS TRACKING, tap the button.
When the button is blue, tracking is enabled. When
the button is white, tracking is disabled.
Viewing your progress toward your daily step goal
From ANALOG VIEW, press the watch button twice.
The lights illuminate clockwise to indicate your progress
toward your daily step goal. When all twelve lights
illuminate, you have reached your goal.
View your daily step for the day, week, or month
1. In the phone app, select PROGRESS. Your daily step
count and goal are displayed.
2. Tap WEEK or MONTH to view your progress toward
your daily step goals for the current week or month.
If the watch becomes disconnected from the phone, it
continues to collect progress tracker data but cannot
send the data to the phone app. The phone app
displays when the progress tracker data last updated.
When you connect the watch to the phone again, the
data is sent to the phone app. If the watch remains
disconnected from the phone for more than two days,
some data might be lost.
Changing your daily step goal
1. In the phone app, select PREFERENCES.
2. Next to DAILY GOAL, tap the current number of steps.
3. Tap the Daily Goal Set box and enter your target
number of steps per day.
4. Tap SAVE.
CHECKING WATCH DIGITAL BATTERY STATUS
Low digital battery notification
There is an automatic notification when the battery that
controls digital functions is low. The lights between 3 and
9 o’clock fully illuminate, then dim to 35% brightness.
The bottom light pulses to indicate that the digital battery
level is critically low. The watch vibrates twice using
short pulses.
Checking watch digital battery status in your phone app
View the digital battery status for your watch at the
bottom of the home screen, next to the watch graphic.
NOTE: To check battery status on your watch, see
DIGITAL BATTERY VIEW.
MANAGING FAVORITE CONTACTS
Setting your favorite contacts
You can set up to 12 people as your favorite contacts.
You can use the favorite contacts list to filter calls and text
messages.
1. In the phone app, select NOTIFICATIONS.
2. Next to FAVORITE CONTACTS, select EDIT.
3. To remove a favorite contact, select the X next to their
name.
4. To add a favorite contact, select ADD CONTACTS.
5. Scroll or use the search field to locate the name of a
contact saved in your phone. Select the name to add
the contact to your favorites.
6. Select DONE.

11
MOVADO BOLD MOTION USER GUIDE
Customizing favorite contact notifications
After you configure your favorite contacts list, you receive
custom notifications when a favorite contact calls or
messages you.
When the first contact in your favorite contacts list calls or
messages you, the Movado dot and the one o’clock light
illuminate.
When the second contact in your favorite contacts list
calls or messages you, the Movado dot and the lights
from one o’clock to two o’clock illuminate. When the
third contact in your favorite contacts list calls or messages
you, the Movado dot and the lights from one o’clock to
three o’clock illuminate. This pattern continues for all
favorite contacts, so that when the twelfth contact in your
favorite contacts list calls or messages you, the Movado
dot and the lights from one o’clock to twelve o’clock
illuminate.
To change the custom notification for a favorite contact,
edit your favorite contacts list to change their position in
the list.
Receiving notifications from favorite contacts only
To receive call and text message notifications from only
your favorite contacts:
1. In the phone app, select NOTIFICATIONS.
2. Next to FAVORITE CONTACTS, tap the slider next to
EDIT to turn notifications from only favorite contacts on
or off.
MANAGING QUIET MODE
By default, quiet mode is on and only incoming call and
calendar event notifications are enabled. You will receive
incoming call and calendar event notifications from 7
o’clock AM to 10 o’clock PM.
You can manage this setting the phone app to adjust the
time period when notifications are disabled or to turn
quiet mode off.
To configure quiet mode:
1. In the phone app, select PREFERENCES.
2. Select the slider next to SILENCE WATCH
NOTIFICATIONS BETWEEN XX and XX to turn quiet
mode on or off. This starts and ends quiet mode at
a specific time and can be set to reoccur, like an
alarm. Only device alerts and specifically configured
notifications are displayed on the watch in this mode.
All lights on the watch dim.
3. Click the time next to START TIME or END TIME to set
the start and end times.
MANAGING THE CONNECTION BETWEEN YOUR
WATCH AND THE PHONE
Verifying the Bluetooth connection status on the watch
From ANALOG VIEW, press the watch button four times
to display BLUETOOTH VIEW.
In BLUETOOTH VIEW, the lights show the Bluetooth
connection status between your watch and your phone.
