MultiOne 2 Series User manual

INSTRUCTION
MANUAL
2 SERIES
SELF-MOVING COMPACT WHEEL LOADER,
ARTICULATED FRAME, EQUIPPED WITH
MULTIPURPOSE QUICK COUPLER
MultiOne s.r.l -Translation of the original instructions - COD. CM170003EN- r.04 - EN

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
1/70
MultiOne SRL
INDEX
1 DOCUMENT IDENTIFICATION ........................................ 3
1.1 Designation ........................................................................... 3
1.2 Identification .......................................................................... 3
1.3 Glossary ................................................................................ 4
1.4 Abbreviations......................................................................... 4
1.5 Consultation notes................................................................. 5
1.6 Receivers of the document.................................................... 6
1.6.1 Authorized operators ......................................................... 6
1.7 Warranty................................................................................ 6
2 MACHINE IDENTIFICATION ............................................ 8
2.1 Copy of CE accordance statement........................................ 8
2.2 Designation ........................................................................... 9
3 IMPORTANT INFORMATION ABOUT SAFETY .............. 9
3.1 General instructions .............................................................. 9
3.2 Residual risks........................................................................ 9
3.3 Transport and lifting............................................................. 10
3.4 Maintenance.........................................................................11
4 DESCRIPTION OF THE MACHINE................................ 12
4.1 Main parts and their functions ............................................. 12
4.2 Seats taken by authorised operators................................... 14
4.3 Control devices.................................................................... 15
4.3.1 Control panel ................................................................... 16
4.3.2 Button commands............................................................ 18
4.3.3 Cabin commands............................................................. 20
4.4 Shelters and protection devices .......................................... 21
4.5 Intended use........................................................................ 22
4.5.1 Use limits and technical data........................................... 22
4.5.2 Load diagram................................................................... 24
4.5.3 Hydraulic flow/engine speed diagram.............................. 25
4.6 Reasonable foreseeable misuse......................................... 26
4.7 Safety signs......................................................................... 27
4.8 Emissions............................................................................ 31
4.8.1 Sound level...................................................................... 31
4.8.2 Vibrations......................................................................... 31
4.9 Personal protective equipment............................................ 31
5 TRANSPORT AND HANDLING ..................................... 32
5.1 Transport ............................................................................. 32
5.2 Handling .............................................................................. 32
5.2.1 Installation procedure of the steering lock bracket .......... 33
5.3 Storage................................................................................ 34
6 ASSEMBLY AND INSTALLATION ................................. 34
6.1 Assembly............................................................................. 34
6.2 Options................................................................................ 34
6.3 Attachments ....................................................................... 34
6.3.1 Available attachments...................................................... 34
6.3.2 Assembly of the attachments .......................................... 35
6.4 Back-weights....................................................................... 35
7 PRE-START INSPECTION ............................................. 36
7.1 Connecting / disconnecting battery ..................................... 36
8 OPERATION ................................................................... 37
8.1 Adjustments......................................................................... 37
8.1.1 Adjustment of the driving seat ......................................... 37
8.2 Checks before ignition......................................................... 38
8.3 Normal operations............................................................... 38
8.3.1 Procedure to get on to the operating position of the
machine........................................................................... 38
8.3.2 Starting up ....................................................................... 39
8.3.3 Handling .......................................................................... 39
8.3.4 Assembly of the attachment ............................................ 41
8.3.5 Disassembly of the attachment ....................................... 44
8.3.6 Use of the attachment ..................................................... 45
8.3.7 Turning off the machine................................................... 45
8.3.8 Parking brake .................................................................. 46
8.3.9 Refuelling......................................................................... 46
8.4 Functions / exceptional situations ....................................... 47
8.4.1 Instability of the machine................................................. 47
8.4.2 Overpressure in the hydraulic circuit ............................... 47
8.4.3 Loss of control ................................................................. 47
8.4.4 Emergency exit of the cabin ............................................ 48
8.4.5 Block machine with the lift arm raised ............................. 48
8.4.6 Towing the machine on.................................................... 48
8.4.7 Jump start........................................................................ 49
9 MAINTENANCE.............................................................. 50
9.1 General warnings ................................................................ 50
9.2 Safety status of the machine............................................... 50
9.3 Installation safety block on the lifting arm............................ 50
9.4 Opening engine cover ......................................................... 51
9.5 Ordinary maintenance table ................................................ 51
9.6 Extraordinary maintenance ................................................. 52
9.7 Machine maintenance ......................................................... 53
9.7.1 Cleaning of the machine.................................................. 53
9.7.2 Check tyres pressure....................................................... 53
9.7.3 Check structural integrity and tightening bolts................. 53
9.7.4 Battery check................................................................... 53
9.7.5 Hydraulic oil level............................................................. 54
9.7.6 Hydraulic oil filter change ................................................ 55
9.7.7 Suction oil filter change ................................................... 56
9.7.8 Hydraulic oil change ........................................................ 57
9.7.9 Fuses............................................................................... 58
9.7.10 Greasing points ............................................................... 58
9.8 Engine maintenance............................................................ 60
9.8.1 Check engine oil level...................................................... 60
9.8.2 Air filter check.................................................................. 61
9.9 Troubleshooting................................................................... 62
10 SPARE PARTS ............................................................... 63
10.1 Filter code............................................................................ 63
INDEX

