Getting Started
Battery Charge
The device should be fully charged before
the rst use
To charge, use the provided Magnetic-USB
power source
Connecting the USB cable: The magnetized
connectors “nd” the proper orientation
almost automatically by attracting each
other in the appropriate order
Note: DO NOT FORCE a connection to the
reader. If it does not insert smoothly, verify
that it is correctly oriented.
Charging is complete if no
bars are ashing anymore
To disconnect, pull the connector away from
the device
When charged, the battery info will show
the percentage of the battery as well as a
rough estimation of operating time
Initial Conguration
`:18:57
Cancel
Sett language
English (Default)
Deutsch / German
Francais / French
`:18:57
Cancel
Sett language
Single Read
Continuous Read
Auto
Set Language:
The default display language will be
English at rst start-up. You can change
the language by accessing
Menu>>Setup>>Display>>Set
Language. Navigating the options, you
can then select your language preference
by pressing ENTER.
`:18:57
Cancel
Battery info
57%
Expected battery life: 12h
(4h 0m Read mode)
Set Read mode:
By default, the reader is set to ‘Single
Read’- one scan click per animal.
Choosing the ‘Continuous mode’ enables
batch reading.
Note: It is possible to upload up to 29 custom
languages. Contact your local distributor for
further details.
Note: The ‘Auto’ setting starts a Single
Read on a short press of the ENTER
key and Continuous Read mode with a
long press (> one second).
