MSI Wind Board D410 Series User manual

i
Wind Board
Wind Board
D510/ D410 Series
D510/ D410 Series
MS-7618 (v1.x) Mainboard
G52-76181X3

ii
Preface
Preface ▍
Copyright Notice
Copyright Notice
The material in this document is the intellectual property of
MICRO-STAR INTERNA-
MICRO-STAR INTERNA-
TIONAL
TIONAL. We take every care in the preparation of this document, but no guarantee is
given as to the correctness of its contents. Our products are under continual improve-
ment and we reserve the right to make changes without notice.
Trademarks
Trademarks
All trademarks are the properties of their respective owners.
MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
NVIDIA® is registered trademark of NVIDIA Corporation.
ATI® is registered trademark of ATI Technologies, Inc.
AMD® is registered trademarks of AMD Corporation.
Intel® is registered trademarks of Intel Corporation.
Windows® is registered trademarks of Microsoft Corporation.
AMI® is registered trademark of Advanced Micro Devices, Inc.
Award® is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster® is registered trademark of Creative Technology Ltd.
Realtek® is registered trademark of Realtek Semiconductor Corporation.
JMicron® is registered trademark of JMicron Technology Corporation.
Netware® is a registered trademark of Novell, Inc.
Revision History
Revision History
Revision
Revision
Revision History
Revision History
Date
Date
V1.0 For PCB 1.X, Asia version February 2010
Technical Support
Technical Support
If a problem arises with your system and no solution can be obtained from the us-
er’s manual, please contact your place of purchase or local distributor. Alternatively,
please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates,
and other information:
http://www.msi.com/index.php?func=service
http://www.msi.com/index.php?func=service
Contact our technical staff at:
http://ocss.msi.com
http://ocss.msi.com
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
◙
◙

iii
MS-7618
Safety Instructions
Safety Instructions
Always read the safety instructions carefully.
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
Lay this equipment on a reliable fl at surface before setting it up.
The openings on the enclosure are for air convection hence protects the equip-
ment from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source and adjust properly 110/220V before
connecting the equipment to the power inlet.
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
Always Unplug the Power Cord before inserting any add-on card or module.
All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that could damage or cause electrical
shock.
If any of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well or you can not get it work according to
User’s Manual.
The equipment has dropped and damaged.
The equipment has obvious sign of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,
STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAMAGE THE
EQUIPMENT.
CAUTION
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
警告使用者:
這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況
下，使用者會被要求採取某些適當的對策。
廢電池請回收
For better environmental protection, waste batteries should be
collected separately for recycling special disposal.
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
◯
◯
◯
◯
◯
◯

iv
Preface
Preface ▍
FCC-B Radio Frequency Interference Statement
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found
to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diff erent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifi cations not expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply
with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
◯
◯
◯
◯
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may
cause undesired operation.
1)
2)
Micro-Star International
MS-7618

v
MS-7618
WEEE (Waste Electrical and Electronic Equipment) Statement
WEEE (Waste Electrical and Electronic Equipment) Statement
ENGLISH
ENGLISH
To protect the global environment and as an environmentalist, MSI must
remind you that...
Under the European Union (“EU”) Directive on Waste Electrical and Elec-
tronic Equipment, Directive 2002/96/EC, which takes eff ect on August 13,
2005, products of “electrical and electronic equipment” cannot be discarded as munici-
pal waste anymore and manufacturers of covered electronic equipment will be obligated
to take back such products at the end of their useful life. MSI will comply with the prod-
uct take back requirements at the end of life of MSI-branded products that are sold into
the EU. You can return these products to local collection points.
DEUTSCH
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elek-
tro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI
hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in
die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus
zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt aus-
schliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
FRANÇAIS
En tant qu’écologiste et afi n de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement élec-
triques et électroniques, directive 2002/96/EC, prenant eff et le 13 août 2005, que les
produits électriques et électroniques ne peuvent être déposés dans les décharges ou
tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de
récupérer certains produits en fi n de vie. MSI prendra en compte cette exigence relative
au retour des produits en fi n de vie au sein de la communauté européenne. Par con-
séquent vous pouvez retourner localement ces matériels dans les points de collecte.
РУССКИЙ
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005
года, изделия, относящиеся к электрическому и электронному оборудованию,
не могут рассматриваться как бытовой мусор, поэтому производители
вышеперечисленного электронного оборудования обязаны принимать его для
переработки по окончании срока службы. MSI обязуется соблюдать требования по
приему продукции, проданной под маркой MSI на территории EC, в переработку по
окончании срока службы. Вы можете вернуть эти изделия в специализированные
пункты приема.

