MultiOne 6 Series User manual

INSTRUCTION
MANUAL
6 SERIES
SELF-MOVING COMPACT WHEEL LOADER,
ARTICULATED FRAME, EQUIPPED WITH
MULTIPURPOSE QUICK COUPLER
MultiOne s.r.l -Translation of the original instructions - COD. CM150032EN - r.05 - EN

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
1/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
1 DOCUMENT IDENTIFICATION................................. 3
1.1 Designation .................................................................. 3
1.2 Identification ................................................................. 3
1.3 Glossary ....................................................................... 4
1.4 Abbreviations................................................................ 4
1.5 Consultation notes........................................................ 5
1.6 Receivers of the document........................................... 6
1.6.1 Authorized operators................................................. 6
1.7 Warranty....................................................................... 6
2 MACHINE IDENTIFICATION..................................... 8
2.1 Copy of CE accordance statement............................... 8
2.2 Designation .................................................................. 9
3 IMPORTANT INFORMATION ABOUT SAFETY....... 9
3.1 General instructions ..................................................... 9
3.2 Residual risks............................................................... 9
3.3 Transport and lifting ................................................... 10
3.4 Maintenance................................................................11
4 DESCRIPTION OF THE MACHINE ........................ 12
4.1 Main parts and their functions .................................... 12
4.2 Seats taken by authorised operators.......................... 14
4.3 Control devices........................................................... 16
4.3.1 Button commands ................................................... 18
4.3.2 Multifunction device ................................................ 20
4.3.3 Joystick ................................................................... 22
4.3.4 Cabin commands .................................................... 23
4.4 Shelters and protection devices ................................. 24
4.5 Intended use............................................................... 25
4.5.1 Use limits and technical data .................................. 25
4.5.2 Dimensions ............................................................. 26
4.5.3 Load diagram .......................................................... 27
4.6 Hydraulic flow/engine speed diagram ........................ 28
4.7 Reasonable foreseeable misuse................................ 29
4.8 Safety signs................................................................ 30
4.9 Emissions................................................................... 34
4.9.1 Sound level ............................................................. 34
4.9.2 Vibrations................................................................ 34
4.10 Personal protective equipment................................... 34
5 TRANSPORT AND HANDLING.............................. 35
5.1 Transport .................................................................... 35
5.2 Handling ..................................................................... 35
5.2.1 Installation procedure of the steering lock bracket.. 36
5.3 Storage....................................................................... 37
6 ASSEMBLY AND INSTALLATION.......................... 37
6.1 Assembly.................................................................... 37
6.2 Options....................................................................... 37
6.3 Attachments .............................................................. 38
6.3.1 Available attachments............................................. 38
6.3.2 Assembly of the attachments.................................. 38
6.4 Backweights ............................................................... 38
7 PRE-START INSPECTION ..................................... 39
7.1 Connecting / disconnecting battery ............................ 39
8 OPERATION............................................................ 40
8.1 Adjustments................................................................ 40
8.1.1 Adjustment of the driving seat................................. 40
8.2 Checks before ignition................................................ 41
8.3 Normal operations...................................................... 41
8.3.1 Procedure to get on to the operating position of the
machine .................................................................. 41
8.3.2 Starting up............................................................... 42
8.3.3 Handling.................................................................. 43
8.3.4 Assembly of the attachment.................................... 45
8.3.5 Disassembly of the attachment .............................. 48
8.3.6 Turning off the machine .......................................... 49
8.3.7 Parking brake.......................................................... 49
8.3.8 Refuelling................................................................ 50
8.4 Functions/exceptional situations ................................ 51
8.4.1 Instability of the machine ........................................ 51
8.4.2 Overpressure in the hydraulic circuit....................... 51
8.4.3 Loss of control......................................................... 51
8.4.4 Emergency exit of the cabin.................................... 51
8.4.5 Block of the machine with the lift arm raised........... 51
8.4.6 Towing the machine on ........................................... 52
8.4.7 Jump start ............................................................... 53
9 MAINTENANCE ...................................................... 54
9.1 General warnings ....................................................... 54
9.2 Safety status of the machine...................................... 54
9.3 Installation safety block on the lifting arm................... 54
9.4 Opening engine cover ............................................... 55
9.5 Maintenance light reset .............................................. 55
9.6 Ordinary maintenance table ....................................... 56
9.7 Scheduled maintenance............................................. 57
9.8 Machine maintenance ................................................ 58
INDEX
INDEX

