Moxa Technologies BXP Series User manual

P/N: 1802001001010
*1802001001010*
BXP Series
Quick Installation Guide
Embedded Computers
Version 1.0, September 2023
Technical Support Contact Information
www.moxa.com/support

2023 Moxa Inc. All rights reserved.

- 2 -
Overview
The BXP Series wall-mount computers are powered by an Intel Atom®,
Intel® Celeron®, or Intel® Core™ i5/i7 processor. The computers
come with a rich set of interface options including up to 10 software-
selectable RS-232/422/485 serial ports, up to 10 gigabit Ethernet ports,
4 digital inputs, and 4 digital outputs. The communication interfaces are
located on the front and rear sides of the product, enabling easy access
and expansion for industrial applications. A dual-storage design that
includes CFast and SD slots enables easy storage expansion. The
unique battery fastener cover design for the battery slot secures the
battery in place and ensures stability in all operating environments.
Package Checklist
Each basic system model package is shipped with following items:
•BXP Series embedded computer
•Wall-mounting kit
•2-pin terminal block for DC power
•10-pin terminal block for DI/DO
•Quick installation guide (printed)
•Warranty card
NOTE
Notify your sales representative if any of the above items are
missing or damaged.
Hardware Overview
Front View
BXP-C100-C1-T/BXP-C100-C5-T/BXP-C100-C7-T Models
BXP-C100-C1-8L-T/BXP-C100-C5-8L-T/BXP-C100-C7-8L-T Models

- 3 -
BXP-C100-C1-8C-T/BXP-C100-C5-8C-T/BXP-C100-C7-8C-T Models
BXP-C100-C1-2L3C-T/BXP-C100-C5-2L3C-T/BXP-C100-C7-2L3C-T Models
BXP-A100-E2-T/BXP-A100-E4-T Models
BXP-A100-E2-8L-T/BXP-A100-E4-8L-T Models

- 4 -
BXP-A100-E2-8C-T/BXP-A100-E4-8C-T Models
BXP-A100-E2-2L3C-T/BXP-A100-E4-2L3C-T Models
Rear View
BXP-C100-C1-T/BXP-C100-C5-T/BXP-C100-C7-T/BXP-A100-E2-T/BXP-
A100-E4-T Models
BXP-C100-C1-8L-T/BXP-C100-C5-8L-T/BXP-C100-C7-8L-T/BXP-A100-E2-
8L-T/BXP-A100-E4-8L-T Models

- 5 -
BXP-C100-C1-8C-T/BXP-C100-C5-8C-T/BXP-C100-C7-8C-T/BXP-A100-E2-
8C-T/BXP-A100-E4-8C-T Models
BXP-C100-C1-2L3C-T/BXP-C100-C5-2L3C-T/BXP-C100-C7-2L3C-T/BXP-
A100-E2-2L3C-T/BXP-A100-E4-2L3C-T Models
Dimensions
BXP-C100-C1-T/BXP-C100-C5-T/BXP-C100-C7-T/BXP-A100-E2-T/BXP-
A100-E4-T Models

- 6 -
BXP-C100-C1-8L-T/BXP-C100-C5-8L-T/BXP-C100-C7-8L-T/BXP-A100-E2-
8L-T/BXP-A100-E4-8L-T Models
BXP-C100-C1-8C-T/BXP-C100-C5-8C-T/BXP-C100-C7-8C-T/BXP-A100-E2-
8C-T/BXP-A100-E4-8C-T Models
BXP-C100-C1-2L3C-T/BXP-C100-C5-2L3C-T/BXP-C100-C7-2L3C-T/BXP-
A100-E2-2L3C-T/BXP-A100-E4-2L3C-T Models

- 7 -
LED Indicators
The following table describes the LED indicators located on the front
panel of BXP computers.
LED Name
Status
Function
Power
Green
Power is ON
OFF
No power input or any other power error
Ethernet
(10/100
Mbps)
(1000 Mbps)
Green Steady ON: 10/100 Mbps Ethernet link
Blinking: Data is being transmitted or
received
Yellow Steady ON: 1000 Mbps Ethernet link
Blinking: Data is being transmitted or
received
OFF
No Ethernet connection
Storage
(CFast)
Yellow
Blinking: Data is being accessed from the
CFast card
OFF
Data is not being accessed from the
CFast card
Installing the BXP Computer
The BXP computer comes with two wall-mounting brackets. Attach the
brackets to the computer using three screws on each side as indicated
in the diagram.
The six screws for the mounting brackets are included in the product
package. Refer to the following illustrations for detailed specifications.