See Page e for dial illustrations.
Verifying the Bluetooth connection status on the phone
app
The status of the Bluetooth connection between your
watch and your phone is displayed at the bottom of the
home screen, next to the watch graphic.

12
MOVADO BOLD MOTION USER GUIDE
Reconnecting the watch to your phone
If your phone and your watch are out of range of each
other for more than an hour, the Bluetooth connection is
dropped and must be reconnected.
1. Ensure that the phone and watch are within range of
each other.
2. Press the watch button.
In pairing mode, two lights on opposite sides of the dial
illuminate and cycle clockwise until a connection is made,
pairing mode is cancelled, or pairing mode times out.
When the watch connects to a phone, the 12 o’clock
light pulses twice.
3. If the phone and watch do not reconnect, open the
app on your phone.
4. If the phone and watch still do not reconnect, close
and restart your phone app. See the manufacturer’s
instructions for your phone.
SETTING YOUR PHONE TO AIRPLANE MODE
When airplane mode is on, the watch still receives
progress tracker and device notifications. General
notifications, such as calendar meetings, are disabled.
To turn airplane mode on, press and hold the watch
button until all twelve lights illuminate and then dim on
both sides, from bottom to top. Release the watch button.
To turn airplane mode off, press and hold the watch
button until all twelve lights illuminate and then dim on
both sides, from top to bottom. Release the watch button.
NOTE: You can enable or disable this feature only in
ANALOG VIEW.
PAIRING THE WATCH TO A DIFFERENT PHONE
You might want to use the watch with a different phone or
transfer ownership of the watch.
1. In the phone app, select PREFERENCES, and then tap
SIGN OUT.
NOTE: Your locally stored user data might be deleted.
2. Select OK to confirm that you want to sign out. When
finished, the phone app returns to the login screen.
3. A prompt to FORGET WATCH appears. If you select
OK, the watch automatically resets to factory settings.
If you select Skip, you must press and hold the watch
button for 22 seconds to manually reset the watch to
factory settings.
4. If prompted, select OK.
5. If you are using Android, you can now pair the
watch to a different phone. If you are using iOS,
open your phone Settings, and then select Bluetooth.
Tap the I icon next to Movado, and then tap
FORGET THIS DEVICE. You can now pair the watch to
a different phone.
PAIRING THE PHONE TO A DIFFERENT WATCH
You can only pair one watch to the phone at a time.
1. In the phone app, select PREFERENCES.
2. Tap FORGET WATCH.
3. Select OK to confirm that you want to forget the watch.
4. If prompted, select OK.
5. Pair the new watch to the phone.
REINSTALLING THE PHONE APP
You might need to uninstall and reinstall the phone
app. You must reconnect the watch to your phone after
reinstalling the phone app.
If you are using Android, you should be able to reconnect
the watch to the phone. If you are using iOS, open your
phone Settings, and then select Bluetooth. Tap the I icon
next to Movado, and then tap FORGET THIS DEVICE.
You can now pair the watch to the phone again.
UPDATING YOUR WATCH
When a software update is available, a notification is
displayed at the bottom of the phone app home screen.
1. Select INSTALL NOW and then START INSTALLATION
to install the update.
NOTE: Do not press the watch button or close the phone
app until the update is complete.
2. When the update is complete, select DONE.
If you receive an error message, tap RETRY.

13
MOVADO BOLD MOTION USER GUIDE
RESETTING YOUR WATCH TO FACTORY SETTINGS
NOTE: Resetting the watch to factory settings removes all
user data from the watch. Reset the watch only if you are
experiencing a serious problem that has not been solved
after trying all other troubleshooting methods, or if you
want to pair the watch with a different phone. Use one
of the following methods:
If your watch is connected to your phone, use the phone
app to reset your watch.
1. In the app, select PREFERENCES.
2. Tap FORGET WATCH.
3. In the confirmation dialog, tap PROCEED.
If your watch is not connected to your phone, use the
watch button to reset your watch.
Press and hold the watch button. After all lights cycle
clockwise once, release the button.
Then, all lights cycle counterclockwise. During the six
seconds the lights cycle counterclockwise, you can
press the button to cancel the reset. After the lights cycle
counterclockwise, all lights pulse, and then the watch
resets.
