Nagasaki PPC-3012PT User manual

-
1
-
PPC-3012PT
30”Touch Panel PC with TV Tuner
User’s Manual

-
2
-
COPYRIGHT©
All rights reserved. The information contained in this guide has been validated
and reviewed for accuracy. No patent liability is assumed with respect to the use
of the information contained herein. While every precaution has been taken in
the preparation of this guide, the Manufacturer assumes no responsibility for
errors or omissions.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of the Manufacturer.
Manufacturer reserves the right to modify or improve the specifications without
prior notice.
TRADEMARK™
NAGASAKI®is a registered trademark of Nagasaki IPC Technology Corporation.
Intel®, Pentium®and MMX®are registered trademarks of Intel®Corporation.
Microsoft®and Windows®are registered trademarks of Microsoft Corporation.
All products and company names are trademarks or registered trademarks of their
respective holders.
These specifications are subject to change without notice.

-
3
-
CONTENTS
SECTION 1 INTRODUCTION
1.1 INTRODUCTION ……………………………………………. 4
1.2 Pictures of PPC-3012PT…………....………………….……….. 5
1.3 Dimensions ……………………………………………………….. 5
1.4 I/O Ports …………………………………………………………….. 5
1.5 Power Adapter and Optional Accessories ………………………. 6
1.6 Main board used in PPC-3012PT………..….……………..…. 6
1.7 Specifications ………………………………………………………... 7
SECTION 2 TOUCH SCREEN
2.1 How To Load Windows O.S. ………………………………… … … 7
SECTION 3 TV BOX
3.1 TV Multimedia Box …….………………..………………………..... 8
3.2 Remote Controller ……..……………………………………….…... 8
3.3 Remote Control Precaution & Usage …………………………….. 9
3.4 Power On / Off ………………………………………………………. 10
SECTION 4 BASIC OPERATION
4.1 During Normal Operation .……………………………………...... 10
4.2 In Menu Mode ……………………………………………………… 11
4.3 Select Display / Audio Source ……………………………………. 11
4.4 OSD Set Up
SECTION 5 TROUBLE SHOOTING
5.1 Trouble Shooting …………….…………………….…………….. 12
5.2 Specifications of TV Tuner ………………………………………… 12

-
4
-
I. INTRODUCTION
First of all, we wish to thank you for your patronage and for purchasing our product. Our
products incorporate a variety of special features and advanced designs, yet we are able to
offer very cost-effective products and solutions. We believe that we can provide not only
the best technology and advanced products, but also the lowest cost products compared to
other similar products. For a complete view of our products and solutions, pleasevisitour
website or discuss with our dealer or see the various models on this driver CD or User’s
manual booklet.
This product manual contains a variety of technical information to help you to use or install
the product. The manual contains the technical specification, port connectors, diagrams of
the board or unit and its various areas, jumper settings, and many other useful areas.
Please refer to the manual for details about each specific product. The manual also
includes some general idea about special features, software options, and some basic
troubleshooting ideas to help you in these areas.
This Panel PC is widely used in all kinds of applications includingKiosk, factoryautomation,
HMI (Human-Machine-Interface), hotel, restaurant, home, banking(e.g.ATM), 7-11,POS,
POI, super markets, medical, military, food, mining, airport, school, building, vehicles,
telecommunications,… and so on. Whenever the customer has any special requirement,
we are very pleased to custom design for them at a much competitive pricing and within
the average 4 weeks delivery time.
We are able to custom design the all-in-one or separate Panel PC from a very small 6.4”,
7”, 8”, 10.4”, 12.1”, 15”, 17”, 19”, 20”, 21”, 23”, 30”, all the way up to the largest 40” as per
the customer’s required specifications including in the very cold weather and a higher
temperature or in a very harsh environment with dirty, humid, full of particles in the air, etc.
Pleasecontact our distributors for further details.

-
5
-
1.2 Pictures of PPC-3012PT
OSD buttons
1.3 Dimensions :
1.4 CD-ROM, FDD, 6-in-1 Card Reader

-
6
-
1.5Specifications :
Model No. PPC-3012PT
Housing Made by 2.0mm rugged steel construction
IP & NEMA Meets IP-56, NEMA-12 on front
Color Silver color is standard. Blackcolor is optional at your request
Wall-mount 4 xVESA-75 wall mount holes
LCD specs. 30”TFT LCD display, high bright 400 cd/m2, 500:1 contrast ratio
1280x 768wide screen resolution, 16.77 million colors, 50,000 hours Wide
View Angle : 170 degree
Touch screen Resistive touch screen, 2048 x 2048 resolution
Speaker Built in 2 high output 10 watts speaker on each side
CPU Processor INTEL CELERON 2.4 GHz CPU as standard
System RAM Support maximum2GB DDR RAM. Standard is 512MB.
System Chipset ATI 9200as north bridge and SiS962L as south bridge.
HDD Standard is 40GB HDD. 60, 80, 120, 160GB are optional for request.
VGA Support second monitor
Video RAM Built in 64MB RAM for 3D / 2D high speed graphics acceleration
AGP Support 4X, 8X AGP speed
Video Memory Support 16M, 32M, 64M share memory. Default is 32 or 64M.
Direct X SupportDirectX on versions 8.0, 8.1, and 9.0.
LAN One 100/10 Mbps Ethernets support networking
CD-ROM One CD-ROM , 52x Speed
FDD One 1.44MB FDD built in
6-iin-1 Card
Reader One 6-in-1 Flash Card Reader built in supporting : -CF card (CF-I, CF-II),
-Memory Stick (MS),
-SM (Smart Media),
-SD (Smart Disk),
-MMC
-MD (Micro Drive)
TV Tuner
Remote control
TV Tuner built in supporting NTSC system for U.S., Taiwan, Japan
Optional PAL systems for European countries
1 x Remote control keypad
HDTV Support high definition TV on 480p, 480i, 720p, 1080i
USB 2.0 2x USB 2.0
Serial port 2x RS232 serial ports
Keyboard 1 x PS2 type keyboard port
Mouse 1 x PS2 type mouse port
Printer port 1 x LPT port for printer interface
Game port 1 x game port