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
2/76
INDEX
9.8.1 Cleaning of the machine ......................................... 58
9.8.2 Check tyres pressure .............................................. 58
9.8.3 Check structural integrity and tightening bolts ........ 58
9.8.4 Battery check .......................................................... 58
9.8.5 Hydraulic oil level .................................................... 59
9.8.6 Hydraulic oil filter change........................................ 60
9.8.7 Hydraulic oil change................................................ 60
9.8.8 Adjust the boom guide shoes.................................. 61
9.8.9 Fuses ...................................................................... 62
9.8.10 Greasing points ..................................................... 62
9.8.11 Heating system air filter replacing (optional).......... 64
9.9 Engine maintenance................................................... 65
9.9.1 Check engine oil level ............................................. 65
9.9.2 Check coolant level................................................. 65
9.9.3 Check separator filter.............................................. 66
9.9.4 Air filter check ......................................................... 67
9.10 Troubleshooting.......................................................... 68
10 SPARE PARTS........................................................ 69
10.1 Filter code................................................................... 69
11 ANNEXES ............................................................... 70
11.1 Road light kit (option) ................................................. 70
11.2 Parallelogram ............................................................. 70
11.3 Cab (option)................................................................ 70
11.4 Backweights (option) .................................................. 71
11.5 Additional hydraulic outlets (option) ........................... 71
11.6 Tyres pressure............................................................ 72
11.7 Throttle limiter............................................................. 73
11.8 Warranty terms........................................................... 74
11.8.1 General rules ......................................................... 74
11.8.2 Scheduled maintenance ........................................ 74
11.8.3 Exclusion of warranty............................................. 74
11.8.4 Warranty expiration................................................ 74
11.8.1 Notes ..................................................................... 74
11.9 Slope guide ................................................................ 76

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
3/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
WARNING
BEFORE OPERATING THE MACHINE, THE OPERATOR MUST READ AND UNDERSTAND ALL INSTRUCTIONS OF THIS MANUAL.
THE MANUAL MUST BE CAREFULLY KEPT INSIDE THE MACHINE TILL ITS DISMISSION.
Presentation
Dear customer,
We will, first of all, thank you for the confidence you gave us purchasing your new “Self-moving Compact wheel loader, articulated
frame, equipped with multipurpose quick coupler, MULTIONE 6 Series”.
We are sure your expectations will be satisfied since the technological level reached by our products and thank to a continuous
engagement that stimulates us daily to increase to be able to face the continuous, technological, productive and trade transformations.
We are sure we can also face any your future working requirement, we are pleased to remain at your disposal and offer you all our
experience and knowledge for the best solution of any your query.
1 DOCUMENT IDENTIFICATION
1.1 Designation
The following document is called “operating manual” (later on manual). It has been edited in accordance with the essential
requirements of security 1.7.4 of the Enclosure l of the machine Directive 2006/42/CE.
ATTENTION
THIS MANUAL MUST BE ALWAYS AT AUTHORIZED OPERATORS’ DISPOSAL AND BE NEARBY THE MACHINE WELL KEPT AND
PRESERVED.
THIS MANUAL MUST BE COMPULSORILY DELIVERED TOGETHER WITH THE MACHINE IN CASE IT WILL BE TRANSFERRED TO
ANOTHER USER.
WE ADVISE YOU TO COPY OUT THE IDENTIFICATION DATA OF THE DOCUMENT: CODE, ISSUE AND REVISION (SEE COVER) TO
REQUEST AGAIN COPY OF THE MANUAL TO THE MANUFACTURER IN CASE OF LOSS OR DETERIORATION OF IT.
THIS MANUAL REFLECTS THE STATE OF THE TECHNOLOGY AND KNOW-HOW AT THE MOMENT OF THE MACHINE MARKETING
AND IT CANNOT BE CONSIDERED INADEGUATE ONLY BECAUSE, ACCORDING TO NEW EXPERIENCES, CAN BE UPDATED LATER.
1.2 Identification
The manual is identified though the following data reported in the table on the cover and in annotation:
• Abbreviation of the language.
• Original instructions or translation of them.
• Symbol ISO 7000.
• Identifying code (ID).
• Issue.
• Revision (or revisione date).
TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Code Issue Revision
CM150032EN 16.06.15 05 (11.07.18)
This manual is the “Translation of original instructions” identified as follows:
ISTRUZIONI ORIGINALI
Codice Emissione Revisione
CM150032 31.03.15 05 (11.07.18)
DOCUMENT IDENTIFICATION -1

