MRHANDSFREE BLUE VISION I User manual

M_BlueVision_Cover.pmd 30.05.2006, 16:052

Illustration I Illustration II
Illustration III Illustration IV
M_BlueVision_Ill.pmd 05.05.2006, 11:061

TABLE OF CONTENTS
SAFETY INSTRUCTIONS ................................................................................ 2
WHAT DOES MR HANDSFREE BLUE VISION INCLUDE? ............................. 2
OVERVIEW ...................................................................................................... 2
GETTING STARTED ........................................................................................ 3
OPERATION ..................................................................................................... 6
TROUBLE-SHOOTING ..................................................................................... 9
BLUETOOTH®................................................................................................ 10
TECHNICAL DATA ......................................................................................... 10
CARE AND MAINTENANCE ........................................................................... 10
GUARANTEE .................................................................................................. 11
M_BlueVision_GB.pmd 04.05.2006, 17:481

GB 2
SAFETY INSTRUCTIONS
1. Make sure that the operation of the carkit will never influence your safety.
2. Make sure not to impact the steering or braking system or other key systems essential for proper
operation of the car when installing the carkit. Make sure that the deployment of the airbag is
not blocked or impaired in any way.
3. The carkit may only be used at an operating voltage of 12-24V with the minus pole earthed.
Failure to observe this requirement may result in damage to the car’s electronics system.
4. Make sure that the visor mounting cannot cause any damage to your body in case of an
accident.
WHAT DOES MR HANDSFREE BLUE VISION INCLUDE?
See Illustration I
1. Handsfree unit with built-in speaker
2. Lithium-Polymer rechargeable battery
3. Clip for sun visor fixation
4. AC adapter for connecting the Blue Vision to the mains power (100V – 240V)
5. Cigarette plug for connecting the Blue Vision to the power supply of the car via cigarette lighter
(12 – 24V)
6. VELCRO-parts
OVERVIEW
See Illustration II
1. Speaker
M_BlueVision_GB.pmd 04.05.2006, 17:482

GB 3
2. Volume Up button:
• Increase the volume
• Office mode
3. Volume Down button:
• Decrease the volume
• Car mode
4. Power On/Off button
5. Talk button:
• Answering calls
• Pairing
6. Reject button:
• Ending calls
• Rejecting calls
7. Built-in microphone
8. Charging socket
9. Service socket
10. Battery status indicator
GETTING STARTED
The mr Handsfree Blue Vision is compatible with most Bluetooth®mobile phones.
Since devices with Bluetooth®technology communicate through radio waves, your carkit and your
mobile phone do not need to be in direct line-of-sight. The 2 devices only need to be within a
maximum of 10 meters of each other, so you do not need to take your phone out of your pocket or bag
to make and receive calls via the carkit.
Since Bluetooth®phones produced by different manufacturers provide various functionalities, some
functions described in this user’s manual could be different or may not be available.
M_BlueVision_GB.pmd 04.05.2006, 17:483

GB 4
CHARGING THE BATTERY
See Illustration III
The mr Handsfree Blue Vision comes with a Lithium-Polymer rechargeable battery. The battery is
charged preliminary, but nevertheless we recommend charging it before using the carkit for the first
time.
Insert the battery in the battery compartment as indicated in the illustration. Attach the sun visor
clip to your Blue Vision if you are going to use the carkit in your car by fixing it on the sun visor.
Plug the adapter jack into the carkit and the AC adapter or the cigarette plug into a power socket.
A red or green light will light under the power button (4) when the charging process begins. If the
power button (4) lights red, the carkit should be charged until the button will light green. Unplug
the AC adapter or the vehicle charger from the carkit.
Note:
• To obtain a fully charged battery and to get the maximum characteristics of talk time and
standby time, we recommend continuing the charging process one hour extra from the moment
that the power button starts to light green.
• You can use the Blue Vision during the charging process.
Warning:
Using an AC adapter other than the one provided may damage or destroy your carkit.
We recommend using only original mr Handsfree accessories.
TURNING THE CARKIT ON/OFF
To turn on the carkit, press and hold the power button (4) for 5 seconds until all buttons will light and
you will hear a melody. The battery status indicator (10) will start to flash. If the light is green, the
battery charging level is high. If it is red, the level is low.
To turn off the carkit, press and hold the power button (4) for 5 seconds until all buttons will light and
you will hear a melody.
M_BlueVision_GB.pmd 04.05.2006, 17:484