vi
Preface
Preface ▍
ESPAÑOL
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equi-
pos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos
clasifi cados como “eléctricos y equipos electrónicos” no pueden ser depositados en
los contenedores habituales de su municipio, los fabricantes de equipos electrónicos,
están obligados a hacerse cargo de dichos productos al termino de su período de vida.
MSI estará comprometido con los términos de recogida de sus productos vendidos en
la Unión Europea al fi nal de su periodo de vida. Usted debe depositar estos productos
en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una
empresa autorizada para la recogida de estos residuos.
NEDERLANDS
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kun-
nen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten
worden verplicht om producten retour te nemen aan het eind van hun levenscyclus.
MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI
dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op
lokale inzamelingspunten.
SRPSKI
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj
sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Di-
rektiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju
pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i
proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog
uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda
kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proiz-
vode možete vratiti na lokalnim mestima za prikupljanje.
POLSKI
POLSKI
Aby chronić nasze środowisko naturalne oraz jako fi rma dbająca o ekologię, MSI przy-
pomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektry-
cznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia
2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być trak-
towane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani
do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni
wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wy-
cofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach
zbiorczych.

vii
MS-7618
TÜRKÇE
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC
Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli
ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların
üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü
olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI
ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama
noktalarına bırakabilirsiniz.
ČESKY
ČESKY
Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické
výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se
tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-
jich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,
prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat
v místních sběrnách.
MAGYAR
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve
az MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-
tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos
és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az
ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavé-
telére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapc-
solatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek
esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre
viheti.
ITALIANO
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici
ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti
alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come
rifi uti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto
alla fi ne del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti
marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fi ne del loro
ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta

viii
Preface
Preface ▍
TABLE OF CONTENTS
TABLE OF CONTENTS
Copyright Notice
Copyright Notice
...........................................................................................
...........................................................................................
i
i
i
i
Trademarks
Trademarks
..................................................................................................
..................................................................................................
i
i
i
i
Revision History
Revision History
............................................................................................
............................................................................................
i
i
i
i
Technical Support
Technical Support
.........................................................................................
.........................................................................................
i
i
i
i
Safety Instructions
Safety Instructions
.......................................................................................
.......................................................................................
ii
ii
i
i
FCC-B Radio Frequency Interference Statement
FCC-B Radio Frequency Interference Statement
........................................
........................................
i
i
v
v
WEEE (Waste Electrical and Electronic Equipment) Statement
WEEE (Waste Electrical and Electronic Equipment) Statement
..................
..................
v
v
English
English
....................................................................................................
....................................................................................................
En-
En-
1
1
Mainboard Specifi cations ................................................................................En-2
Quick Components Guide ...............................................................................En-4
Memory ...........................................................................................................En-5
Power Supply ..................................................................................................En-7
Back Panel ......................................................................................................En-8
Connectors ......................................................................................................En-9
Jumper ..........................................................................................................En-14
Slots ..............................................................................................................En-15
BIOS Setup ...................................................................................................En-16
Software Information .....................................................................................En-24
한국어
한국어
......................................................................................................
......................................................................................................
Kr-
Kr-
1
1
메인보드 사양 ...................................................................................................Kr-2
빠른 부품 설명서 ..............................................................................................Kr-4
메모리 ..............................................................................................................Kr-5
전원 공급 장치 ..................................................................................................Kr-7
후면 패널 ..........................................................................................................Kr-8
커넥터 ..............................................................................................................Kr-9
점퍼 ................................................................................................................Kr-14
슬롯 ................................................................................................................Kr-15
BIOS 설정 ......................................................................................................Kr-16
소프트웨어 정보 .............................................................................................Kr-24
日本語
日本語
.....................................................................................................
.....................................................................................................
Jp-
Jp-
1
1
マザーボードの仕様 ........................................................................................ Jp-2
クイックコンポーネントガイド ...................................................................... Jp-4
メモリ ............................................................................................................. Jp-5
電源 ................................................................................................................. Jp-7
I/Oパネル ......................................................................................................... Jp-8
コネクター ...................................................................................................... Jp-9
▍