CARE AND MAINTENANCE
Charging and replacing the watch batteries
The watch contains two batteries. One battery controls
the digital functions of the watch and can be recharged.
The other battery controls the analog functions of the
watch and is not rechargeable. Under normal use, the
battery that controls the analog functions of the watch
should last approximately two years.
Never open the watch yourself. If your watch needs
repair or adjustment, take or mail it directly to a Movado
Authorized Service Center. Do not attempt to change
the batteries yourself. If one or both of your batteries
needs to be changed, take or send your watch to a
Movado Authorized Service Center to have battery(ies)
changed. To locate a service center in your region, visit
http://www.mgiservice.com/movado and click FIND
AN AUTHORIZED WATCH REPAIR LOCATION.
NOTE: The Movado Watch Company assumes
responsibility only for service performed at its Authorized
Service Centers.
Cleaning the connection pins of the watch and charger
Each time you need to charge your watch, disconnect
the charger from power and thoroughly wipe the charger
and watch contact pins with a soft, lint-free cloth before
connecting the charger to power and then to the watch.
If necessary, you may dampen the cloth with a small
amount of isopropyl rubbing alcohol. Never use soap
or any chemicals other than isopropyl rubbing alcohol to
clean the contact pins for the watch or charger.
Caring for your watch strap
While the life span of a watch strap depends on your
care and wearing habits, as well as the climate in which
you live, proper care will extend its life.
To help preserve the natural elasticity and quality of your
watch strap, wipe the strap with a soft cloth soaked in
fresh water or a dilute detergent if the strap has been
exposed to salt water, chemicals, isopropyl alcohol, or
abrasive substances. Contact with acetone, ethyl alcohol,
organic solvents, and perfume should be avoided.
NOTE: Movado watch straps are not covered by the
Movado watch warranty.
Water resistance
All Movado watches are tested to meet international
standards for water resistance. This style is resistant
to 50 meters (5 ATM), as marked on the case back;
however, because of its connectivity feature, Movado
recommends not wearing your Movado BOLD Motion
watch when showering or swimming. You should avoid
submerging the watch in water or allowing the contact
pins to get wet. Moisture and electrolyte residues (salts
and chlorides) can cause corrosion and possibly short
circuit the contact pins.
If the contact pins get wet, wipe them with isopropyl
alcohol, and then dry them with a soft cloth. The contact
pins must be moisture-free before you attach the charging
cable.
CAUTION: Do not subject your watch to a pressure/
depth greater than 50 meters (5 ATM), or your watch
could be damaged and your warranty voided.
IMPORTANT: Do not operate the watch button or pull the
crown out while the watch is wet or underwater.

14
MOVADO BOLD MOTION USER GUIDE
NOTE: The Movado Watch Company will not be
responsible for any damage caused by or related to
leakage originating from improper handling or damage
to the case, crown, gaskets, or crystal.
To maintain water resistance, yearly maintenance is
required. The gaskets and crown that seal the case are
subject to wear and deterioration under normal use. These
parts should be inspected and replaced as needed each
time the watch is opened for service, including battery
changes. Your Authorized Movado Service Center will
automatically retest your watch for water resistance as a
routine step in all service orders.
Water resistance applies only to the watch case; some
watch straps should not be worn under water or subjected
to wet conditions.
Avoid exposing your watch to sudden and excessive
temperature variations.
Do not drop your watch or bang it against a hard surface.
Water resistance must be rechecked after every violent
shock. Clean your watch regularly by wiping it with a
soft cloth dampened with fresh water, especially after
exposure to seawater.
WARRANTY AND SUPPORT
Your Movado BOLD Motion watch comes backed by a
2-year limited warranty. For full terms and conditions, visit
www.movado.com/boldmotion.
For customer service support, visit www.movado.com/
boldmotion.

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
If you have questions about the product that are not related to this declara-
tion, write to:
Movado Group, Inc.,
650 From Rd., Suite 375
Paramus, NJ 07652
or call Movado Group at 1-800-810-2311.
For questions regarding this FCC declaration, write to:
HP Inc., 1501 Page Mill Road,
Palo Alto, CA 94304
or call HP at 650-857-1501.
To identify your product, refer to the part, series, or model number located
on the product.
MODIFICATIONS
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by HP may void the
user’s authority to operate the equipment.
