
Suns tt r Bag 13323 Studd d
13319 No Studs
Parts Included:
1 Sunsetter Bag
1 Rain Cover
1 Shoulder Strap
1 Y-Strap
2 Adjustable Straps with Hooks
2 8" x 1" Hook and Loop Straps
1 Installation Instructions
In order to protect you and others from possible injury and/or property damage or loss,
please carefully read all instructions, warnings and attention notes regarding the use
and care of this product.
ATTENTION: IG ORI G WAR I G OTES DESCRIBED HEREI CA RESULT I POTE TIAL
DEATH, SERIOUS I JURY OR MATERIAL DAMAGE A D MAY EGATIVELY AFFECT
PRODUCT PERFORMA CE A D FU CTIO ALITY.
Strictly observe the following guidelines in order to use the product properly
and avoid potentially dangerous accidents.
CAUTION! Never exceed the manufacturer’s recommended load ca acity. Excess loading
on the luggage rack could cause damage to your motorcycle, loss or injury. Mustang is not
res onsible for damage, loss or injury caused by exceeding the manufacturer’s load ca acity.
FOR MOUNTING/SECURING TO PASSENGER BACKREST
STEP 1 Read and understand all steps in the instructions before starting the installation.
Park the motorcycle on a hard, level surface and turn off the ignition.
STEP 2 To install the Sunsetter bag on a backrest, install the Y-strap as shown in PIC. 1.
STEP 3 Place the Y-strap over the backrest and insert it through the lower D-ring, secur-
ing the hook and loop as shown in PIC. 2.
STEP 4 Use the 8” straps and secure the bag around the arms of the backrest using the
lower D-rings as shown in PIC. 3.
STEP 5 If the backrest has a luggage rack, you also may use the additional straps on the
front of the bag under the ap for additional security.
- Continued -