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
MultiOne SRL
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
2/70
INDEX
11 ANNEXES....................................................................... 64
11.1 Road light kit (option) .......................................................... 64
11.2 Parallelogram ...................................................................... 64
11.3 Cab (option)......................................................................... 64
11.4 Back-weights (option).......................................................... 65
11.5 Tyres pressure..................................................................... 66
11.6 Warranty terms.................................................................... 67
11.6.1 General rules ................................................................... 67
11.6.2 Scheduled maintenance .................................................. 67
11.6.3 Exclusion of warranty ...................................................... 67
11.6.4 Warranty expiration.......................................................... 67
11.6.1 Notes ............................................................................... 67
11.7 Slope guide ......................................................................... 69

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
3/70
MultiOne SRL
DOCUMENT IDENTIFICATION -1
WARNING
BEFORE OPERATING THE MACHINE, THE OPERATOR MUST READ AND UNDERSTAND ALL INSTRUCTIONS OF THIS MANUAL.
THE MANUAL MUST BE CAREFULLY KEPT INSIDE THE MACHINE TILL ITS DISMISSION.
Presentation
Dear customer,
We will, first of all, thank you for the confidence you gave us purchasing your new “Self-moving Compact wheel loader, articulated
frame, equipped with multipurpose quick coupler, MULTIONE 2 Series”.
We are sure your expectations will be satisfied since the technological level reached by our products and thank to a
continuous engagement that stimulates us daily to increase to be able to face the continuous, technological, productive and trade
transformations.
We are sure we can also face any your future working requirement, we are pleased to remain at your disposal and offer
you all our experience and knowledge for the best solution of any your query.
1 DOCUMENT IDENTIFICATION
1.1 Designation
The following document is called “operating manual” (later on manual). It has been edited in accordance with the essential
requirements of security 1.7.4 of the Enclosure l of the machine Directive 2006/42/CE.
ATTENTION
THIS MANUAL MUST BE ALWAYS AT AUTHORIZED OPERATORS’ DISPOSAL AND BE NEARBY THE MACHINE WELL KEPT AND
PRESERVED.
THIS MANUAL MUST BE COMPULSORILY DELIVERED TOGETHER WITH THE MACHINE IN CASE IT WILL BE TRANSFERRED TO
ANOTHER USER.
WE ADVISE YOU TO COPY OUT THE IDENTIFICATION DATA OF THE DOCUMENT: CODE, ISSUE AND REVISION (SEE COVER) TO
REQUEST AGAIN COPY OF THE MANUAL TO THE MANUFACTURER IN CASE OF LOSS OR DETERIORATION OF IT.
THIS MANUAL REFLECTS THE STATE OF THE TECHNOLOGY AND KNOW-HOW AT THE MOMENT OF THE MACHINE MARKETING
AND IT CANNOT BE CONSIDERED INADEGUATE ONLY BECAUSE, ACCORDING TO NEW EXPERIENCES, CAN BE UPDATED LATER
1.2 Identification
The manual is identified though the following data reported in the table on the cover and in annotation:
• Abbreviation of the language.
• Original instructions or translation of them.
• Symbol ISO 7000.
• Identifying code (ID).
• Issue.
• Revision (or revision date).
TRANSLATION OF THE
ORIGINAL INSTRUCTIONS
Code Issue Revision
CM170003EN 16.02.17 04 (11.07.18)
This manual is the “Translation of original instructions” identified as follows:
ISTRUZIONI ORIGINALI
Codice Emissione Revisione
CM170003 12.01.17 04 (11.07.18)