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
4/76
1.3 Glossary
Term Definition
Basic machine
(later machine)
Self-moving Compact wheel loader, articulated frame, equipped with multipurpose quick coupler, planned
to carry out various functions using interchangeable attachments.
Original interchangeable
attachments(later attachment)
According to the article 2, b) of the Machine Directive 2006/42/CE it is a machine specified as: device
that after the starting up of a machine or of a tractor, is assembled with the machine or with the tractor
by the same authorized operator in order to modify the function or introduce a new function, to the
extent that this equipment is not a tool.Produced by the Manufacturer and commercialized by the
Manufacturer or by his authorized dealers (see par. 6.3).
Original option(later original) Attachment produced by the Manufacturer and commercialized by the Manufacturer or his authorized
dealers (see par. 6.2).
Compatible attachment Attachment suitable to be assembled on a specific basic machine (see par. 6.3.1).
Assembly Attachment assembly onto the basic machine, including the mechanic, hydraulic and electrical
(if required) connection.
Authorized dealer(later dealer) He is a dealer authorized by the Manufacturer who the Customer must address to, for assistance and
emergency maintenance or for the purchase of attachments or original interchangeable attachments.
ROPS (Roll Over Protection
Structure)
Metal structure that protects the operator in charge seated at the driving seat in case of the machine
rolling.
FOPS (Falling Objects
Protective Structure) Structure protecting the operator in charge sitting at the driving seat in case of falling objects.
Assembly factory Options assembly by the manufacturer before the machine delivery.
Assembly after market Options assembly later, after the machine purchase.
1.4 Abbreviations
ca. Circa about N. Number
Chap. Chapter Pag. Page
PPE Personal Protective Equipment Par. Paragraph
Right Right Pos. Position
eg. Example Ref. Reference
FIG. Figure/s Left Left
hrs Time TAB. Table
MAX. Maximum See See
MIN. Minimum Q.ty Quantity
min Minutes Etc. Etcetera
1- DOCUMENT IDENTIFICATION

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
5/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
1.5 Consultation notes
Bold type text:
It highlights same significant sentences in the text and the references to paragraphs, figures, tables, etc.
Generic danger sign:
It highlights risks for health and security of the authorized operators and or risks of damage and malfunctioning of the machine.
Generic obligation sign:
It points out a rule (obligation to execute an action).
Generic ban sign or dedicated:
It highlights the ban of executing a specific action.
EX danger sign:
It highlights the danger of an explosion in places with explosive atmosphere.
Crossed vaste bin:
It highlights the ban of throwing electrical and electronic attachments vaste in the garbage bins.
TO USE THE MACHINE IN SAFETY IT IS COMPULSORY TO READ AND UNDERSTAND THIS MANUAL IN ALL ITS PARTS.
TO USE IN SAFETYA COMPATIBLEATTACHMENTASSEMBLED WITH THE MACHINE IT IS COMPULSORY TO READAND UNDERSTAND
THIS INSTRUCTION ATTACHMENT MANUAL IN ALL ITS PARTS.
THE SYMBOL PLACED AT THE BEGINNING OF A CHAPTER POINTS OUT WHO ARE THE AUTHORIZED OPERATORS
(SEE PAR. 1.6.1) TO CARRY OUT THE REPORTED INTERVENTIONS.
DANGER
IT HIGHLIGHTS A DANGER WITH A HIGH RISK DEGREE THAT, IF NOT AVOIDED, CAN CAUSE DEATH OR SEVERE INJURIES.
WARNING
IT HIGHLIGHTS A DANGER WITH AN AVERAGE RISK DEGREE THAT, IF NOT AVOIDED, CAN CAUSE DEATH OR SEVERE INJURIES.
ATTENTION
IT HIGHLIGHTS A DANGER WITH A LOW RISK DEGREE THAT, IF NOT AVOIDED CAN CAUSE LIGHT OR NOT SEVERE INJURIES.
DOCUMENT IDENTIFICATION -1

