MYDLINK DCS-8300LHV2 User manual

What's in the Box
Quick Installation Guide
Full HD Wi-Fi Camera
DCS-8300LHV2
MicroUSB Power AdapterFull HD Wi-Fi Camera
(DCS-8300LHV2)
Mounting Hardware Quick Installation Guide
This is a backup of your device’s
Setup Code. Please keep it as future
reference for your device.
Setup Code
Connected to network and mydlink
Booting up
Ready for setup
Firmware being updated - do not power off
LED Behavior
Simple Setup
Get the mydlink app on the App
Store or on Google Play. Launch the
app, then Sign In or Create a New
Account.
1
2Power on the device and wait for
the Status LED to flash orange.
Note: Make sure that your mobile device’s
Bluetooth is on.
3Place your device next to your
mobile device. A prompt will appear
- tap Add Device, then follow the
app instructions.
mydlink
Note: Please set up your device before mounting it.
Status LED
Note: If not automatically prompted
within 30 seconds, tap then tap
Add Device.

FAQ
What do I do if my device is not working properly?
Reset and reinstall your device. Use a paper clip to press
the recessed Reset button and the LED will turn solid red.
During installation, ensure that:
• Your router is connected to the Internet and Wi-Fi
is enabled
• Your mobile device is connected to your router’s
Wi-Fi and Bluetooth is enabled
• Your mydlink device is in range of your Wi-Fi network
How can I use voice commands to control my device?
The device will work with both Amazon Alexa and the
Google Assistant. For setup instructions on these services,
visit the following websites:
Amazon Alexa The Google Assistant:
dlink.com/en/alexa dlink.com/en/google-assistant
Why is my microSD card not working/not supported?
The microSD card must be formatted into the correct file
system (FAT32) before it can be used with this product. This
can be done in the mydlink app by selecting the Format
function in the storage menu under the device settings.
What is my username and password for setting up my
device with an ONVIF system?
To connect your device to an ONVIF system, key in“admin”
as the username and use the PIN code of your mydlink
device as the password. You can find the PIN code on your
device’s label.
Need Help?
2020/11/11 Ver 1.00(US)_90x130
To get the most out of your camera’s view and features, please take the following placement guidelines
into consideration.
Height: Place the camera 1.5 - 2 meters (4 to 6.5 feet) from the ground.
Person Detection: Person Detection works best when the subject is between 2 to 5 meters (6.5 - 16
feet) away from the camera.
Turn the mounting bracket
anticlockwise to release it
from the device.
Align the mounting bracket
so that the arrow is pointing
up. Use a pencil to make
marks in the two holes.
Use a 6 mm drill bit to drill
two 26 mm deep holes over
the pencil marks.
Hammer in the plastic anchors
to support the screws.
Align the mounting bracket’s
holes over the plastic
anchors. Drive the screws
into the anchors to secure
the mounting bracket.
Adjust your camera via its tilt
and rotation options until
you’re satisfied with the view
point.
Mounting
Align the camera using the
grey dots then twist the
camera clockwise onto the
mounting bracket until it
securely locks into place.
The device can be mounted on a wall or on
the ceiling.
1.5 - 2 m
(4 - 6.5 ft)
Ideal Viewing Distance: 2 - 5 m (6.5 - 16 ft)
2 m (6.5 ft)
Placement
Having trouble installing your new product? D-Link’s
website contains the latest user documentation and
software updates for D-Link products. Customers can
contact D-Link Technical Support through our website
by choosing the relevant region.
United States
Website: http://support.dlink.com
Telephone: [phone]