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
MultiOne SRL
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
4/70
1.3 Glossary
Term Definition
Basic machine
(later machine)
Self-moving Compact wheel loader, articulated frame, equipped with multipurpose quick coupler, planned
to carry out various functions using interchangeable attachments.
Original interchangeable
attachments(later attachment)
According to the article 2, b) of the Machine Directive 2006/42/CE it is a machine specified as: device
that after the starting up of a machine or of a tractor, is assembled with the machine or with the tractor
by the same authorized operator in order to modify the function or introduce a new function, to the
extent that this attachment is not a tool. Produced by the Manufacturer and commercialized by the
Manufacturer or by his authorized dealers (see par. 6.3).
Original option(later original) Attachment produced by the Manufacturer and commercialized by the Manufacturer or his authorized
dealers (see par. 6.2).
Compatible attachment Attachment suitable to be assembled on a specific basic machine (see par. 6.3.1).
Assembly Attachment assembly onto the basic machine, including the mechanic, hydraulic and electrical
(if required) connection.
Authorized dealer(later dealer) He is a dealer authorized by the Manufacturer who the Customer must address to, for assistance and
emergency maintenance or for the purchase of attachments or original interchangeable attachments.
ROPS (Roll Over Protection
Structure)
Metal structure that protects the operator in charge seated at the driving seat in case of the machine
rolling.
FOPS (Falling Objects
Protective Structure) Structure protecting the operator in charge sitting at the driving seat in case of falling objects.
Assembly factory Options assembly by the manufacturer before the machine delivery.
Assembly after market Options assembly later, after the machine purchase.
1.4 Abbreviations
ca. Circa about N. Number
Chap. Chapter Pag. Page
PPE Personal Protective Equipment Par. Paragraph
Right Right Pos. Position
eg. Example Ref. Reference
FIG. Figure/s Left Left
hrs Time TAB. Table
MAX. Maximum See See
MIN. Minimum Q.ty Quantity
min Minutes Etc. Etcetera
1- DOCUMENT IDENTIFICATION

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
5/70
MultiOne SRL
1.5 Consultation notes
Bold type text:
It highlights same significant sentences in the text and the references to paragraphs, figures, tables, etc.
Generic danger sign:
It highlights risks for health and security of the authorized operators and or risks of damage and malfunctioning of the machine.
Generic obligation sign:
It points out a rule (obligation to execute an action).
Generic ban sign or dedicated:
It highlights the ban of executing a specific action.
EX danger sign:
It highlights the danger of an explosion in places with explosive atmosphere.
Crossed waste bin:
It highlights the ban of throwing electrical and electronic attachments waste in the garbage bins.
TO USE THE MACHINE IN SAFETY IT IS COMPULSORY TO READ AND UNDERSTAND THIS MANUAL IN ALL ITS PARTS.
TO USE IN SAFETYACOMPATIBLE ATTACHMENT ASSEMBLED WITH THE MACHINE IT IS COMPULSORYTO READ AND UNDERSTAND
THIS INSTRUCTION ATTACHMENT MANUAL IN ALL ITS PARTS.
THE SYMBOL PLACED AT THE BEGINNING OF A CHAPTER POINTS OUT WHO ARE THE AUTHORIZED OPERATORS
(SEE PAR. 1.6.1) TO CARRY OUT THE REPORTED INTERVENTIONS.
DANGER
IT HIGHLIGHTS A DANGER WITH A HIGH RISK DEGREE THAT, IF NOT AVOIDED, CAN CAUSE DEATH OR SEVERE INJURIES.
WARNING
IT HIGHLIGHTS A DANGER WITH AN AVERAGE RISK DEGREE THAT, IF NOT AVOIDED, CAN CAUSE DEATH OR SEVERE INJURIES.
ATTENTION
IT HIGHLIGHTS A DANGER WITH A LOW RISK DEGREE THAT, IF NOT AVOIDED CAN CAUSE LIGHT OR NOT SEVERE INJURIES.
DOCUMENT IDENTIFICATION -1