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
6/76
1.6 Receivers of the document
This manual is addressed only, to the operators authorized to use and to maintenance of the machine according to the specific
technical-professional competences required for the type of intervention.
1.6.1 Authorized operators
WARNING
AUTHORIZED OPERATORS MUST CARRY OUT ONLY THE INTERVENTIONS OF THEIR SPECIFIC COMPETENCE ON THE MACHINE.
THE AUTHORIZED OPERATORS, BEFORE EXCUTING ANY INTERVENTION ON THE MACHINE, MUST MAKE SURE OF BEING IN
FULL POSSESSION OF THEIR PSYCO-PHYSICAL FACULTIES, THAT TO GUARANTEE ALWAYS THE OBSERVANCE OF THE SAFETY
CONDITIONS.
OPERATOR IN CHARGE
He is a professionally trained operator who, in full obedience of the legislation in force in the country of use, is qualified to the
driving of the machine and to carry out only:
• The regulations.
• The normal use.
• The normal maintenance.
All the operations must be executed in the absolute observance of the instructions reported in this operating manual.
AUTHORIZED TECHNICIAN
He is a qualified technician, placed at disposal by the dealer, who has got a specific knowledge of the machine and he is qualified
to carry out the requires technical assistance, normal and extraordinary maintenance and/or operations not reported in this
instruction manual.
TAB. 1
1.7 Warranty
As regards the warranty conditions see par. 11.8.
If found that the parties do not intend to submit the controversies rising from the supply contract, to an arbitral judgement or in
any other case where it is required the verdict of an organ of the ordinary Court, only the law Court in Vicenza will have territorial
jurisdiction.
1- DOCUMENT IDENTIFICATION

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
7/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
8/76
2 MACHINE IDENTIFICATION
2.1 Copy of CE accordance statement
CE ACCORDANCE STATEMENT
Manufacturer MULTIONE SRL SOCIETÀ UNIPERSONALE
via Palù, 6/8
36040 Grumolo Delle Abbadesse (VI) Italy
Tel. [phone]
[email protected]
Fax [phone]
www.multione.com
We declare that the machine is so identified
Designation Self-moving Compact wheel loader, articulated frame, equipped with multipurpose quick coupler, MULTIONE
Model M1 6.3 M1 6.3+ M1 6.3S
Serial number ....................................
It is conform to the instructions of the following directives
2006/42/CE Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending
Directive 95/16/EC (recast)
2004/108/CE Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation
of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2000/14/CE
Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws
of the Member States relating to the noise emission in the environment by equipment for use outdoors
Notified organisation
VERICERT SRL - Certificazioni e Verifiche
Via S. Cavina n. 19 - 48100 Ravenna - Italy
NOTIFIED ORGANISATION N. 1878
Evaluation procedure In-house control of the production with evaluation of the technical
documentation and recurrent controls.
Model M1 6.3 M1 6.3+ M1 6.3S
Guaranteed sound power level (LWA)98 98 98
Sound power level measured (LWA)96 96 96
Net installed power 18,2 kW @ 3200 rpm 18,2 kW / 3200 rpm 18,2 kW / 3200 rpm
Test engine rpm 2200 rpm 2200 rpm 2200 rpm
Main regulations harmonized among those applied
EN 12100:2010 Safety of machinery. Basic concepts, general principles for design
EN 474-1:2006 / A4:2013 Earth-moving machinery - Safety - Part 1: General requirements
EN 474-3:2006 / A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders
Person authorized to keep updated the Technical Booklet
Name and roll Carraro Giuseppe - Technical Manager
Person authorized to draw up the statement
Name and roll Carraro Giuseppe - Technical Manager
Place Grumolo delle Abbadesse (VI) Italy Date .........../.........../..........
Signature
2- MACHINE IDENTIFICATION