ix
MS-7618
ジャンパ ......................................................................................................... Jp-14
スロット ......................................................................................................... Jp-15
BIOSの設定 .................................................................................................... Jp-16
ソフトウェアの情報 ....................................................................................... Jp-24
繁體中文
繁體中文
..................................................................................................
..................................................................................................
Tc-
Tc-
1
1
主機板規格 ....................................................................................................... Tc-2
快速零組件指南 ................................................................................................ Tc-4
記憶體 .............................................................................................................. Tc-5
電源供應器 ....................................................................................................... Tc-7
背板 .................................................................................................................. Tc-8
接頭 .................................................................................................................. Tc-9
跳線 ................................................................................................................ Tc-14
插槽 ................................................................................................................ Tc-15
BIOS 設定 ...................................................................................................... Tc-16
軟體訊息 ......................................................................................................... Tc-24
简体中文
简体中文
..................................................................................................
..................................................................................................
Sc-
Sc-
1
1
主板规格 ...........................................................................................................Sc-2
组件快速指南 ....................................................................................................Sc-4
内存 ..................................................................................................................Sc-5
电源适配器 .......................................................................................................Sc-7
后置面板 ...........................................................................................................Sc-8
接口 ..................................................................................................................Sc-9
跳线 ................................................................................................................Sc-14
插槽 ................................................................................................................Sc-15
BIOS 设置 ......................................................................................................Sc-16
软件信息 .........................................................................................................Sc-24

Wind Board
Wind Board
D510/ D410
D510/ D410
Series
Series
English
English
Asia version

En-2
MS-7618 Mainboard
MS-7618 Mainboard ▍
MAINBOARD SPECIFICATIONS
MAINBOARD SPECIFICATIONS
Processor Support
Processor Support
Support Intel® Atom CPU D510/ D410
Base Clock Extemal clock frequency
Base Clock Extemal clock frequency
100 MHZ
Chipset
Chipset
Intel® NM10 chipset
Memory Support
Memory Support
DDR2 800 SDRAM (4GB Max)
2 DDR2 DIMMs (240pin / 1.8V), single channel
*(For more information on compatible components, please visit
http://www.msi.com/index.php?func=testreport)
LAN
LAN
Supports Realtek® RTL8103EL 10/100 Mb/s
Supports Realtek® RTL8111DL 10/100/1000 Mb/s (optional)
Supports ACPI Power Management
Audio
Audio
Chip integrated by Realtek® ALC888S
Supports 6-channels audio out
SATA
SATA
2 SATA 3 Gb/s ports by Intel® NM10
Connectors
Connectors
Back panel
1 PS/2 mouse port
1 PS/2 keyboard port
1 Serial port
1 VGA port
4 USB 2.0 Ports
1 RJ-45 LAN jack
3 fl exible audio jacks
On-Board Connectors
2 USB 2.0 connectors
1 Parallel port connector
1 Front Panel Audio connector
1 S/PDIF-Out connector
1 Chassis Intrusion connector
1 TPM connector
■
■
■
■
■
■
■
■
■
■
■
■‑
‑
‑
‑
‑
‑
‑
■‑
‑
‑
‑
‑
‑

En-3
English
Slots
Slots
1 PCI slot
Support 3.3V/ 5V PCI bus Interface
Form Factor
Form Factor
Mini-ITX (17.0cm X 17.0cm)
Mounting
Mounting
4 mounting holes
If you need to purchase accessories and request the part numbers, you could search
the product web page and fi nd details on our web address below http://www.msi.com/
index.php
■
■
■
■

