Msi Imgs45-m User manual

IMGS45-M

MS-9871 (v1.x) Industrial Computer Board

ii

PREFACE

▍

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR INTERNA-

TIONAL. We take every care in the preparation of this document, but no guarantee

is given as to the correctness of its contents. Our products are under continual

improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

MSI®is registered trademark of Micro-Star Int’l Co.,Ltd.

NVIDIA®is registered trademark of NVIDIA Corporation.

ATI®is registered trademark of ATI Technologies, Inc.

AMD®is registered trademarks of AMD Corporation.

Intel®is registered trademarks of Intel Corporation.

Windows®is registered trademarks of Microsoft Corporation.

AMI®is registered trademark of Advanced Micro Devices, Inc.

Award®is a registered trademark of Phoenix Technologies Ltd.

Sound Blaster®is registered trademark of Creative Technology Ltd.

Realtek®is registered trademark of Realtek Semiconductor Corporation.

JMicron®is registered trademark of JMicron Technology Corporation.

Netware®is a registered trademark of Novell, Inc.

Revision History

Revision Revision History Date

V1.0 First release July 2010

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s

manual, please contact your place of purchase or local distributor. Alternatively,

please try the following help resources for further guidance.

Visit the MSI website for FAQ, technical guide, BIOS updates,

driver updates, and other information:

http://www.msi.com/index.

php?func=service

Contact our technical staff at:

http://ocss.msi.com

￭

◙

iii

MS-9871

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Lay this equipment on a reliable at surface before setting it up.

The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or module.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that could damage or cause electrical

shock.

If any of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work according

to User’s Manual.

The equipment has dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAM-

AGE THE EQUIPMENT.

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況

下，使用者會被要求採取某些適當的對策。

廢電池請回收

For better environmental protection, waste batteries should be

collected separately for recycling special disposal.

￭

◯

￭

iv

PREFACE

▍

FCC-B Radio Frequency Interference Statement

This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed

to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

◯

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that

may cause undesired operation.

1)

2)

Micro-Star International

MS-9871

v

MS-9871

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must remind

you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electronic

Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,

products of “electrical and electronic equipment” cannot be discarded as municipal waste

anymore and manufacturers of covered electronic equipment will be obligated to take back

such products at the end of their useful life. MSI will comply with the product take back

requirements at the end of life of MSI-branded products that are sold into the EU. You can

return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro-

und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat

europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Eu-

ropäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurück-

zunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich

an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et an de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques

et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits

électriques et électroniques ne peuvent être déposés dans les décharges ou tout simple-

ment mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer

certains produits en n de vie. MSI prendra en compte cette exigence relative au retour des

produits en n de vie au sein de la communauté européenne. Par conséquent vous pouvez

retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005

года, изделия, относящиеся к электрическому и электронному оборудованию, не могут

рассматриваться как бытовой мусор, поэтому производители вышеперечисленного

электронного оборудования обязаны принимать его для переработки по окончании

срока службы. MSI обязуется соблюдать требования по приему продукции, проданной

под маркой MSI на территории EC, в переработку по окончании срока службы. Вы

можете вернуть эти изделия в специализированные пункты приема.

vi

PREFACE

▍

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos

electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasicados

como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores

habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a

hacerse cargo de dichos productos al termino de su período de vida. MSI estará com-

prometido con los términos de recogida de sus productos vendidos en la Unión Europea

al nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio

establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para

la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en

Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen

niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten wor-

den verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal

overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen

en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inza-

melingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini,

MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva

2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elek-

tronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači

ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog

veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao

vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na

lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako rma dbająca o ekologię, MSI przy-

pomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektryc-

znych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005,

tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane

jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbi-

erania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania

UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia.

Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

vii

MS-9871

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kara-

rnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elek-

tronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreti-

cileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.

Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin

geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına

bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků

2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické

výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se

tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-

jich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,

prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat

v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az

MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-

tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és

elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen

elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére

azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos

követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében,

azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed

Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla

categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come riuti

municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla ne del

suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che

sono stati venduti all’interno dell’Unione Europea alla ne del loro ciclo di vita. È possibile

portare i prodotti nel più vicino punto di raccolta

viii

PREFACE

▍

TABLE OF CONTENTS

Copyright Notice�� ii

Trademarks �� ii

Revision History �� ii

Technical Support �� ii

Safety Instructions �� iii

FCC-B Radio Frequency Interference Statement �� iv

WEEE (Waste Electrical and Electronic Equipment) Statement �� v

Chapter 1 Overview�� 1-1

Mainboard Specications........................................................................... 1-2