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
9/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
2.2 Designation
The machine in question is so named:
Self-moving Compact wheel loader, articulated frame, equipped with multipurpose
quick coupler, MULTIONE
6 Series - Models 6.3 - 6.3+ - 6.3S
N.B. The model of the machine is reported on the statement CE of conformity and on the marking CE applied to the machine.
3 IMPORTANT INFORMATION ABOUT SAFETY
3.1 General instructions
DANGER
IT IS COMPULSORY TO CONTROL CONSTANTLY THE PROPER FUNCTIONING OFALL SHELTERS AND THE PROTECTION DEVICES
INSTALLED ON THE MACHINE.
IT IS COMPULSORY TO SUBSTITUTE AT THE RIGHT TIME POSSIBLE SHELTERS AND NOT WORKING WELL AND/OR DAMAGED
PROTECTION DEVICES.
DANGER
IT IS FORBIDDENTO SUBSTITUTEANY SHELTER, PROTECTION DEVICE OR ANYCOMPONENT WITH NON ORIGINALSUBSTITUTES.
IT IS FORBIDDEN TO TAMPER, EXCLUDE AND/OR TAKE AWAYANY SHELTER OR PROTECTION DEVICE PLACED ON THE MACHINE.
PARTICULARLY THE ROPS STRUCTURE CANNOT IN ANY CASE BE DRILLED, WELDED OR MODIFIED, IN CASE OF DAMAGE IT
CANNOT BE REPAIRED BUT IT MUST BE SUBSTITUTED BY AN ORIGINAL SUBSTITUTE. WHAT IS ABOVE IT IS VALID UNLESS
THERE IS A DIFFERENT WRITTEN DISPOSITION BY THE MACHINE MANUFACTURER.
3.2 Residual risks
We inform the operator in charge that though the manufacturer has adopted all possible technical structural precautions to make
the machine sure, possibile residual risks remain. They are described in succession.
DANGER
TO MINIMIZE THE EXPOSITION TO RESIDUAL RISKS IT IS COMPULSORY TO RESPECT THE SAFETY SIGNS (SEE PAR. 4.8) AND
WEAR THE INDIVIDUAL PROTECTION (SEE PAR. 4.10) REPORTED IN THIS MANUAL.
WARNING
THE RESIDUAL RISKS REPORTED IN SUCCESSION CONCERN THE MACHINE WITHOUT ASSEMBLED EQUIPPING. WE REFER TO
THE EQUIPPING INSTRUCTION MANUAL FOR THE DESCRIPTION OF THE RESIDUAL SPECIFIC EQUIPPING RISKS.
THERE IS THE RESIDUAL RISK OF INJURIES IN CONSEQUENCE OF FALL OF OBJECTS OR MATERIAL FROM THE POSSIBLE
ATTACHMENT ASSEMBLED TO THE MACHINE. CONSULT THE ASSEMBLED EQUIPPING INSTRUCTION MANUAL TO VERIFY THE
PRESENCE OF THIS RISK.
RESIDUAL RISK N. 1
THERE IS DANGER OF BURN FOR CONTACT IF THE AUTHORIZED OPERATOR GET INTO CONTACT WITH THE HOT PARTS SUCH
AS QUICK CONNECTIONS, HYDRAULIC CYLINDERS, HYDRAULIC PIPES, PARTS OF THE ENGINE THAT, OWING TO PROLONGED
USE OF THE MACHINE CAN REACH HIGH TEMPERATURES.
IT IS COMPULSORY TO RESPECT THE ASSEMBLY PROCEDURES, ATTACHMENT DISASSEMBLY (SEE CHAP. 8) AND ORDINARY
MAINTENANCE PROCEDURES (SEE CHAP. 9) DESCRIBED IN THIS MANUAL.
IMPORTANT INFORMATION ABOUT SAFETY -3