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
MultiOne SRL
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
6/70
1- DOCUMENT IDENTIFICATION
1.6 Receivers of the document
This manual is addressed only, to the operators authorized to use and to maintenance of the machine according to the specific
technical-professional competencies required for the type of intervention.
1.6.1 Authorized operators
WARNING
AUTHORIZED OPERATORS MUST CARRY OUT ONLY THE INTERVENTIONS OF THEIR SPECIFIC COMPETENCE ON THE MACHINE.
THE AUTHORIZED OPERATORS, BEFORE EXECUTING ANY INTERVENTION ON THE MACHINE, MUST MAKE SURE OF BEING IN
FULL POSSESSION OF THEIR PSYCO-PHYSICAL FACULTIES, THAT TO GUARANTEE ALWAYS THE OBSERVANCE OF THE SAFETY
CONDITIONS.
OPERATOR IN CHARGE
He is a professionally trained operator who, in full obedience of the legislation in force in the country of use, is qualified to the
driving of the machine and to carry out only:
• The regulations.
• The normal use.
• The normal maintenance.
All the operations must be executed in the absolute observance of the instructions reported in this operating manual.
AUTHORIZED TECHNICIAN
He is a qualified technician, placed at disposal by the dealer, who has got a specific knowledge of the machine and he is qualified
to carry out the requires technical assistance, normal and extraordinary maintenance and/or operations not reported in this
instruction manual.
TAB. 1
1.7 Warranty
As regards the warranty conditions see par. 11.6.
If found that the parties do not intend to submit the controversies rising from the supply contract, to an arbitral judgement or in
any other case where it is required the verdict of an organ of the ordinary Court, only the law Court in Vicenza will have territorial
jurisdiction.

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
7/70
MultiOne SRL

Self-moving compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 2 Series
MultiOne SRL
Instruction manual (Translation of original instructions)
CM170003EN - 16.02.17 - 04 (11.07.18)
8/70
2 MACHINE IDENTIFICATION
2.1 Copy of CE accordance statement
CE ACCORDANCE STATEMENT
Manufacturer MULTIONE SRL SOCIETÀ UNIPERSONALE
via Palù, 6/8
36040 Grumolo Delle Abbadesse (VI) Italy
Tel. [phone]
[email protected]
Fax [phone]
www.multione.com
We declare that the machine is so identified
Designation Self-moving Compact wheel loader, articulated frame, equipped with multipurpose quick coupler, MULTIONE
Model M1 2.3
Serial number ....................................
It is conform to the instructions of the following directives
2006/42/CE Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending
Directive 95/16/EC (recast).
2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of
the Member States relating to electromagnetic compatibility (recast).
2000/14/CE
Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws
of the Member States relating to the noise emission in the environment by equipment for use outdoors.
Notified organisation
VERICERT SRL - Certificazioni e Verifiche
Via S. Cavina n. 19 - 48100 Ravenna - Italy
NOTIFIED ORGANISATION N. 1878
Evaluation procedure In-house control of the production with evaluation of the
technical documentation and recurrent controls.
Model M1 2.3
Guaranteed sound power level (LWA)100 dB
Sound power level measured (LWA)97 dB
Net installed power 19,8 kW @ 3600 rpm
Test engine rpm 3000 rpm
Main regulations harmonized among those applied
EN 12100-1-2:2003 / A1:2009 Safety of machinery. Basic concepts, general principles for design
EN 474-1:2006 / A1:2009 Earth-moving machinery - Safety - Part 1: General requirements
EN 474-3:2006 / A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders
Person authorized to keep updated the Technical Booklet
Name and roll Carraro Giuseppe - Technical Manager
Person authorized to draw up the statement
Name and roll Carraro Giuseppe - Technical Manager
Place Grumolo delle Abbadesse (VI) Italy Date .........../.........../..........
Signature
2- MACHINE IDENTIFICATION