Mainboard Layout ......................................................................................... 4

Block Diagram............................................................................................ 1-6

Chapter 2 Hardware Setup�� 2-1

Quick Components Guide.......................................................................... 2-2

Memory ...................................................................................................... 2-4

Power Supply............................................................................................. 2-5

Back Panel I/O ........................................................................................... 2-6

Connector .................................................................................................. 2-8

Jumper ..................................................................................................... 2-17

Slot........................................................................................................... 2-19

Chapter 3 BIOS Setup �� 3-1

Entering Setup ........................................................................................... 3-2

The Menu Bar ............................................................................................ 3-4

Main ........................................................................................................... 3-5

Advanced ................................................................................................... 3-6

Boot.......................................................................................................... 3-12

Security .................................................................................................... 3-14

Chipset..................................................................................................... 3-15

Exit ........................................................................................................... 3-17

Chapter 4 System Resources�� 4-1

Watch Dog Timer Setting ........................................................................... 4-2

AMI POST Code ........................................................................................ 4-3

Resource List ............................................................................................. 4-7

▍

Thank you for choosing the IMGS45-M (MS-9871 v1.X), an excel-

lent industrial computer board from MSI.

Based on the innovative Intel® GS45 & ICH9M-SFF chipsets

for optimal system efciency, the IMGS45-M accommodates the

latest Intel® Core™2 Duo SL9400/ SP9300/ SU9600 (optional)/

SU9300/ SU7300 (optional)/ SU3500/ ULV722/ ULV723 proces-

sors and supports up to 2 DDR2 667/800 SO-DIMM slots to pro-

vide the maximum of 4GB memory capacity.

In the advanced-level and mid-range market segment, the

IMGS45-M provides a high-performance solution for applications

on digital signage, kiosk, gaming, and thin client.

Chapter 1

Overview

1-2

OVERVIEW

▍

Mainboard SpecificationS

CPU

Intel®Core™2 Duo processor SL9400 (6M Cache, 1.86 GHz, 1066

MHz FSB)

Intel®Core™2 Duo Processor SP9300 (6M Cache, 2.26 GHz, 1066

MHz FSB)

Intel®Core™2 Duo processor SU9300 (3M Cache, 1.20 GHz, 800 MHz

FSB)

Intel®Core™2 SOLO processor SU3500 (3M Cache, 1.40 GHz, 800

MHz FSB)

Intel®Celeron® M processor ULV722 (1M Cache, 1.20 GHz, 800 MHz

FSB)

Intel®Celeron® M processor ULV723 (1M Cache, 1.20 GHz, 800 MHz

FSB)

Intel®Core™2 Duo processor SU9600 (3M Cache, 1.60 GHz, 800 MHz

FSB) (optional)

Intel®Core™2 Duo processor SU7300 (3M Cache, 1.30 GHz, 800 MHz

FSB) (optional)

Chipset

North Bridge: Intel®GS45 chipset

South Bridge: Intel®ICH9M-SFF chipset

Super I/O controller (Model: Fintek F81865F)

Graphics controller

Internal Graphics

MXM3.0

Memory

2 DDR2 667/800 SO-DIMM slots (200 pins / 1.8V)

Supports the maximum of 4GB

LAN

Gigabit Fast Ethernet by Intel®82574L GbE controller

SATA

2 SATA 3Gb/s ports by Intel®ICH9M-SFF

Audio

HDA Codec by Realtek®ALC888

Compliant with Azalia 1.0 specs

6 watt amplier

■

1-3

MS-9871

Connectors

Back Panel I/O

1 HDMI port

1 DVI port

2 Gigabit LAN jacks

4 USB ports

2 audio jacks

Onboard Connectors/Pinheaders

1 USB 2.0 pinheader (2 ports)

1 LPC Debugging connector

4 serial port connectors (supports 10 ports)