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
10/76
RESIDUAL RISK N. 2
THERE IS THE DANGER OF INJURIES OWING TO CONTACT WITH MOBILE PARTS IN MOTION IF THE AUTHORISED OPERATOR
DOES NOT RESPECT THE INSTRUCTIONS REPORTED IN THIS MANUAL AND, PARTICULARLY, STRECHES OUT HIS UPPER LIMBS
OUTSIDE THE DRIVING SEAT DURING THE ORDINARY WORKING OF THE MACHINE.
IT IS COMPULSORY TO RESPECT THE PROCEDURES OF ASSEMBLY, DISASSEMBLY OF THE EQUIPPING (SEE CHAP. 8), THE
ORDINARY MAINTENANCE PROCEDURES (SEE CHAP. 9) AND THE INSTRUCTIONS FOR A RIGHT POSITION TO ASSUME DURING
THE USE (SEE PAR. 8.3.1.1) DESCRIBED IN THIS MANUAL.
RESIDUAL RISK N. 3
THERE IS THE DANGER OF CRUSHING FOR A POSSIBLE FALL OF THE ATTACHMENT IF THE AUTHORISED OPERATOR DOES NOT
RESPECT THE INSTRUCTIONS REPORTED IN THIS MANUAL.
IT IS COMPULSORY TO RESPECT THE EQUIPPING DISASSEMBLY PROCEDURES (SEE CHAP. 8) DESCRIBED IN THIS MANUAL.
RESIDUAL RISK N. 4
THERE IS THE DANGER OF CRUSHING FOR ROLLING OVER OF THE MACHINE IF THE AUTHORISED OPERATOR DOES NOT
RESPECT THE INSTRUCTIONS REPORTED IN THIS MANUAL AND, PARTICULARLY, IF HE DOES NOT FASTEN HIS SAFETY-BELT.
IT IS COMPULSORY TO RESPECT THE PROCEDURES OF THE ORDINARY USE OF THE MACHINE (SEE CHAP. 8) DESCRIBED IN
THIS MANUAL.
RESIDUAL RISK N. 5
THERE IS THE DANGER OF INJURIES TO HEARING IF THE AUTHORISED OPERATOR DOES NOT RESPECT THE INSTRUCTIONS
REPORTED IN THIS MANUAL AND IF HE DOES NOT WEAR ANTI-NOISE HEADPHONES.
IT IS COMPULSORY TO WEAR PERSONAL PROTECTION DEVICES INDICATED IN THIS MANUAL (SEE PAR. 4.10).
RESIDUAL RISK N. 6
THERE IS THE DANGER OF CRUSHING DURING THE STEERING PHASE OF THE MACHINE IF THE AUTHORISED OPERATOR DOES
NOT RESPECT THE INSTRUCTIONS REPORTED IN THIS MANUAL, PARTICULARLY, OPERATES THE CONTROL BUTTONS FROM
A PLACE DIFFERENT FROM THE DRIVING ONE AND HE DOES NOT CONTROL THE PRESENCE OF PEOPLE, ANIMALS AND OR
THINGS NEARBY THE MACHINE.
IT IS COMPULSORY TO OPERATE THE CONTROL BUTTONS ONLY AND EXCLUSIVELY FROM THE DRIVING SEAT AND MAKE SURE
THAT WITHIN A RADIUS OF TEN METRES, THERE ARE NO THINGS, ANIMALS OR PEOPLE WHOSE SAFETY CAN BE ACCIDENTALLY
COMPROMISED.
RESIDUAL RISK N. 7
THERE IS THE DANGER OF FEET CRUSHING DURING THE STEERING PHASE OF THE MACHINE IF THE AUTHORISED OPERATOR
DOES NOT RESPECT THE INSTRUCTIONS REPORTED IN THIS INSTRUCTION MANUAL.
IT IS COMPULSORY TO MOVE THE MACHINE WITH THE CABIN DOOR CLOSED (IF THERE IS ONE) AND WITHOUT STRETCHING
THE LEGS AND THE ARMS OUTSIDE THE DRIVING SEAT.
3.3 Transport and lifting
WARNING
IT IS FORBIDDEN THE RAISING OF THE MACHINE WITH ANY MEAN.
THE MACHINE WITH THE ENGINE SWITCHED OFF IS LOCKED IN AN HYDRAULIC WAY AND IT CANNOT BE MOVED.
IT IS FORBIDDEN TO TOW THE MACHINE OFF BY ANY MEAN OF TRANSPORT.
3- IMPORTANT INFORMATION ABOUT SAFETY

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
11/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
3.4 Maintenance
DANGER
ATTENTION TO CARRY OUT THE MAINTENANCE OPERATION ON THE MACHINE: THIS MUST BE IN THE “SAFETY CONDITION”
(SEE PAR. 9.2).
DANGER
IT IS FORBIDDEN TO THE AUTHORISED OPERATORS TO LEAVE UNATTENDED THE MACHINE DURING THE MAINTENANCE
OPERATIONS WITHOUT MAKING SURE TO HAVE ARRANGED ANY PRECAUTION SUITABLE TO AVOID TO START ACCIDENTALLY
THE MACHINE OR SOME OF ITS PARTS.
DANGER
DURING ALL MAINTENANCE OPERATIONS THAT SHOULD BE CARRIED OUT ON THE MACHINE WITH ITS LIFTING ARM RAISED IT
IS COMPULSORY TO INSERT THE LOCK BRACKET OF THE LIFTING ARM (SEE PAR. 9.3).
WARNING
THE AUTHORISED OPERATORS MUST CARRY OUT ONLY THE MAINTENANCE OPERATIONS REQUIRED ACCORDING TO THEIR
SPECIFIC PROFESSIONAL COMPETENCE AND ON THE PERMISSION OF THE PERSON IN CHARGE.
LUBRICANT FLUIDS AND POSSIBLE OTHER FLUID COMING FROM MAINTENANCE MUST NOT BE UNLOADEN IN THE
ENVIRONMENT. THESE PRODUCTS ARE CONSIDERED POLLUTING AND DANGEROUS AND THEY MUST BE COMPULSORELY
TAKEN AWAY CHARGING AUTHORISED COMPANIES QUALIFIED FOR DIFFERENT PRODUCT TIPOLOGIES, IN THE ABSOLUTE
RESPECT OF THE REGULATION IN FORCE IN THE COUNTRY WHERE THE MACHINE IS USED.
ATTENTION
IT IS MANDATORY TO KEEP THE MACHINE IN A SCRUPULOUSLY CLEAN CONDITION.
IMPORTANT INFORMATION ABOUT SAFETY -3