GB 5
PAIRING
You are required to pair the Blue Vision with your mobile phone before using it.
Your Blue Vision can store pairing information for up to 2 different Bluetooth®telephones. When an
attempt to pair more than 2 devices is made, the oldest paired device is removed from the memory.
When any of the paired devices is in the range of 10 meters and the Blue Vision is turned on, the
Blue Vision will automatically initiate a connection with the last mobile phone it was connected to.
In case this phone is not available, the Blue Vision will automatically search for the second paired
phone for connection. The Blue Vision can have one active connection.
Make sure that your phone and the carkit are switched on. Press and hold the Talk button (5) for
more than 5 seconds until you hear a melody and buttons 2, 3 and 5, 6 flash alternately. The pairing
mode is now activated for two minutes (during these 2 minutes, the buttons will keep on flashing). 
Enter your phone’s Bluetooth®menu and make sure that the Bluetooth®feature is activated. Enter
the submenu where you can set the phone to search for Bluetooth®devices and start the search. 
The phone will search all Bluetooth®devices within about 10 meters and display them as a list. 
Select the Blue Vision from the list. Enter the passkey “0000” to pair and connect the Blue Vision
to your phone. The carkit’s buttons will stop blinking and “Blue Vision” appears in the phone menu
where you can view the Bluetooth®devices that are currently paired with your phone.
Note:
You only need to pair the Blue Vision and your phone once. Each time the carkit is switched on, it
will try to restore the connection with the mobile phone.
The Bluetooth®connection between the Blue Vision and your mobile phone will automatically
disconnect when one of the devices has been switched off or when one of the devices is out of range.
To restore the connection between your mobile phone and the Blue Vision, both devices need to be
turned on and they should be within 10 meters of each other. The following step depends on your
mobile phone type:
M_BlueVision_GB.pmd 04.05.2006, 17:485

GB 6
• Some phones will restore the connection automatically.
• For most mobile phones, you should press the Talk button (5) of the Blue Vision to restore the
connection.
• For other phones it is necessary to restore the connection via the phone’s menu.
Note:
For all mobile phone types, it is recommended to set “Trust” or “Authorized” for Blue Vision in the
Bluetooth®menu of your mobile phone. Please refer to the manual of your mobile phone for more
detailed information.
OPERATION
Before using the mr Handsfree Blue Vision make sure that:
• The carkit is paired and connected to your phone.
• The phone’s Bluetooth®feature is on; see your phone’s user’s manual.
• The carkit is switched on and the battery status indicator is blinking.
INSTALLATION IN THE CAR
See Illustration IV
Fix the carkit on the sun visor using the special clip and turn the microphone (7) to your mouth.
This is the main working position of the microphone holder: the front microphone should be directed
to your mouth and the rear microphone to the speaker phone metal shield.
Note:
We advise not to change the microphone position during the activated call, since an echo effect
could appear. If you follow this advice, you will have a comfortable duplex communication mode of
your phone conversation.
M_BlueVision_GB.pmd 04.05.2006, 17:486