CABLES
To maintain compliance with FCC Rules and Regulations, connections to this
device must be made with shielded cables having metallic RFI/EMI connec-
tor hoods.
CANADA NOTICES
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations CAN ICES-3(B)/NMB-3(B).
If this device has WLAN or Bluetooth capability, the device complies with
Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
AVIS CANADIEN
Ce dispositif numérique de Classe B répond aux exigences de la réglemen-
tation du Canada relative aux équipements causant des interférences CAN
ICES-3(B)/NMB-3(B). Si ce dispositif est doté de fonctionnalités de réseau
sans fil ou Bluetooth, il est conforme aux normes d’exemption de licence RSS
d’Industrie Canada. Son fonctionnement est assujetti aux deux conditions
suivantes :
1) Ce dispositif ne doit causer aucune interférence dangereuse,
et 2) ce dispositif doit accepter toute interférence reçue, y compris les inter-
férences pouvant provoquer un fonctionnement indésirable.
CHEMICAL SUBSTANCES
Movado and HP are committed to providing our customers with information
about the chemical substances in our products as needed to comply with
legal requirements such as REACH (Regulation EC No1907/2006 of the
European Parliament and the Council). A chemical information report for this
product can be found at WWW.HP.COM/GO/REACH.
SUSTANCIAS QUÍMICAS
HP se compromete con la tarea de brindar a nuestros clientes información
acerca de los productos químicos incluidos en nuestros productos necesaria
para cumplir con requisitos legales como REACH (Regulación EC N.º
1907/2006 del Parlamento Europeo y del Consejo). Podrá encontrar un
informe con los datos químicos relacionados con este producto en WWW.
HP.COM/GO/REACH.
SUBSTANCES CHIMIQUES
HP s’engage à fournir à ses clients des informations concernant les substanc-
es chimiques contenues dans ses produits, conformément aux dispositions
légales telles que REACH (Règlement CE n° 1907/2006 du Parlement Eu-
ropéen et du Conseil de l’Union Européenne). Un rapport d’informations sur
les substances chimiques de ce produit est disponible à l’adresse WWW.
HP.COM/GO/REACH.
EUROPEAN UNION REGULATORY NOTICES
DECLARATION OF CONFORMITY
Hereby, Movado declares that this equipment: Movado BOLD Motion is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC. The full Declaration of Conformity can be found at
the following web site:
WWW.MOVADO.COM/BOLDMOTION/CEDOC. For regulatory matters
the manufacturer, Movado Group, Inc., can be contacted at: 1-800-810-
2311.
For regulatory matters the importer, HP Inc., can be contacted at: HP, HQ-
TRE, 71025 Boeblingen, Germany.
BATTERY NOTICES
The battery(ies) in this product cannot be easily replaced by users themselves.
Removing or replacing the battery could affect your warranty coverage. If a
battery is no longer holding a charge, contact support.
When a battery has reached the end of its useful life, do not dispose of the
battery in general household waste. Follow the local laws and regulations in
your area for battery disposal.
ELECTRONIC HARDWARE AND BATTERY RECYCLING
Movado and HP encourage customers to recycle used electronic hardware
and rechargeable batteries. For more information about recycling programs,
see the HP web site at WWW.HP.COM/RECYCLE.
DISPOSAL OF WASTE EQUIPMENT BY USERS
This symbol means do not dispose of your product with your other
household waste. Instead, you should protect human health and
the environment by handing over your waste equipment to a designated col-
lection point for the recycling of waste electrical and electronic equipment.
For more information, please contact your household waste disposal service
or go to WWW.HP.COM/RECYCLE.
Copyright ©2015 Movado Group, Inc. ANDROID is a trademark of
Google Inc. BLUETOOTH i s a trademark owned by the Bluetooth SIG and
is used by Movado under license. MOVADO and MOVADO BOLD are
trademarks of Movado Group, Inc. and/or its affiliates.
Copyright ©2015 Movado Group, Inc. ANDROID est une marque de
commerce de Google Inc. BLUETOOTH est une marque de commerce ap-
partenant à Bluetooth SIG et utilisée sous licence par Movado. MOVADO et
MOVADO BOLD sont des marques de commerce de Movado Group, Inc.
et/ou de ses sociétés affiliées.
830139-004
FEDERAL COMMUNICATIONS COMMISSION NOTICE