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
12/76
4 DESCRIPTION OF THE MACHINE
The machine has been planned and carried out to operate according to the type of attachment assembled in agricultural environment,
green spaces, farming and gardening, building and road yards both in the private sector and in the public one.
The machine is provided with a heat diesel engine, that sets a series of hydraulic pumps.
These feed an hydraulic circuit at high pressure that enables:
1) The four wheels whose the machine is equipped (each is moved by an hydraulic engine).
2) The steering system, formed by a hydraulic cylinder which acts on the articulation of the central pivot steering of the frame.
3) A lifting arm (in the front part of the machine).
4) The attachment assembled in case on the machine.
The control panel is placed on the driving seat.
4.1 Main parts and their functions
FIG. 1
1
2
3
45
6
7
8
9
10
11
18
19
20
21
22
12
13
214
215
216
217
4- DESCRIPTION OF THE MACHINE

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
13/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
Ref. Part Function
1Footrest step It allows to get on the machine safely.
2Pedals They allow to determine the direction and speed.
3Wheel It allows to change direction during the translation of the machine.
4ROPS It protects the operator in charge in case of rolling over of the machine.
5Roof and FOPS structure It protects the operator in charge from bad weather and from the direct exposure to the
sunbeams, the FOPS structure protects the operator in charge against the object fall.
6Document compartment It contains the operating manual.
7Rear reflectors They make more visible the car.
8Opening engine space compartment It protects the engine and prevents the operators in charge to get in touch accidentally
with the mobile parts and high parts.
9Fuel tank cap It allows refuelling.
10 Engine It moves the hydraulic pumps.
11 Coupling for towing hook or
counterweight (option)
It allows to connect to the machine a coupler for light trailers or to install some
counterweight to increase the stability of the machine.
12 Central steering joint Actuated by a hydraulic cylinder allows the steering of the machine.
13 Wheels They support and allow the machine movement.
14 Disconnecting battery key It allows to disconnect the battery.
15 Working lights They provide more visibility in a situation of poor lighting.
16 Control panel It assembles operating controls of the machine and of the possible attachment assembled
to the machine.
17 Driving seat supplied with armrests and
safety belt It is for the operator in charge to be seated and fastened to the machine.
18 Hydraulic circuit pipes They allow the passage of the hydraulic oil for assembled equipping working.
19 Lifting arm It raises possible attachment assembled of the machine.
20 Multi - connector It allows the connection to the attachment hydraulic circuit.
21 12 V DC power outlet It provides power to any electrical devices on the assembled attachment.
22 Quick coupler It allows the mechanic connection to attachment.
TAB. 2
DESCRIPTION OF THE MACHINE -4

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
14/76
4.2 Seats taken by authorised operators
FIG. 2
DANGER
THE OPERATOR DURING THE WORKING PHASES MUST REMAIN ON BOARD OF THE MACHINE (SEAT B) AND ONLY WITH
THE MACHINE IN “SAFETY STATE” (SEE PAR. 9.2 AND PAR. 9.3) CAN OCCUPY THE OTHER WORKING PLACES SHOWN IN
FIG. 2.
4- DESCRIPTION OF THE MACHINE

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
15/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
Operator in charge Place Description of the operation
Standing on the back side:
• for the refuelling (see par. 8.3.8);
• to connect/disconnect the battery (right side) (see par. 7.1);
• to operate required maintenance operations on the machine and on the engine (see chap. 9).
Seated at the driving seat in the right position of use and with the safety belt fastened during the
ordinary working (see par. 8.3).
Standing on the left side of the machine to get on to the driving seat (see par. 8.3.1).
Standing on the front left side of the machine to carry out the assembly and disassembly of the
attachment (see par. 8.3.4 and par. 8.3.5).
Standing on the right front side of the machine to carry out the assembly and disassembly of the
attachment (see par. 8.3.4 and par. 8.3.5).
TAB. 3
DESCRIPTION OF THE MACHINE -4

