Music Man BT-X26 User manual

MusicMan® * User Manual
Bluetooth LED Light Soundstation BT-X26
This device complies with the requirements of the standards referred to the Directive R&TTE
999/5/EC. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom
“Konformitätser lärung”). Before using the device the first time, read the user manual carefully.
This device has a rechargeable battery. It must be fully charged before first use.
NOTE: Charge the battery of the device every 2–3 month if it is not used!
Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line
and 42 cent/minute from mobile networ s). Free Email: [email protected]
Features
 Music transfer through Bluetooth V4.0 with transmitting distance ~10m  Ma e phone
calls wireless via Bluetooth (hands-free function)  6 different light effects selectable 
AUX–IN mode  High capacity rechargeable battery with 2000mAh ensures long music
enjoyment  Supports mobile phones/ Smartphones, PC, Tablets, MP3, etc.  Ideal for
use at home, at parties or while travelling  Trendy design with handy size for easy
transport
Technical Specifications
Bluetooth Bluetooth V4.0 / Transmitting distance ~10m (open range)
Function MicroSD Card (32GB), AUX–IN , Bluetooth, Hands-free, LED
Built-in spea ers 2x 4W stereo sound with Ø 45mm
Frequency range 150Hz – 18 Hz
Audio input AUX–IN 1x 3.5mm
Power input DC 5V
SNR / Spea er impedance ≦ 80dB / 4 Ω
Power supply Built-in rechargeable 2000mAh lithium battery 3.7V
Charging time ~2–3 hours
Playing time (fully charged)
~5 hours (medium volume + LED)
~3.5 hours (max. volume + LED)
~8 hours (medium volume without LED)
Standby time ~35 hours
Material PC + ABS plastic
Weight / Dimensions 415g / (L) 18.8 x (W) 8.0 x (H) 6.8cm
Pac age Contents MusicMan® Bluetooth LED Light Soundstation BT-X26,
Micro USB charging cable, AUX–IN cable, User Manual

. Charging
Before first use, fully load the battery with the included original Micro USB charging cable.
Plug the charging cable into the Micro USB slot of the spea er, and the other end into a
USB slot of PC or USB slot of a charger* (5V/500mA, *not included). The RED LED
indicates the charging of the spea er. When the spea er is fully charged, the RED LED
turns off. (We recommend to turn off the spea er while charging, otherwise it will ta e a
longer time.) Charge the speaker at least 3 hours before first use and charge the
battery of the speaker every 2–3 month, when not used!
Note: Spea er says when battery is about 5%–10% and turns down the volume to extend
the wor ing time. Depending on use, the spea er turns itself off after it has said “Battery
Low”. If the device turns off automatically, turn it bac on and it will play music for several
minutes. Please charge in time to be free from power soc et.
2. Buttons & Functions

①Spea er ② Microphone
③Forth/Volume up: Short press to move to next trac . Long press to increase
volume. (max. volume)
④Play/Pause/Mode: Short press to play or pause. Under Bluetooth mode, to receive
incoming calls. Long press to change from Bluetooth to MicroSD card or AUX.
Under Bluetooth mode, to reject incoming calls.
⑤Charging indicator
⑥Light show controller: Short press to transfer light show mode (it can display 6
different light show modes). Long press to turn on/off LEDs.
⑦Wor ing indicator
⑧Back/Volume down: Short press to go bac to last trac . Long press to decrease
volume.
⑨Power on/off: Keep pressing the ey 2 seconds to turn on/off the spea er. The
BLUE LED is shining when the spea er is under power.
⑩Micro USB charging connector ⑪ AUX connector
⑫MicroSD card slot ⑬ PVC protection grid
3. Bluetooth Mode
Turn on spea er. Bluetooth wor s spontaneously, searching previous pairing Bluetooth set.
If the spea er fails to lin , it starts pairing other Bluetooth devices. In this case, turn on
your Bluetooth device to search the spea er. Bluetooth pairing name “MusicMan BT-
X26”. Music streams after pairing successfully. The BLUE LED is flashing fast when no
Bluetooth device is connected. If there is a Bluetooth device connected to the BT-X26, the
BLUE LED shines continuous. The BLUE LED starts flashing slowly when music is going
to be played.
4. MicroSD card Mode
Turn on the spea er, plug in MicroSD card in the slot. Music playbac starts automatically.
Press the ey to play/pause. Press the ey ／／ to go bac to last trac or
decrease volume; press the ey ／／ to move on to next trac or increase volume.
5. AUX Mode
Plug one end of 3.5mm AUX cable into the AUX slot of the spea er, and plug the other end
into the audio slot of your mobile phone, Smartphone, Noteboo , Tablet PC, MP3 Player
etc. The spea er switches to the AUX mode automatically.

6. Hands-free function
Your Bluetooth device (e.g. mobile phone) is connected with the BT-X26. When there is an
incoming call, you can short press to accept the call. To hang up the call, short press
the button again. To reject the call long press the button longer than 2
seconds.
7. Light Show
The Soundstation supports 6 different light show modes. By pressing the button ⑥ short
you can switch between the different modes. By long pressing the button ⑥ the light show
can be turned off or on.
Warnings
 If the spea er does not turn on after switching it on, or it turns off after turning it on, chec
whether the battery is fully charged. If it is OFF power, get it fully charged and try again later.
(We suggest charging the spea er once a wee if it is not used for a long time.)  Only
charge the speaker through the DC 5V Micro USB port by using the provided original
Micro USB charging cable. You also can use an USB charging adapter but ONLY (!) up
to DC 5V/500mA. Do not (!) charge the speaker with more power!  When the spea er
wor s under AUX–IN mode, do not (!) increase the volume of your mobile phone, PC,
MP3/MP4 Player, CD, DVD etc. to a large extend. A sound distortion may occur. In that case,
decrease volume either of mobile phone, PC, MP3/MP4 Player, CD, DVD or the spea er. The
sound gets normal soon.  If the spea er fails to lin to your mobile device or if it fails to play
music after being connected, the user shall chec if your mobile device supports A2DP.  Do
not attempt to disassemble the spea er, it may result in short-circuit or even damage.  Do
not drop or sha e the spea er, it may brea internal circuit boards or mechanics.  Keep the
spea er in dry and ventilated environment. Avoid high humidity and high temperature. Also
batteries should not be exposed to excessive heat or direct sunlight.  This spea er is not
water resistant; therefore eep it away from moisture.  Keep the spea er away from little
children.
Security and Disposal Hints for Batteries: Hold children off batteries. When a child
swallowed a battery go to a doctors place or bring the child into a hospital promptly! Loo
for the right polarity (+) and (--) of batteries! Always change all batteries. Never use old
and new batteries or batteries of different types together. Never short, open, deform or
load up batteries! Risk of injury! Never throw batteries into fire! Risk of explosion!
Hints for Environment Protection: Pac ages materials are raw materials and can be

recycled. Do not disposal old devices or batteries into the domestic waste. Cleaning:
Protect the device from contamination and pollution (use clean drapery). Avoid using
rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device
accurately. Important Notice: Should battery fluid lea from a battery, wipe the battery
case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr.
105, 60388 Fran furt a.M., Germany