GB 7
MAKING A CALL
Using your mobile phone’s keypad
Dial a number on the keypad. Press the phone’s Talk button.
Using voice dialing
When no call is in progress, press the Talk button (5) once. You will hear a tone that indicates that
you can say the desired name (“voice tag”). Say the voice tag. The phone plays the voice tag
and dials the related phone number.
You can also activate voice dialing with your phone. For details on voice dialing, please refer to your
phone’s user’s manual. Please note that the voice dialing function is only available if it is supported
by your mobile phone.
ENDING A CALL
Press the Reject button (6) to end the currently active call or end the call with your mobile phone.
ANSWERING A CALL
After you hear the ring tone, press the Talk button (5).
AUTOMATIC ANSWER
If the Automatic answer function is set on your phone, the phone automatically answers the incoming
call after some rings.
REDIALING THE LAST DIALED NUMBER
Press the Reject button (6) while no call is in progress. You will hear a confirmation beep. The
phone will dial the last dialed number.
REJECTING AN INCOMING CALL
If you do not want to answer an incoming call, you can reject the call by pressing the Reject button (6).
M_BlueVision_GB.pmd 04.05.2006, 17:487

GB 8
ADJUSTING THE CARKIT SPEAKER VOLUME
When your phone and the carkit just paired, the volume is set in the middle level automatically. Press
the Volume Up button (2) to increase the volume level or the Volume Down button (3) to decrease the
volume.
When the maximum or minimum level of the carkit’s speaker is reached, you will hear a loud beep tone.
OFFICE / CAR MODE
Office mode creates the appropriate sound sensitivity to provide optimal performance of the Blue
Vision in the office or at home.
To activate the Office mode, press and hold the Volume Up button (2) for three seconds. If the
Office mode is activated the keypad will blink during a call.
To activate the Car mode, press and hold the Volume Down button (3) for three seconds. If the Car
mode is activated the keypad will light continuously during a call.
DISCONNECTING THE CARKIT FROM THE MOBILE PHONE
You can disconnect the carkit from your phone when, for example, you want to use another Bluetooth®
device with your phone. The Blue Vision can be disconnected in the following ways:
1. Switch off the carkit.
2. Disconnect the carkit in the phone’s menu.
3. Move the phone more than 10 meters away from the carkit.
M_BlueVision_GB.pmd 04.05.2006, 17:488

GB 9
Problem
The device doesn’t charge from
the Cigarette plug. Green LED
of the Cigarette plug is off.
The device doesn’t charge from
the AC adapter. Green or Red
LED under the On/Off button is
off.
The battery is connected, but
the device doesn’t turn on when
the On/Off button is pressed for
5 seconds.
Reason
• The Cigarette
lighter jack is damaged.
• No contact between Power
adapter and Cigarette
lighter jack.
• 1.5A fuse in the
Power adapter is burned.
The AC adapter doesn’t
work.
The battery is completely
discharged.
Elimination
• Check the car’s electric
circuitry.
• Check the connection in
the cigarette plug.
• Replace the fuse.
Apply to the nearest service
center.
Connect a power adapter
and charge the battery.
TROUBLE-SHOOTING
M_BlueVision_GB.pmd 04.05.2006, 17:489

GB 10
BLUETOOTH®
The Bluetooth
®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks
by TE-Group NV is under license. Other trademarks and trade names are those of their respective
owners.
TECHNICAL DATA
Parameter Value
Charging time < 3 hours
Vehicle adapter voltage 10 – 30 V
AC power adapter voltage 100 – 240 V
Standby time 300 hours
Talk time 18 hours
CARE AND MAINTENANCE
The Blue Vision is a product of superior design and should be treated with care. The suggestions
below will help you to fulfill any warranty obligations and to enjoy this product for many years.
• Keep the carkit dry. Precipitation, humidity and all types of liquids or moistures can contain
minerals that will corrode the electronic circuitry.
• Do not use or store the carkit in hot areas. High temperatures can shorten the life of electronic
devices and warp or melt certain plastics.
• Do not store the carkit in cold areas. When it warms up (to its normal temperature), moisture can
form inside, which may damage the electronic circuitry boards.
• Do not attempt to open the carkit. Non-expert handling may damage it.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
M_BlueVision_GB.pmd 04.05.2006, 17:4810

