Multisensory Fitness SMART User guide

SMART Multisensory Fitness Training
One Station Portable
Set-up Manual
Revision 1.2
2014

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 2
Unlike other fitness equipment which may require additional insurance, SMART ProTrainer and SMART
Trainer have been approved by the Fitness Insurance Industry for use under general liability insurance.
Please check with your insurer to confirm insurance laws in your state.
PARTICIPANTS SHOULD CONSULT A DOCTOR BEFORE STARTING ANY EXERCISE PROGRAM.
The content of this workout program is made available with the understanding that Multisensory
Fitness, Inc. disclaims all responsibility for any injury incurred as a consequence of
engaging in this program without first consulting a physician or otherwise qualified health care
professional.
Thank You. Enjoy your new SMART system!
Multisensory Fitness, Inc.
www.multisensoryfitness.com

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 3
Table of Contents
Chapter 1...................................................................................................................................................................4
Introduction ..........................................................................................................................................4
Contents of Boxes ................................................................................................................................. 4
Required................................................................................................................................................4
Adding Filler for first time use only.......................................................................................................5
Chapter 2..................................................................................................................................................................6
SMART Portable 1 Assembly Instructions................................................................................................. 6
Unpack your SMART Portable 1 System ...............................................................................................6
Set-up the Station ................................................................................................................................. 7
Fill Systems with Pine Pellet.................................................................................................................. 8
Set-up the Master Control Box (MCB) .................................................................................................. 9
Connect Station by Plugging the 8 pin connector from the station into the power interconnect
board...................................................................................................................................................11
Verify that System Powers Up Correctly............................................................................................. 12
Moving the system to a new location.................................................................................................13

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 4
Chapter 1
Introduction
Welcome. Please read through this manual before starting your
installation as it will give you a complete idea of the scope of the
installation and ensure things are done in their proper order.
Should you have any questions please call our customer service line on:
1-800-900-8542 x 116. We will be happy to assist you in every way.
Contents of Boxes
Prior to opening any boxes, please inspect the outside of the box for
any damage that may have been done during shipping. If the boxes are
damaged in any way, please take a photograph of the damage as well
as one of the whole delivery and email it with a copy of your delivery
note, to: [e-mail]. After opening the
boxes please check for the following contents:
1 box at 99.5 x 51.5 x 6.5" weighing 155 lbs.
1 box at 30x20x18" weighing 40 lbs.
Station #1
o4’ x 8’ Training Station with pre-installed portable stand
o1 large protective bag for protecting the station when in
transit
One Master Control Box
oMaster Control Box
oElectrical 10’ power cord
o2 Remote controls
oSquare drive screwdriver
Pair of speakers with brackets.
Blue funnel
Filler plug tool
Ball kit containing balls, noodles, bean bags, etc.
Required
#1 flat head screwdriver
5 x 35lb Sand bags (Can be ordered from
Customer Service)

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 5
Adding Filler for first time use only
Ladder if filling the station
Rubber mallet for tapping down filler material
Padded dolly for moving the system once filled.
100lbs (3 bags) of Pine Pellets or equivalent as filler for the station to
provide stability during ball play. Once filled, keep the filler in the
system and move it in the bag provided.
Should you require greater stability and rebound from the station, we
recommend filling the system with 250lbs of dry sand. However, that
will impact the ease of moving the system with a net weight of 350lbs.
Set up time 15 minutes if not filling the station. 1 hour if filling the
station.
One or 2 adults
For operating instructions, refer to the following web sites:
http://multisensoryfitness.com/resources/smart-programming-manuals/
http://www.youtube.com/MultisensoryFitness

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 6
Chapter 2
SMART Portable 1 Assembly Instructions
Unpack your SMART Portable 1 System
1. Lay out the station on floor face down in the
blanket bag it was shipped in. Use this bag to
transport the station at all times.
2. Remove the station from the bag.
3. Be sure to protect the face of the system at all
times.
4. Stand the system upright.

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 7
Set-up the Station
1Using a flat-head screw driver to
unlatch the clips, open the two side
brackets so that the station is self-
standing.
2The side brackets will rotate out and
90 degrees to support the station in a
vertical position.
3Push the pins on the top and bottom
bracket of side frame to rotate them a
full 90 degrees and lock into position.
(It is helpful to have 2nd person).
4Remove the U‐stabilizer from the
back of the station and clip it into the
side frames to form a secure base on
the floor that supports the station.
Use the flat head screwdriver to
unlatch the clips that hold it in place.
5The station is now self-standing.
1To carry the system to where it is
needed for play, stand behind it and
lift it by the two target cups on the
back. The systems weighs 102lbs.

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 8
2Place sand bags on bottom U-
stabilizer pipe to stabilize station so it
will not tip over. Minimum 100lbs is
recommended.
Fill Systems with Pine Pellet
1. Using the square Filler Plug Tool, open the three
caps on the back on the station.
2. Insert the funnel into the first opening.
3. Standing on a ladder, pour the pine pellets into
the system until it is filled to the top.
4. Repeat at the top two openings.
5. Shake the system to ensure the pellets settle as
much as possible.
6. Close the caps tightly using the Filler Plug Tool.

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 9
Set-up the Master Control Box (MCB)
1. Remove the 7’ pipe from the back of
the station and secure it through 2 of
the couplers on the station.
2. Hang the Master Control Box (MCB)
onto the horizontal pipe by clipping it
on to the horizontal pipe the side of
the station.
3. Clip both speakers on the pipe. (One
on each side of the Master Control
Box)
4. Using you flat head screwdriver, open
the MCB face.

© 2014 Multisensory Fitness, Inc. • www.multisensoryfitness.com 10
5. Reach in to access the speaker
wires.
6. Pull both white speaker cables
through rear holes of RDB
7. Plug cables into speakers.
8. Unwind the panel cable from
the station.