Important notice
and disclaimer
COMPLETE GUIDE
IDLOCK.NO/202GUIDE
ID Lock 202 MULTI is designed to with-
stand harsh Nordic environment.
It operates in temperatures between
-25°C and 70°C.
For detailed instructions follow the full
instructions provided online, this is only
a quick guide.
The Customer is solely responsible for
evaluating and selecting this product
and determine whether this product is
t for a particular purpose and suitable
for customer’s use and application.
When installed properly on a door leaf
manufactured in accordance with SIS
817383 it keeps your home locked and
secure.
Improper installation, alteration of the
product or an act or omission on the part
of customer may cause one or more of
the following; product failures, loss of
property or harm to people.
ID Lock shall not be held responsible for
any special, indirect or consequential
damages which arise from the use and/
or installation of this product.
Only AA batteries (alkalineLR06 batter-
ies, rated 1,5V) must be used. Do not use
rechargeable batteries or mix different
brands/types. Voltage rating is 6VDC.
At least one RFID and User PIN must be
programmed. Do not make changes or
any other alterations on the product and/
or to the product’s software or hardware.
Clean with water and a microber cloth.
Do not use solvents or soap. All moving
parts of mortise lock require greasing
at least once a year to maintain proper
functionality.
Customer must ensure that the product’s
software is maintained through installa-
tion of updates or new versions which
are made available by ID Lock.
QUICK GUIDE
ID LOCK
202
MULTI
Activate panel Key button
door open/unlocked
Start Master PIN *
Change Master PIN 1* New Master PIN *
Position 1-25 *
Position 1-25 *
Position 1-25 # or Delete all 0 #
Position 1-25 # or Delete all 0 #
Activate “Lock when open“ 1
Deactivate “Lock when open“ 3
Activate “ReLock“ 4
Deactivate “ReLock“ 6
Activate “AutoLock“ 7
Deactivate “AutoLock“ 9
Bluetooth ON 1
Z-Wave start inclusion / Zigbee send status to module 1
Z-Wave local reset / Zigbee reset 0
Bluetooth OFF 0
New User PIN #
Show RFID #
Repeat Master PIN #
Add User PIN 3*
Delete User PIN 4*
Add RFID 5*
Delete RFID 6*
Settings 7*
Bluetooth 8*
Modules 9*
ENGLISH