GB 11
If the device is not working properly, take it to your nearest qualified service facility. The personnel
there will assist you and, if necessary, arrange for service.
Mr Handsfree wishes you a nice and safe trip!
GUARANTEE
Mr Handsfree is a registered trademark of TE-Group NV.
The mr Handsfree brand stands for superior product quality and outstanding customer service. That
is why mr Handsfree warrants this product against all defects in material and workmanship for a
period of three (3) years from the date of original purchase of the product.
The conditions of this limited guarantee and the extent of responsibility of mr Handsfree under this
limited guarantee are as follows:
• This guarantee is limited to the original purchaser of the product and is not transferable to any
subsequent purchaser/end user.
• During the limited guarantee period, the sole responsibility of mr Handsfree will be limited to
repair or replace, at its option, any defective parts of the product if this is needed because of
malfunction or failure under normal use and conditions. No charge shall be made to the
customer for parts and/or repair labor.
• The product must be shipped to an authorized service center in its original and complete
packaging, with transportation charges prepaid. Mr Handsfree will not assume responsibility for
any losses or damages during transportation.
• To obtain repair or replacement within the terms of this guarantee, the customer must provide
(a) a proof of purchase (e.g. dated bill of sale); (b) a written specification of the defect(s); (c) a
return address and phone number.
M_BlueVision_GB.pmd 04.05.2006, 17:4811

GB 12
• This limited guarantee does not cover and is void with respect to the following:
(a) Products which have been subjected to improper installation, unauthorized repair, improper
maintenance, unauthorized modifications or other acts which are not the fault of mr Handsfree;
(b) Products which have been subjected to misuse, abuse, neglect, improper handling and
storage, an accident or physical damage; (c) Products which have been subjected to fire, water,
excessive humidity, sand, dirt, extreme changes in temperature or other conditions which are
beyond the control of mr Handsfree; (d) Products which have been used with non-mr Handsfree
approved accessories; (e) Products which have the serial number altered, defaced or removed;
(f) Products which have been opened, altered, repaired or modified by any unauthorized
service center.
• Excluded from any guarantee are consumable items which may need replacing due to normal
wear and tear, such as batteries, ear cushions, decorative parts and other accessories.
• This limited guarantee gives you specific legal rights, and you may also have other rights which
vary from country to country.
M_BlueVision_GB.pmd 04.05.2006, 17:4812

INHOUDSTAFEL
VEILIGHEIDSINSTRUCTIES ............................................................................ 2
WAT OMVAT DE MR HANDSFREE BLUE VISION? ........................................ 2
OVERZICHT ...................................................................................................... 2
STARTPROCEDURE ......................................................................................... 3
WERKING ......................................................................................................... 6
VERHELPEN VAN PROBLEMEN ...................................................................... 9
BLUETOOTH®................................................................................................... 10
TECHNISCHE PARAMETERS ........................................................................... 10
ZORG EN ONDERHOUD ................................................................................... 10
GARANTIE ........................................................................................................ 11
M_BlueVision_NL.pmd 05.05.2006, 11:041

NL 2
VEILIGHEIDSINSTRUCTIES
1. Zorg ervoor dat de werking van de carkit geen invloed heeft op uw veiligheid.
2. Zorg ervoor dat u tijdens de installatie van de carkit het besturing- of remsysteem of een ander
systeem essentieel voor de goede werking van uw wagen niet beïnvloedt. Zorg ervoor dat het
uiteenvouwen van de airbags niet geblokkeerd wordt of onmogelijk is op eender welke manier.
3. De carkit mag enkel gebruikt worden op een werkingsvoltage van 12-24V met een negatieve
aarding. Het negeren van deze vereiste kan resulteren in schade aan het elektronisch systeem
van uw wagen.
4. Zorg ervoor dat de bevestiging aan de zonneklep uw lichaam niet kan verwonden bij een
ongeval.
WAT OMVAT DE MR HANDSFREE BLUE VISION?
Zie Illustratie I
1. Handsfree toestel met ingebouwde luidspreker
2. Lithium-Polymeer herlaadbare batterij
3. Clip voor bevestiging aan de zonneklep
4. AC adapter voor het verbinden van de Blue Vision met de netvoeding (100V – 240V)
5. Sigarenplug voor het verbinden van de Blue Vision met de stroomvoorziening van de wagen
via de sigarenaansteker (12 – 24V)
6. VELCRO-strips
OVERZICHT
Zie Illustratie II
1. Luidspreker
M_BlueVision_NL.pmd 05.05.2006, 11:042