En-4
MS-7618 Mainboard
MS-7618 Mainboard ▍
QUICK COMPONENTS GUIDE
QUICK COMPONENTS GUIDE
Back Panel
Back Panel,
En-8
DDR2
DDR2, En-5
JCI1
JCI1, En-9
JPWR1
JPWR1, En-7
JTPM1
JTPM1, En-12
SATA
SATA, En-9
SYSFAN1
SYSFAN1, En-10
JFP1
JFP1, En-10
JUSB1~2
JUSB1~2, En-11
PCI
PCI, En-15
JPWR2
JPWR2, En-7
JBAT1
JBAT1, En-14
SYSFAN2
SYSFAN2,
En-10
JLPT1
JLPT1, En-12
JAUD1
JAUD1, En-11
JSP1
JSP1, En-13

En-5
English
MEMORY
MEMORY
These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit
http://www.msi.com/index.php?func=testreport
DDR2
DDR2
240-pin, 1.8V
240-pin, 1.8V
64x2=128 pin
64x2=128 pin
56x2=112 pin
56x2=112 pin
Memory Population Rule
Memory Population Rule
Please refer to the following illustrations for memory population rules.
1
1 DIMM1
DIMM2
2
2 DIMM1
DIMM2
Important
Important
DDR2 memory modules are not interchangeable with DDR and the DDR2 standard
is not backwards compatible. You should always install DDR2 memory modules in
the DDR2 DIMM slots.
To enable successful system boot-up, always insert the memory modules into the
DIMM1 fi rst
DIMM1 fi rst.
Due to the chipset resource deployment, the system density will only be detected up
to 3+GB (not full 4GB) when each DIMM is installed with a 2GB memory module.
•
•
•
Installed
Empty

En-6
MS-7618 Mainboard
MS-7618 Mainboard ▍
Installing Memory Modules
Installing Memory Modules
The memory module has only one notch on the center and will only fi t in the right
orientation.
Insert the memory module vertically into the DIMM slot. Then push it in until the
golden fi nger on the memory module is deeply inserted in the DIMM slot. The plastic
clip at each side of the DIMM slot will automatically close when the memory module
is properly seated.
Manually check if the memory module has been locked in place by the DIMM slot
clips at the sides.
Notch
Volt
Important
Important
You can barely see the golden fi nger if the memory module is properly inserted in the
DIMM slot.
1.
2.
3.

En-7
English
POWER SUPPLY
POWER SUPPLY
ATX 24-pin Power Connector: JPWR1
ATX 24-pin Power Connector: JPWR1
This connector allows you to connect an ATX 24-pin power supply. To connect the ATX
24-pin power supply, make sure the plug of the power supply is inserted in the proper
orientation and the pins are aligned. Then push down the power supply fi rmly into the
connector.
You may use the 20-pin ATX power supply as you like. If you’d like to use the 20-pin
ATX power supply, please plug your power supply along with pin 1 & pin 13.
13.+3.3
V
1.+3.3V
14.-12V
2.+3.3V
15.Ground
3.Ground
16.PS-ON#
4.+5V 17.Ground
5.Ground
18.Ground
6.+5V
19.Ground
7.Ground
22.+5V
10.+12V
20.Res
8.PWR OK
23.+5V
11.+12V
21.+5V
9.5VSB
24.Ground
1
2.+3.3V
ATX 4-pin Power Connector: JPWR2
ATX 4-pin Power Connector: JPWR2
This connector is used to provide the power output to the CPU.
4.+12
V
2.Ground
3.+12V
1
.Ground
Important
Important
Make sure that all the connectors are connected to proper ATX power supplies to
ensure stable operation of the mainboard.
Power supply of 350 watts (and above) is highly recommended for system stability.
•
•

