mundoclima MUPR-H6 Installation instructions

English
CL20015 to CL20018
MUPR-H6
www.mundoclima.com
manual
Installation and owner's
Thank you very muchfor purchasing our products.
Please read thismanual carefully beforeinstalling
and using the unit.
INVERTER SERIE H6

MUPR-H6 All Easy
Thank you for selectiong super quality Air Conditiones. To ensure satisfactory operation for many ears to come,
this manual should be read carefully before the installation and before using the air conditioner. After reading,
store it a safe place. Please refer to the manual for questions on use or in the event that any irregularities occur.
This Air Conditioner should be used for hosehold use.
This unit must be installed by a professional according RD 795/2010, RD 1027/2007 and RD 238/2013.
The power supply must be SINGLE-PHASE (one phase (L) and one neutral (N)) with his grounded power (GND)
and his manual switch. Any breach of these specifications involve a breach of the warranty conditions provided by
the manufacturer.
In line with the company's policy of continual product improvement, the aesthetic and dimensional characteristics,
technical data and accessories of this appliance may be changed without notice.
IMPORTANT
WARNING
NOTE
Read this manual carefully before installind or operating you new air conditioning unit. Make sure to save this
manual for future reference.
ATTENTION
IMPORTANCE NOTICE

Installation manual ................................................. 4
Remote controller manual ................................. 54
CONTENTS
MUPR-H6 All Easy
Owner's manual ............................................ 36

.............................................
Installation Manual
Indoor Unit Installation ...... 13
1. Select installation location ......................... 13
2. Attach mounting plate to wall ................ 14
3. Drill wall hole for connective piping ...... 14
4. Prepare refrigerant piping ......................... 16
5. Connect drain hose ..................................... 18
6. Connect signal cable .................................. 19
7. Wrap piping and cables ........................... 21
218. Mount indoor unit .....................................
Outdoor Unit Installation .. 22
10
1. Select installation location ............... 22
2. Install drain joint ................................. 23
3. Anchor outdoor unit ......................... 24
4. Connect signal and power cables .. 25
Safety Precautions .......................... 6
0
1
5
Accessories ..................................... 8
2
4
Unit Parts ........................................12
3
Installation Summary - Indoor Unit ......
4

Refrigerant Piping Connection ........ 27
A. Pipe Length and additional charge ................................... 27
B. Connection Instructions –Refrigerant Piping ............... 27
1. Cut pipe ............................................................................... 27
2. Remove burrs ..................................................................... 28
3. Flare pipe ends ................................................................. 28
4. Connect pipes .................................................................... 29
Air Evacuation ....................... 31
1. Evacuation Instructions .......................... 31
Electrical and Gas Leak Checks ......... 33
Test Run .................................................... 34
6
7
8
9
MC MC
5

This symbol indicates that ignoring instructions may cause death or serious
injury.
This symbol indicates that ignoring instructions may cause moderate injury
to your person, or damage to your unit or other property.
Safety Precautions
Read Safety Precautions Before Installation
Incorrect installation due to ignoring instructions can cause serious damage or injury.
The seriousness of potential damage or injuries is classified as either a WARNING or CAUTION.
WARNING
CAUTION
WARNING
Do not modify the length of the power supply cord or use an extension cord to power the unit.
Do not share the electrical outlet with other appliances. Improper or insufficient power supply
can cause fire or electrical shock.
When connecting refrigerant piping, do not let substances or gases other than the specified
refrigerant enter the unit. The presence of other gases or substances will lower the unit’s capacity,
and can cause abnormally high pressure in the refrigeration cycle. This can cause explosion and
injury.
Do not allow children to play with the air conditioner. Children must be supervised around the
unit at all times.
1. Installation must be performed by an authorized dealer or specialist. Defective installation can
cause water leakage, electrical shock, or fire.
2. Installation must be performed according to the installation instructions. Improper installation can
cause water leakage, electrical shock, or fire.
(This unit must be installed by a professional according RD 795/2010, RD 1027/2007 and RD 238/2013)
3.
Contact an authorized service technician for repair or maintenance of this unit.
4. Only use the included accessories, parts, and specified parts for installation. Using non-standard
parts can cause water leakage, electrical shock, fire, and can cause the unit to fail.
5. Install the unit in a firm location that can support the unit’s weight. If the chosen location cannot
support the unit’s weight, or the installation is not done properly, the unit may drop and cause
serious injury and damage.
This symbol indicates that you must never perform the action indicated.
6

WARNING
6. For all electrical work, follow all local and national wiring standards, regulations, and the
Installation Manual. You must use an independent circuit and single outlet to supply power. Do
not connect other appliances to the same outlet. Insufficient electrical capacity or defects in
electrical work can cause electrical shock or fire.
7. For all electrical work, use the specified cables. Connect cables tightly, and clamp them securely to
prevent external forces from damaging the terminal. Improper electrical connections can overheat
and cause fire, and may also cause shock.
8.
9.
All wiring must be properly arranged to ensure that the control board cover can close properly. If
the control board cover is not closed properly, it can lead to corrosion and cause the connection
points on the terminal to heat up, catch fire, or cause electrical shock.
In certain functional environments, such as kitchens, server rooms, etc., the use of specially designed
air-conditioning units is highly recommended.
CAUTION
Do not install the unit in a location that may be exposed to combustible gas leaks. If combustible
gas accumulates around the unit, it may cause fire.
Do not operate your air conditioner in a wet room such as a bathroom or laundry room. Too
much exposure to water can cause electrical components to short circuit.
1. The product must be properly grounded at the time of installation, or electrical shock may occur.
2. Install drainage piping according to the instructions in this manual. Improper drainage may cause
water damage to your home and property.
Note about Fluorinated Gasses
1. This air-conditioning unit contains fluorinated gasses. For specific information on the type of gas
and the amount, please refer to the relevant label on the unit itself.
2. Installation, service, maintenance and repair of this unit must be performed by a certified
technician.
3. Product uninstallation and recycling must be performed by a certified technician.
4. If the system has a leak-detection system installed, it must be checked for leaks at least every 12
months.
5. When the unit is checked for leaks, proper record-keeping of all checks is strongly
recommended.
7

Name
Shape Quantity
1
1
1
Clip anchor
Mounting plate fixing
screw ST3.9 X 25
Remote controller
Fixing screw for remote
controller holder ST2.9 x 10
Remote controller holder
Dry battery AAA.LR03
Seal
Drain joint
Mounting plate
1
The air conditioning system comes with the following accessories. Use all of the installation parts and
accessories to install the air conditioner. Improper installation may result in water leakage, electrical shock
and fire, or cause the equipment to fail.
5
5
2
1
2
8
ACCESORIES

1
Name Shape Quantity
9
Installation and Owner's
manual
English
CL20015to CL20018
MUPR-H6
INVERTER SERIE H6 - ALL EASY
www.mundoclima.com
manual
Installation and owner's

Select Installation Location
(Page 11)
Attach Mounting Plate
(Page 12)
Drill Wall Hole
(Page 12)
2
Installation
Overview
Determine Wall Hole Position
(Page 12)
12
3 4
120 mm
2300 mm
120 mm
150 mm
10
INSTALLATION SUMMARY -
INDOOR UNIT