mychway SR-9902 User manual

SR-9902 USER MANUAL
I Beofre Operation
1 Please connect the USB charging line with the charging hole of the charging stand, then please
make the charging stand connect with the power supply
2 The indication ED of charging stand will be red if connection is well,please make the main

device Insert into the charging socket,the LCD of the main device will be off after full, 3 hours
needed to be charged each time
3 Clean skin and put some essential on skin
II Operation
4 Take the main device, press “POWER” ,the 9 LEDs of LED pannel will be on, default electrical
level will be 1 level
5 There is 1-5 electrical levels, bigger number, more stronger electric levels
6 How to set electrical levels
Press “POWER” one time, 1 level (default)
Press "POWER” double, 2 level
Press "POWER” three times,s 3 level
Press "POWER” four times, 4 level
Press "POWER” five times, 5 level
6 Please move the device on skin from down to up, inner to outside, you will feel some warm on
skin, it is more better to use some essential with this device, 2 times/week recommendation
III How to use LED function
Mode1
Press LED SEL. ,Red light
Mode2
Press LED SEL twice, Green light
Mode3
Press LED SEL three times,, Blue light
Mode4
Press LED SEL four times, Yellow light
Mode5
Press LED SEL five times, Pink light
Mode6
Press LED SEL six times, Pink light flash
IV Parameters
Output voltage: DC5V
Charging time:3 hours
Power of charging:2.5W
Consumption:MAX 10W
Standby time: 40 days
Capacity of battery: 850mAh
Working duration: 10 minutes
N.W:80g
Size: 165*45*46mm
Package size: 200*152*85mm