En-8
MS-7618 Mainboard
MS-7618 Mainboard ▍
BACK PANEL
BACK PANEL
Mouse/Keyboard
Mouse/Keyboard
The standard PS/2® mouse/keyboard DIN connector is for a PS/2® mouse/keyboard.
Serial Port
Serial Port
The serial port is a 16550A high speed communications port that sends/ receives 16
bytes FIFOs. You can attach a serial mouse or other serial devices directly to the con-
nector.
VGA Port
VGA Port
The DB15-pin female connector is provided for monitor.
USB Port
USB Port
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,
mouse, or other USB-compatible devices.
LAN
LAN
The standard RJ-45 LAN jack is for connection to
the Local Area Network (LAN). You can connect a
network cable to it.
LED
LED
Color
Color
LED State
LED State
Condition
Condition
Left Yellow Off LAN link is not established.
On(Steady state) LAN link is established.
On(brighter & pulsing) The computer is communicating with another computer on the LAN.
Right Green Off 10 Mbits/sec data rate is selected.
On 100 Mbits/sec data rate is selected.
Orange On 1000 Mbits/sec data rate is selected.
Audio Ports
Audio Ports
These audio connectors are used for audio devices. It is easy to diff erentiate between
audio eff ects according to the color of audio jacks.
Line-In (Blue) - Line In is used for external CD player, tapeplayer or other audio
devices.
Line-Out (Green) - Line Out is a connector for speakers or headphones.
Mic (Pink) - Mic is a connector for microphones.
▶
▶
▶
▶
▶
▶
■
■
■
Mouse
Mouse
Line-In
Line-In
USB Port
USB Port
Yellow Green/ Orange
Keyboard
Keyboard
VGA Port
VGA Port
LAN
LAN
USB Port
USB Port
Serial Port
Serial Port
Line-Out
Line-Out
Mic
Mic

En-9
English
CONNECTORS
CONNECTORS
Serial ATA Connector: SATA1~2
Serial ATA Connector: SATA1~2
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
FloppyD
MS
I
FloppyD
MS
I
FloppyD
MSI
FloppyD
MSI
Kd
klkdkfkkkfd
kkl
dd
fkkksd
dfd
df
as
dka
df-d
dfdd
a
dd
fd
fddd
ddfa
df
a
dkja
sjd
kd
fd
fasd
ddffa
sd
fd
dd
ddd
d
fdasfda
sa
s
df
as
d
as
d
a
sd
dd
ddd
dfas
asdfs
dffs
df
adfffas
dfffdf
Kd
klkdkfkkkfd
kkl
dd
fkkksd
dfd
df
as
dka
df-d
dfdd
a
dd
fd
fddd
ddfa
df
a
dkja
sjd
kd
fd
fasd
ddffa
sd
fd
dd
ddd
d
fdasfda
sa
s
df
as
d
as
d
a
sd
dd
ddd
dfas
asdfs
dffs
df
adfffas
dfffdf
FloppyD
MS
I
FloppyD
MS
I
Kdklkd
kfkkkfdkkl
ddfkkks
d
dfdd
f
a
s
dka
d
f-d
dfdd
a
ddfdfd
ddd
dfad
f
ad
kjas
jdkdfdfa
sd
d
dffas
dfdd
dd
dd
dfd
as
fdasa
sd
f
as
d
a
sd
as
dd
ddd
dd
fa
s
as
dfsdffsd
f
a
dfffasdfffdf
Kdklkd
kfkkkfdkkl
ddfkkks
d
dfdd
f
a
s
dka
d
f-d
dfdd
a
ddfdfd
ddd
dfad
f
ad
kjas
jdkdfdfa
sd
d
dffas
dfdd
dd
dd
dfd
as
fdasa
sd
f
as
d
a
sd
as
dd
ddd
dd
fa
s
as
dfsdffsd
f
a
dfffasdfffdf
Important
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
Chassis Intrusion Connector: JCI1
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
1.CINTR
U
2.Groun
d

En-10
MS-7618 Mainboard
MS-7618 Mainboard ▍
Fan Power Connectors: SYSFAN1~2
Fan Power Connectors: SYSFAN1~2
The fan power connectors support system cooling fan with +12V. When connecting the
wire to the connectors, always note that the red wire is the positive and should be con-
nected to the +12V; the black wire is Ground and should be connected to GND. If the
mainboard has a System Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
1.Ground
2.+12V
3.Senso
r
Front Panel Connectors: JFP1
Front Panel Connectors: JFP1
The connector is for electrical connection to the front panel switches and LEDs. The
JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide.
1.+
3.-
10.NoPin
5.- ResetSwitc
h
HDD LE
D
Power Switch
Power LED
7.+
9.Reserved
8.-
6.+
4.-
2.+