NL 3
2. Volume Omhoog toets:
• Om het volume te verhogen
• Kantoormodus
3. Volume Omlaag toets:
• Om het volume te verlagen
• Automodus
4. Aan/Uit toets
5. Gesprektoets:
• Om oproepen te beantwoorden
• Pairing (Koppeling)
6. Verbreektoets:
• Om oproepen te beëindigen
• Om oproepen te weigeren
7. Ingebouwde microfoon
8. Oplaadcontact
9. Servicecontact
10. Batterijstatus indicatielampje
STARTPROCEDURE
De mr Handsfree Blue Vision is compatibel met de meeste Bluetooth®telefoons.
Omdat toestellen met Bluetooth®technologie communiceren via radiogolven, is het niet nodig dat
uw carkit en uw mobiele telefoon zich binnen het directe gezichtsveld bevinden. De 2 toestellen
dienen zich enkel binnen een maximum afstand van 10 meter van elkaar te bevinden. U hoeft uw
mobiele telefoon dus niet uit uw zak of tas te halen om te bellen of gebeld te worden via uw carkit.
Omdat Bluetooth®telefoons geproduceerd door verschillende fabrikanten verschillende functies
bevatten, kunnen sommige functies, beschreven in deze handleiding, anders of niet beschikbaar zijn.
M_BlueVision_NL.pmd 05.05.2006, 11:043

NL 4
BATTERIJ OPLADEN
Zie Illustratie III
De mr Handsfree Blue Vision wordt geleverd met een Lithium-Polymeer herlaadbare batterij. De
batterij werd al opgeladen, maar toch raden wij u aan de batterij nogmaals op te laden voor u de
carkit voor de eerste maal in gebruik neemt.
Plaats de batterij in het batterijcompartiment zoals aangegeven in de afbeelding. Bevestig de
clip voor de zonneklep op uw Blue Vision als u de carkit in uw wagen gaat gebruiken. Steek de
stekker van de adapter in de carkit en de AC adapter of de sigarenplug in een stopcontact. Een
rood of groen lichtje zal branden onder de Aan/Uit toets (4) wanneer het opladen begint. Als het
rode lichtje onder de Aan/Uit toets (4) brandt, dient de carkit opgeladen te worden tot het lichtje
groen wordt. Maak de kabel van de AC adapter of de sigarenplug los van de carkit.
Opmerking:
• Om een volledig opgeladen batterij en een maximale standby- en gesprekstijd te verkrijgen,
raden wij u aan de batterij één uur extra te laten opladen nadat het lichtje onder de Aan/Uit
toets groen is geworden.
• U kunt de Blue Vision gebruiken tijdens het oplaadproces.
Waarschuwing:
Het gebruik van een andere dan de bijgeleverde AC adapter kan de carkit beschadi-
gen of een defect veroorzaken. Wij raden u aan enkel originele mr Handsfree acces-
soires te gebruiken.
DE CARKIT AAN/UIT SCHAKELEN
Om de carkit aan te schakelen houdt u de Aan/Uit toets (4) ingedrukt gedurende 5 seconden tot alle
toetsen oplichten en u een melodie hoort. Het batterijstatus indicatielampje (10) begint te
M_BlueVision_NL.pmd 05.05.2006, 11:044

