MTB MTB-CB002 User manual

Multi-purpose QUAD control box
Free Input voltage (DC 10V ~ DC 40V)
NTSC / PAL Compatible
4 camera inputs
1 AV input
1 AV output
Shutter camera compatible (CA1~CA4)
Various Display mode (Single / Split / Triple / Quad)
Auto Picture function (5 trigger inputs)
Trigger Output (12V DC, max. 100mA)
Auto Scan function
Simple OSD
FEATURES
2. Remote Control
①POWER button
◦Turn on or off the control box.
②MENU button
◦Move down the cursor in the main menu.
③▲, ▼button
◦Move up and down the cursor in the sub menu.
④◀(VOL) , ▶(VOL) button
◦Access to the volume control menu directly when OSD disappeared.
◦Increase or decrease selected value when OSD appeared.
⑤CHANNEL button
◦Select target image in the sequential routine.
(CAM1 → CMA2 → CAM3 → CAM4 → AUX → SPLIT2 → SPLIT3
→ SPLIT4 → CAM1 → …)
⑥CA1, CA2, CA3, CA4/AV button
◦Select target camera or AV input directly.
** LED indicate on the control box
- Green color : Power on by pressing POWER button
- Red color : Power off by pressing POWER button
Multi Quad Control Box
MTB-CB002
1. Contents
4. Specifications
3. Connection
CA1
CA2
CA3
CA4
Power / Trigger Input
Video output
Audio output
Video input
Audio input
Sensor signal input
2 3
1 4
5
1. DC12V Power
2. Audio In
3. DC 12V (Shutter)
4. Video In
5. Ground
BROWN
TRIGGER 5 (DC 12/24V)
YELLOW
TRIGGER4 (DC 12/24V)
BLUE
TRIGGER3 (DC 12/24V)
WHITE
TRIGGER2 (DC 12/24V)
GREEN
TRIGGER1 DC 12/24V)
ORANGE
Trigger Output (12V DC, max. 100mA)
BLACK
GROUND
RED
POWERIN (DC 10~40V)
< Power/Trigger Wire >< Camera Input (CA1~CA4) >
◊4 Camera Inputs : Mini DIN4, 1Vp-p 75Ω
◊1 A/V Input : - Video : RCA, CVBS, 1Vp-p, 75Ω
- Audio : RCA, 150mVRMS
◊1 AV output : - Video : RCA, CVBS, 1Vp-p, 75Ω
- Audio : RCA, 150mVRMS
Connector
NTSC / PAL Compatible
Video System
Max. 25watt
Power Consumption
DC 10V ~ 40V InputPower Input
152(W) x 102(H) x 25(D)mm
Dimension
360gWeight
①⑤
④
③
②
⑥
ㆍCABLE REINFORCEMENT BRACKET
Fix the bracket jack with provided screws
after connecting the cameras.
Owner’s Manual
ITEM Q’ty
QUAD CONTROL BOX 1
POWER CABLE 1
AV CABLE 1
REMOTE CONTROLLER 1
IR FOR REMOTE CONTROLLER 1
CABLE REINFORCEMENT BRACKET 1
SCREW KIT 1

* Selection SPLIT TYPE
Differenttypeof split display can be selected.
1) Select [ TYPE ] →Press [ ◄, ►button ] →Select [ DEFAULT ] →Press [▲,▼button ]
→Select [ TYPE EDIT ] → Press [ ◄, ►button ] → Show windows the follows below
2) Press [▲,▼button ] →Press [ ◄, ►button] thensub window will be changed.
3) In this window,
- ▲,▼button : moveup and down the cursor
- ◄(VOL),►(VOL) button : Select target split type
- MENU button : Exit this window and return to previouswindow
* Edition SPLIT TYPE
Differenttype of split display can be edited.
1) Select [ TYPE ] → Press [ ◄, ►button ] → Select [ CUSTOM ] → Press [▲,▼button ]
→ Select [ TYPE EDIT ] → Press [ ◄, ►button ] → Show windows the follows below
2) Press [▲,▼button ] →Press [ ◄, ►button ] then sub window will be changed.