1 SPI Flash ROM pinheader (for debugging)

1 LVDS connector

1 chassis intrusion connector

1 amplier pinheader

1 VGA port connector (1 port)

1 HDMI port connector (2 ports)

1 DVI port connector (2 ports)

Slot

2 Mini PCI-E slots

1 MXM slot

Form Factor

170mm x 170mm

Environmental

Operating Temperature: 0oC to 60oC

Storage Temperature: -20oC to 80oC

Humidity: 5% ~ 90% RH, Non-Condensing

■-

-

■-

-

■

1-4

OVERVIEW

▍

IMGS45-M (MS-9871 v1�X) Mainboard

Mainboard Layout

JRTC1

JCOMP1

JCOMP2

JSPI

JLVDS1 J1

JBAT1

JCOMP4

JAMP1

JCASE1

JCOMP3

JUSB1

JLPC1

MINI_PCIE1

COM7-10

COM3

COM2

JPW1

CPUFAN1

SYSFAN1

JFP1

COM1

SATA1

SATA2

JHDDPWR1

JVGA1

JHDMI1

JDVI1

SLOT1

JACK1

JACK2

USB1

USB2

DVI1

HDMI1

DIMM1

Front Side

1-5

MS-9871

MINI_PCIE2

DIMM2

Back Side

1-6

OVERVIEW

▍

bLock diagraM

PENRYN

Intel®

GS45

667/800/1066 FSB

LVDS

HDMI

DVI

HDMI*2/ DVI*2/ VGA*1

Level Shift

MXM 3.0 slot

DDR2 667/ 800

2 x SO-DIMM

Intel®

ICH9M-SFF

6 USB 2.0 Ports

AMI BIOS

2 Mini PCIE slots

2 SATA Ports

SPI

Realtek ALC888

Intel 82574L GbE LAN

Fintek F81865F

LPC Fintek F81216D

RS-232

RS-232/ 422/ 485

This chapter provides you with the information on

mainboard hardware congurations. Incorrect setting

of jumpers and connectors may damage your main-

board. Please pay special attention not to connect

these headers in wrong direction. DO NOT adjust any

jumper while the mainboard is powered on.

Chapter 2

Hardware Setup

2-2

HARDWARE SETUP

▍

Quick coMponentS guide

JCASE1, p.2-9

JUSB1, p.2-12

COM7_10, p.2-13

JLPC1, p.2-14

JAMP1,

p.2-10

JCOMP3, p.2-17

MINI_PCIE1,

p.2-18

JCOMP4,

p.2-17

Back Panel

I/O, p.2-6

JLVDS1, p.2-11

JCOMP1/

JCOMP2,

p.2-17

COM3_6, p.2-13

JPW1, p.2-5

JSPI1, p.2-14

SLOT1, p.2-15

JFP1, p.2-10

SATA1/2, p.2-9

JVGA1, p.2-16

Front Side

JDVI1, p.2-16

JHDMI1, p.2-15

SYSFAN1, p.2-8

CPUFAN1, p.2-8

DIMM1, p.2-4

JBAT1, p.2-3

J1, p.2-17

JCOM1/ JCOM2, p.2-13

JHDDPWR1, p.2-5

2-3

MS-9871

Back Side

MINI_PCIE2

DIMM2

DIMM2, p.2-4

MINI_PCIE2, p.2-18

2-4

HARDWARE SETUP

▍

MeMory

These DIMM slots are intended for memory modules.

Installing Memory Modules

Locate the DIMM1 SO-DIMM slot. Align the notch on the DIMM with

the key on the slot and insert the DIMM into the slot at a 45-degree

angle.

Push the DIMM gently forwards until the slot levers click and lock

the DIMM in place. Follow the same procedures to install the second

DIMM if necessary.

To uninstall the DIMM, ip the slot levers outwards and the DIMM will

be released instantly.

Important

You can barely see the golden nger if the DIMM is properly inserted in

the DIMM slot.

To enable successful system boot-up, always insert the DIMM into the

DIMM1 rst.

1.

2.

3.

•

DDR2 SO-DIMM Slot

200-pin, 1�8V

2-5

MS-9871

System Power Connector: JPW1

This connector provides power to the system and CPU.

HDD Power Connector: JHDDPWR1

This connector provides power to the hard disk drive.

Important

Power supply of 200watts (and above) is highly recommended for system

stability.

power SuppLy

13

4

2

PIN SIGNAL

1

2

3

4

GND

12V

PIN SIGNAL

1

2

3

4

5V

GND

12V

1

2-6

HARDWARE SETUP

▍

back paneL i/o

HDMI Port

The HDMI (High-Denition Multimedia Interface) is an all-digital audio/video

interface capable of transmitting uncompressed streams. HDMI supports

all TV format, including standard, enhanced, or high-denition video, plus

multi-channel digital audio on a single cable.

DVI-I Port

The DVI-I (Digital Visual Interface-Integrated) connector allows you to con-

nect an LCD monitor. It provides a high-speed digital interconnection be-

tween the computer and its display device. To connect an LCD monitor,

simply plug your monitor cable into the DVI connector, and make sure that

the other end of the cable is properly connected to your monitor (refer to

your monitor manual for more information.)

USB Port

The USB (Universal Serial Bus) port is for attaching USB devices such as

keyboard, mouse, or other USB-compatible devices.

▶

USB Port

HDMI Port DVI-I Port

LAN LAN

USB Port

Line-Out

Mic-In

MSI IMGS45-M User manual

Popular Motherboard manuals by other brands