NL 5
knipperen. Als het lampje groen is, is de batterijcapaciteit hoog. Is het lampje rood, dan is de
capaciteit van de batterij laag.
Om de carkit uit te schakelen houdt u de Aan/Uit toets (4) ingedrukt gedurende 5 seconden tot alle
toetsen oplichten en u een melodie hoort.
PAIRING (KOPPELING)
Voor gebruik dient u de Blue Vision eenmalig met uw mobiele telefoon te koppelen (pairen).
Uw Blue Vision kan koppelingsinformatie van 2 verschillende Bluetooth®telefoons opslaan. Wan-
neer u probeert meer dan 2 toestellen te koppelen, zal het eerst gekoppelde toestel uit het geheu-
gen verwijderd worden.
Wanneer een van de gekoppelde toestellen zich binnen het bereik van 10 meter bevindt en de Blue
Vision aangeschakeld wordt, zal de Blue Vision automatisch een verbinding tot stand brengen met
de telefoon waarmee het laatst een verbinding werd gemaakt. Indien deze telefoon niet beschikbaar
is, zal de Blue Vision automatisch zoeken naar de tweede gekoppelde telefoon om een verbinding
te maken. De Blue Vision kan één actieve verbinding hebben.
Zorg ervoor dat uw telefoon en de carkit aangeschakeld zijn. Druk op de Gesprektoets (5) en houd
deze langer dan 5 seconden ingedrukt tot u een melodie hoort en de toetsen 2, 3 en 5, 6 afwisselend
knipperen. De koppelingsmodus is nu gedurende 2 minuten geactiveerd (tijdens deze 2 minuten
zullen de toetsen blijven knipperen). Ga naar het Bluetooth®menu van uw telefoon en zorg ervoor
dat de Bluetooth®-functie geactiveerd is. Ga naar het submenu waar u het zoeken naar Bluetooth®
toestellen kunt instellen en start het zoeken. De telefoon zal op zoek gaan naar alle Bluetooth®
toestellen binnen een bereik van 10 m en zal ze in een lijst weergeven op het scherm. Selecteer
de Blue Vision in de lijst. Breng de PINcode “0000” in om de Blue Vision te pairen (koppelen) en
te verbinden met uw telefoon. De toetsen van de carkit zullen stoppen met knipperen en “Blue
Vision” verschijnt in het menu waar u de Bluetooth®toestellen kan bekijken die gekoppeld zijn met
uw telefoon.
M_BlueVision_NL.pmd 05.05.2006, 11:045

NL 6
Opmerking:
U dient de Blue Vision en uw telefoon slechts eenmaal te pairen (koppelen). Elke keer dat het toestel
aangeschakeld wordt, zal het de verbinding met de mobiele telefoon trachten te herstellen.
De Bluetooth®verbinding tussen de Blue Vision en uw mobiele telefoon zal automatisch verbroken
worden wanneer een van de toestellen uitgeschakeld werd of wanneer een van de toestellen buiten
het bereik is. Om de verbinding tussen de Blue Vision en uw mobiele telefoon te herstellen, dienen
beide toestellen aangeschakeld te worden en zich binnen een afstand van 10 meter van elkaar te
bevinden. Wat volgt, is afhankelijk van het type van uw mobiele telefoon:
• Sommige telefoons zullen de verbinding automatisch herstellen.
• Bij de meeste mobiele telefoons dient u op de Gesprekstoets (5) van de Blue Vision te drukken
om de verbinding te herstellen.
• Bij andere telefoons is het nodig de verbinding te herstellen via het menu van uw mobiele
telefoon.
Opmerking:
Voor alle types van mobiele telefoons is het aangeraden om “Geaccepteerd” of “Geautoriseerd” te
kiezen voor uw Blue Vision in het Bluetooth®menu van uw mobiele telefoon. Raadpleeg de hand-
leiding van uw mobiele telefoon voor meer informatie.
WERKING
Alvorens de mr Handsfree Blue Vision te gebruiken, dient u ervoor te zorgen dat:
• De carkit gekoppeld en verbonden is met uw telefoon.
• De Bluetooth®-functie van uw telefoon geactiveerd is; raadpleeg de gebruiksaanwijzing van uw
telefoon.
• De carkit aangeschakeld is en het batterijstatus indicatielampje knippert.
M_BlueVision_NL.pmd 05.05.2006, 11:046