3) In this window,
- ▲,▼button : moveup and down the cursor
- ◄(VOL),►(VOL) button : Adjust scale of selected menu
- MENU button : Exit this window and return to previous window
HORIZONTAL POSITION
VERTICAL POSITION
IMAGE SIZE
CHANNEL : CAM1
⑤AUTO SCAN menu
[ ON / OFF ] COLOR
CAMERA
TRIGGER
SPLIT
AUTO SCAN
ADVANCED
QUIT
AUTO SCAN
AUTO
1) Press MENU button until the cursor on the main window highlighted at AUTO SCAN
2) Select on or off the auto scan function by pressing ◄(VOL), ►(VOL) button
* When select ON
1) Sub window will be changed.
2) In this window,
- ▲,▼button : move up and down the cursor
- ◄(VOL), ►(VOL) button : Adjust scan period from
0sec to 20 sec or select skip
[ ON ]
CAM1 [ 0 ~ 20SEC ]
CAM2 [ 0 ~ 20SEC ]
CAM3 [ 0 ~ 20SEC ]
CAM4 [ 0 ~ 20SEC ]
AUX [ 0 ~ 20SEC ]
SPLIT1 [ 0 ~ 20SEC ]
SPLIT2 [ 0 ~ 20SEC ]
SPLIT3 [ 0 ~ 20SEC ]
AUTO
1) To close OSD window, press ◄(VOL) or ►(VOL) button when selected QUIT menu.
2) OSD will automatically disappear in 10 seconds when nothing pressed.
⑥ADVANCED menu
[ AUTO / ON / OFF ]
SYSTEM [ AUTO / PAL / NTSC ]
ORIENTATION [ NORMAL / MIRROR / FLIP / ROTATE ]
RESET [ NO / YES ]
F/W : xx.xxxx_xxxxxx
COLOR
CAMERA
TRIGGER
SPLIT
AUTO SCAN
ADVANCED
QUIT
ADVANCED
AUTO POWER
1) Press MENU button until the cursor on the main window highlighted at ADVANCED
2) Select target menu on the sub window by pressing ▲, ▼button
3) Adjust target value by pressing ◄(VOL), ►(VOL) button
⑦QUIT menu
[NO ] COLOR
CAMERA
TRIGGER
SPLIT
AUTO SCAN
ADVANCED
QUIT
QUIT
QUIT
④SPLIT menu
[ SPLIT1 / SPLIT2 / SPLIT3 ]
SOURCE1 [ CAM1 / CAM2 / CAM3 / CAM4/ AUX / NONE ]
SOURCE2 [ CAM1 / CAM2 / CAM3 / CAM4/ AUX / NONE ]
SOURCE3 [ CAM1 / CAM2 / CAM3 / CAM4/ AUX / NONE ]
SOURCE4 [ CAM1 / CAM2 / CAM3 / CAM4/ AUX / NONE ]
AUDIO [CAM1 / CAM2 / CAM3/ CAM4 / AUX / NONE ]
TYPE [ DEFAULT / CUSTOM ]
TYPE EDIT [ SELECT / EDIT ]
COLOR
CAMERA
TRIGGER
SPLIT
AUTO SCAN
ADVANCED
QUIT
SPLIT
SPLIT
1) Press MENU button until the cursor on the main window highlighted at SPLIT
2) Select target menu on the sub window by pressing ▲, ▼button
3) Adjust target value by pressing ◄(VOL), ►(VOL) button
②CAMERA menu
[ CAM1 / CAM2 / CAM3 / CAM4 / AUX ]
MIRROR [ NORMAL / MIRROR ]
FLIP [ NORMAL / FLIP ]
NAME [ CAM1 ]
SORT [ NORMAL/ SHUTTER ]
AUDIO [ ON / OFF ]
VOLUME [ 0.00 ~ 2.75X ]
COLOR
CAMERA
TRIGGER
SPLIT
AUTO SCAN
ADVANCED
QUIT
CAMERA
CAMERA
1) Press MENU button until the cursor on the main window highlighted at CAMERA
2) Select target menu on the sub window by pressing ▲, ▼button
3) Adjust target value by pressing ◄(VOL), ►(VOL) button
AM1
[ ] [ 4 ] [ C ] [ K ] [ S ]
[ _ ] [ 5 ] [ D ] [ L ] [ T ]
[ + ] [ 6 ] [ E ] [ M ] [ U ]
[ - ] [ 7 ] [ F ] [ N ] [ V ]
[ 0 ] [ 8 ] [ G ] [ O ] [ W ]
[ 1 ] [ 9 ] [ H ] [ P ] [ X ]
[ 2 ] [ A ] [ I ] [ Q ] [ Y ]
[ 3 ] [ B ] [ J ] [ R ] [ Z ]
* NAME typing method
1) Select NAME on the sub window by pressing ▲, ▼
button
2) Press ◄(VOL),►(VOL) button then sub window
will be changed.
