MuscleSquad 8 Pair A-Frame Dumbbell Rack Use and care manual

MuscleSquad 8 PairA-Frame Dumbbell Rack
Assembly & User Manual
Important –Please read these instructions fully before assembly and use.
These Instructions contain important information for assembly, safe use, and maintenance.

1
1
Contents
Safety Information 1
Hardware 2
Assembly Instructions 3-4
Exploded Diagram 5
Parts List 6
Guarantee 7

Safety Information
This exercise equipment is built for optimum safety. However, certain precautions apply whenever you
operate a piece of exercise equipment. Be sure to read the entire manual before you assemble,
operate or use this equipment. In particular, note the following safety precaution.
Assembly
•Check you have all the components and tools
• Remove all fittings from the plastic bags and
separate them into their groups.
• Keep children and animals away from the work
area, small parts can cause choking if swallowed.
•Make sure you have enough space to layout the
parts before starting.
•The assembly of this equipment is best carried out
by 2 people.
• Assemble the item as close to its final position (in
the same room) as possible.
• Position the equipment on a clear, level surface.
• Dispose of all packaging carefully and responsibly.
Using
•Do not use the equipment near water or outdoors.
• Keep children and pets away from the equipment
at all times. Do not leave children unattended in the
same room with the equipment.
• Before using the equipment to exercise, always
warm up with stretching exercise.
•This product is intended for domestic use only.
•If the user experiences dizziness, nausea, chest
pain or any other abnormal symptoms STOP the
workout at once.
CONSULT A DOCTOR IMMEDIATELY
•Only one person at a time should use the
equipment.
• Keep hands away from all moving parts.
• Always wear appropriate workout clothing when
exercising. Do not wear loose flowing clothing that
could become caught in the equipment.
Running or aerobic shoes are also required when
using the equipment.
•Use the equipment only for intended use, as
described in this manual. Do not use attachments
not recommended by the manufacturer.
•Do not place any sharp objects on or near the
equipment.
•Disabled persons should not use the equipment
without a qualified person or doctor in attendance.
•Never operate or use the equipment if it is
damaged or not functioning properly.
•Examine the equipment frequently especially the
easily damaged parts. The safety level of the
equipment can only remain if it is examined
regularly. Replace any defective components
immediately. Do not use the equipment until it has
been repaired.
•Parents and others responsible for children must
be aware that playing on the equipment could be
dangerous and lead to possible injury. Children
must not be left unattended with the equipment.
•A spotter is recommended during exercise.
•Maximum capacity : 300kgs
•Your product is intended for use in clean dry
conditions. You should avoid storage in excessively
cold or damp places as this may lead to corrosion
and other related problems that are outside our
control.
•This product conforms to: (BS EN ISO 20957)
- PARTS 1 class (H) - Home Use - Class (C).
This product is not suitable for therapeutic purposes.
•This exercise product has been designed and
manufactured to comply with the latest (BS EN
ISO 20957) British and European Safety Standard.
Important –Please read fully before assembly or use
1

Hardware
2

Assembly Instructions
Step 1
Attached two Base Stabilizers (#7) to each side the Center Cross Base (#6), Aline the
holes and secure each of them with two M10x60mm Allen Bolts (#9), four ¢10mm
Washers (#5) and two M10 Aircraft Nuts (#8).
3

Assembly Instructions
Step 2
Connect the two Dumbbell Holders (#4) to the two Base Stabilizers (#7), Aline the hole and
secure each of them with two M10x16mm Allen Bolts(#10) , Four ¢10mm Washers (#5) and
two M10 Aircraft Nuts (#8).
Attach the Connect Bracket (#1) to the top side of two Dumbbell Holders (#4), Aline the
holes and secure each of them with two M10x16mm Allen Bolts(#10) , Four ¢10mm
Washers (# 5) and two M10 Aircraft Nuts (#8).
.
4

Exploded Diagram
5

Parts List
key No.
Description
QTY
key No.
Description
QTY
1
Connect Bracket
1
6
Center Cross Base
1
2
Rubber Sheet
32
7
Base Stabilizer
2
3
Rubber Foot
4
8
M10 Aircraft Nut
12
4
Dumbbell Holder
2
9
M10x60mm Allen Bolt
4
5
¢10mm Washer
24
19
M10x16mm Allen Bolt
8
6

Guarantee
Product Guarantee
This product is guaranteed against manufacturing defects for a period of 12 Months.
This product is guaranteed for twelve months from the date of original
purchase. Any defect that arises due to faulty materials or workmanship will
either be replaced, refunded or repaired free of charge where possible, during
this period by the dealer from whom you purchased the unit.
The guarantee is subject to the following provisions:
•The guarantee does not cover accidental damage, misuse, cabinet parts,
knobs or consumable items.
•The product must be correctly installed and operated in accordance with the
instructions contained in this manual.
•It must be used solely for domestic purpose.
•The guarantee will be rendered invalid if the product is re-sold or has been
damaged by an inexpert repair.
•Specifications are subject to change without notice.
•The manufacturer disclaims any liability for any incidental or consequential
damages.
•The guarantee is in addition to and does not diminish your statutory or legal
rights.
7