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
16/76
4.3 Control devices
The control devices are arranged in the machine as shown in FIG. 3.
FIG. 3
Ref. Name Function
1Air vent (optional) It is adjustable and allows the escape of hot air produced by the heating system.
2Parking brake lever
(only on 6.3 model)
It is used to block the machine during the parking and the waiting.
• Position “Down”: brake off.
• Position: “Up”: brake inserted and locked.
3Steering wheel The wheel allows to change direction during the machine operating.
4Steering wheel adjustment lever
It allows to adjust the position of the steering wheel.
• Pos. “Up”: the steering wheel is free to be adjusted.
• Pos: “Down”: the steering wheel is blocked in position.
cont.
4- DESCRIPTION OF THE MACHINE

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
17/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
Ref. Name Function
5Ignition lock key
By Key on and turned to the right carries out respectively:
• Position: “0”: machine off.
• Position “1”: power to control panel.
• Position “2”: pre-heating (glow plug ignition).
• Position “3”: starting the machine.
6Multifunction device A collection of indicators and warning lights (see par. 4.3.2).
7Multifunction joystick It controls the movement of the lifting arm, of the quick coupler and the operation of the possible
assembled attachment (see par. 4.3.3).
8Throttle
It regulates the engine speed.
• Position “Hare” (forward): it increases engine rpm.
• Position “Turtle” (backward): it lowers engine rpm.
9Button commands See (see par. 8.2)
10 Radio with Bluethoot Optional.
11 Buzzer (overheating engine
alarm) It is an acoustic device that is activated when there is an abnormal overheating of the engine.
12 Proportional pedal forward Pressed downwards (with the right foot): allows the forward movement of the machine and
increases its speed in proportion to the pressure exerted on the same.
13 Proportional pedal backward Pressed downwards (with the right foot): allows the backward movement of the machine and
increases its speed in proportion to the pressure exerted on the same.
14
Heating temperature
control knob
(option)
It controls the heating temperature.
• Rotated clockwise it increases the temperature.
• Rotated counterclockwise it decreases the temperature.
TAB. 4
DESCRIPTION OF THE MACHINE -4

MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
18/76
4.3.1 Button commands
ATTENTION
THE DISPOSITION OF THE BUTTONS CAN VARY ACCORDING TO THE FITTING OUT.
Ref. Name Function
1Attachment release
button (option)
Pressed (at maintained action) while multifunction joystick yellow
selector (TAB. 7 - Ref. 5) in “FORWARD” position, it allows the
release of attachment.
2Power switch DC12V
Three-position switch, it powers the socket on the lifting arm to operate any electrical
device on attachment assembled to the machine (eg.: chimney on the snow blower).
The switch has three positions:
• Position “Forward”: it powers the socket (eg.: rotation of the
snow blower to the right).
• Position “Central”: it interrups the supply of the socket.
• Position “Backward”: it reverses the polarity of the socket (eg.:
rotation of the chimney of the snow blower to the left).
3Sound warning signal Pressed, it activates the emergency sound warning signal.
4Heating switch (option)
3 position switch: it activates the heating of the cabin:
• Pos. “0” (starting position): heating off.
• Pos. “1” (pressed): heating on: first speed of the fan.
• Pos. “2” (pressed again): heating on: second speed of the fan.
5DBS switch
(Dynamic Block System)
2 position switch: it allows two wheels (same side, front and rear) to have the same
speed.
It can be inserted on the machine in motion or stopped.
• Pos. “Backward”: all wheels run turn at the same speed and you
get maximum traction.
• Pos. “Forward”: the wheels are free to run at different speed
while steering (eg.: to avoid damaging the work surface).
6Parking brake switch Pressed it activates the parking brake. It should be used only when
the machine stops.
7Working lights switch
2 position switch.
• Pos. “On”: it turns on the headlights.
• Pos. “Off”: it turns off the headlights.
8Floating system switch
(option)
Pressed it activates the floating system of the lifting arm.
WARNING: The lifting capacity of the arm is reduced and the
function of the parallelogram is inhibited.
9Heating seat switch
(option) Pressed it activates the heating system of the seat.
cont.
4- DESCRIPTION OF THE MACHINE