3) In this window,
- ▲,▼button : moveup and down the cursor
- ◄(VOL),►(VOL) button : Select target character
and move to next space
- MENU button : Exitthis window and returnto
previouswindow
C
[ C ]
③TRIGGER menu
[ TRIGGER1/ TRIGGER2/ TRIGGER3 /
TRIGGER4 / TRIGGER5 ]
SOURCE [ CAM1 / CAM2 / CAM3 / CAM4 / AUX /
SPLIT1 / SPLIT2 / SPLIT3 / SKIP ]
DELAY [ 0 ~ 20 SEC ]
SCALE [ ON / OFF]
SET SCALE
COLOR
CAMERA
TRIGGER
SPLIT
AUTO SCAN
ADVANCED
QUIT
TRIGGER
TRIGGER
1) Press MENU button until the cursor on the main window highlighted at TRIGGER
2) Select target menu on the sub window by pressing ▲, ▼button
3) Adjust target value by pressing ◄(VOL), ►(VOL) button
** DELAY period : 0~20 sec (in order to bridge DC voltage pulse signal from
direction lights)
BOTTOMWIDTH
HEIGHT
HORIZONTALPOSITION
VERTICAL POSITION
BAR HORIZONTALPOSITION
BAR VERTICAL POSITION
SCALE 3
SCALE 2
SCALE1
TOP WIDTH
* Adjust SET SCALE
1) Select SET SCALE on the sub
window by pressing ▲, ▼
button
2) Press ◄(VOL), ►(VOL) button then
OSD window will be
changed.
3) In this window,
- ▲,▼button : move up and down the
cursor to select target
menu
- ◄(VOL), ►(VOL) button : Adjust
scale of selected menu
- MENU button : Exit this window and
return to previous window
4.0 4.0
2.0 2.0
1.0 1.0
①COLOR menu
BRIGHTNESS [ 0 ~ 100 ]
CONTRAST [ 0 ~ 100 ]
COLOR [ 0 ~ 100 ]
TINT [ 0 ~ 100 ]
COLOR
CAMERA
TRIGGER
SPLIT
AUTO SCAN
ADVANCED
QUIT
COLOR BRIGHTNESS
1) Press MENU button
2) Select target menu on sub window by pressing ▲, ▼button
3) Adjust target value by pressing ◄(VOL), ►(VOL) button
•Main menu window
- Select or move
by press MENU
button
•Sub menu window
- Select or move by press ▲or ▼button.
- Adjust value by press ◄(VOL) or ►(VOL) button
< OSD setup >
5. OSD CONTROL
[ ON ]
[ OFF ]
In case < SPLIT1 >
[ ON ]
[ OFF ]
In case < SPLIT2 >
[ OFF ]
[ OFF ]
[ OFF ] [ OFF ]
[ ON ]
[ OFF ]
In case < SPLIT3 >
[ OFF ]
[ OFF ]
•CHANNEL : CAM1~4
- Select the camera for SPLIT TYPE edition.
•HORIZONTAL POSITION
- Adjust the horizontal position to the left and right directions.
•VERTICAL POSITION
- Adjust the vertical position up or down direction.
•IMAGE SIZE
- Adjust display size.
(* Size can be adjusted at 4:3 ratio.)