- 8 -
To mount a BXP computer to a wall or cabinet, use two screws on each
side for the mounting brackets as shown in the illustration.
NOTE
Th
e four screws for attaching the wall-mounting
brackets to the
wall or cabinet
are NOT included in the product package; they
need to be purchased separately.
The specifications of the 4
screws to be purchased
separately is indicated in the
diagram.
After mounting the BXP computer using the wall-mounting kit and
fastening the 4 screws to fix the mounting brackets to the wall or
cabinet, push the computer downwards to ensure that the device is
securely fixed to the mounting surface.
NOTE
This computer is intended to be installed
only in an area with
restricted access. In addition, for safety reasons, the computer
should be installed and h
andled only by qualified and
experienced professionals.

- 9 -
Connecting the Power
The BXP computer is provided with 2-pin power input connectors in a
terminal block on the front panel. Insert the power-cord wires into the
connectors and tighten them to secure the wires in place. Push the
power button. The power LED will light up to indicate that power is
being supplied to the computer. It should take about 30 to 60 seconds
for the operating system to complete the boot-up process.
Pin
Definition
1
V+
2
V-
The power input specification is given below:
•The DC power source rating is 12 VDC @ 6.65 A or 24 VDC @ 3.30
A
•A minimum wire gauge of 18 AWG is required.
For surge protection, connect the grounding connector located below
the power connector with the earth (ground) or a metal surface.
NOTE
This computer is designed to be supplied by listed equipment
rated 12 VDC
(max)@6.65 A or 24 VDC (max)@3.30 A, and
Tma
= 60˚C. If you need assistance with purchasing a power
adapter, contact the Moxa technical support team.
NOTE
If using Class I adapter, the power cord adapter should be
connected to a socket outlet with an earthing connection or the
power cord and adapter must comply with Class II construction.
ATTENTION
Before connecting the
BXP computer to the DC power inputs,
make sure the DC power source voltage is stable.
•
The wiring for the input terminal block shall be installed by
a skilled person.
•
Wire type: Cu
•
Only use 18-12 AWG wire size and a torque value of 0.5 N-
m.
•
Use only one conductor in a clamping point between the
DC power source and the power input.
Warning
為避免電磁干擾，本產品不應安裝或使用於住宅環境。

- 10 -
Connecting Displays
The BXP computer comes with a VGA and a HDIM display output
located on the front panel.
NOTE
For highly reliable video streaming, use premium HDMI-
certified cables.
Communications Connections
USB Ports
The BXP Series computer comes with 2 USB 3.0 ports and 2 USB 2.0
ports on the front panel. An additional 2 USB 2.0 ports are located on
the rear panel. The USB ports can be used to connect to peripherals,
such as keyboard, mouse, or flash drives for expanding the system’s
storage capacity.
Serial Ports
The BXP computer comes with 2 software-selectable RS-232/422/485
serial ports on the rear panel. Additional serial ports are located on the
front panel. The ports use DB9 male connectors.
Refer to the following table for pin assignments:
Pin RS-232 RS-422
RS-485
(4-wire)
RS-485
(2-wire)
1
DCD
TxDA(-)
TxDA(-)
–
2
RxD
TxDB(+)
TxDB(+)
–
3
TxD
RxDB(+)
RxDB(+)
DataB(+)
4
DTR
RxDA(-)
RxDA(-)
DataA(-)
5
GND
GND
GND
GND
6
DSR
–
–
–
7
RTS
–
–
–
8
CTS
–
–
–
Ethernet Ports
The BXP computer has 2, 4, or 10 10/100/1000 Mbps Ethernet ports
with RJ45 connectors on the front panel. Refer to the following table for
the pin assignments:
Pin
10/100 Mbps
1000 Mbps
1
ETx+
TRD(0)+
2
ETx-
TRD(0)-
3
ERx+
TRD(1)+
4
–
TRD(2)+
5
–
TRD(2)-
6
ERx-
TRD(1)-
7
–
TRD(3)+
8
–
TRD(3)-
NOTE
For reliable Ethernet connections, we recommend enabling the
ports in standard temperatures and
keeping them enabled in
high/low temperature environment.