-
7
-
PCI expansion
slot 1 x PCI slot for future expansion purpose
PCI ver. 2.2 Support PCI version 2.2
PCI IDE port SupportATA-100 x 2 up to 4 devices
Audio jack Support external speaker or microphone function
Vibrationresistant
Meet strict vibration test from 5 –500 Hz at 1.5G RMS under Windows XP
Pro.
Shock resistant Passed strictshock testfrom 10G for 11ms duration under Windows XP
Pro.
Power supply Dual power supplies supporting PC system and TV system
Standard AC 100-240V power adapter.
Dimensions See the above drawing
Operating
temperature From 0 to 40 degree C at an air ventilation area
SECTION 2 TOUCH PANEL
4 Wire analog Resistive Touch screen.

-
8
-
SECTION 3 TV TUNER and TV Multimedia Box
3.1 TV Multimedia Box and Its Connectors
1) Audio input1, Video S-video input
2) Audio input2, Video S-video input
3) HDTV/ Component Input: for high definition TVsignals
4) Audio Out: For external Home Theater / Audio system
5) ANT:Connector for TV cable /Antenna
6) Audio In : connects to PC for Audio output
7) RGB : D-Sub 15pin connect to PC
Multimedia Box Features
NICAMAudio Surround Sound
S-Video 2 Sets
Composite / AV 2 Sets
YPbPr / YCbCr 1 Set
VGA Audio Input 1 Set
External Connector
Audio Output 1 Set

-
9
-
3.5 Remote Control

-
10
-
1) Power
2) Menu :To show all the functions except in AV or PC mode.
3) Source : Switch to TV/PC/Video mode.
4) Volume :Volume up (+), Volume down (-).
5) Channel : ? for higher frequencies, ? for lower frequencies
6) Adjustment keys : Using Up, Down, Left and Right to adjust functions.
7) Recall : Back to previous channel or last selected function from menu page.
8) Enter :Confirm your selections
9) Favorite : press 8to memorise your favorite channels, then use9to select
memorized favorite channels.
10) Sleep Timer : Setup sleep mode for auto switch off.
11) Main/SubAudio : Switch to Normal sound, Surround sound or NICAM.
12) Mute : Press once toturn off sound, and press again to turn it back on.
13) Number keys : To select favorite channels instantly.
14) Display: To Show the current channel number and audio mode.
15) Memory: can set 8 favorite channels of yours.
16) Swap : Swap the main picture and the PIP picture
17) PIP : switch on /off PIP (Picture in picture) functions and 3 different PIP modes.
18) Mode : switch between 4:3 and 16:9 display mode
3.3 Remote Control Precaution and Usage
♦Control distance would be shorter as the TV receiver facing a strong light.
♦Any impact should be avoided.
♦Humidity and high temperature should be avoided.
♦Remove battery from Remote Control when it is not in use for a longer time.
♦Transmitter should point directly to the TV receiver.
3.4 Power On/Off
1) Red light on after power cable has plugged in.

-
11
-
2) Press Power button, red light turns green. Display appears in 3 seconds.
3) Press Power ?
1button again to switch off TV. Green light turns red and display off.
Warning: Electrical currents may still remain in the TV after power off. Unplug the
power cord if you intend not using TV for a long period.
SECTION 4 BASIC OPERATION
4.1 During Normal Operation
Press Channel5??button to select TV channels
Press Volume4+ or -button to adjust the Audio volume
4.2 In Menu Mode
1. Press Menu2button as ENTER /EXIT
2. Press Channel 5??button to select specific function for adjustment
3. Press Enter 8button on the Remote Control (or Source3button on Control Pad)
as SELECT.
Note: You will be using these buttons all the time to make any adjustment.
4.3 Select Display/Audio Source
1) Press Source 3button to switching among input sources.
2) Displays orders: PCbCr/YPbPr ? S-Video 2 ? S-Video 1 ? Video 2 ?
Video 1 ? TV ? RGB(PC mode)
3) Press Menu 2button to set up TV displays, Languages and other
settings … etc
Note: The system can not display TV signal and Video1/S-Video1 signal at

-
12
-
the same time.
4.4 OSD Setup
Main Video Adjustment
1. Press Menu 2button to enter menu page
2. Press Channel 5??button to select specific function for adjustment
3. Press Enter 8button on the Remote Control (or Source 3button on
Control Pad) to confirm to enter menu page. Then Select Contrast,
Brightness, Saturation, Hue, Sharpness for further adjustments.
Example: Contrast Adjustment:
Press Channel 5??button to select Contrast, then press 8button on
the Remote Control (or Source 3button on Control Pad), then Press
Channel 5??button to adjust. Press Menu 2button to return to the
menu.
SECTION 5 TROUBLE SHOOTING
5.1 Trouble Shooting Checklist
No Picture & No Sound ♦Check whether the monitor is turned on
♦Power cord inserted into wall outlet?
♦Plug another product’s power cord into the wall
outlet where the monitor’s power cord was
plugged in.
Picture OK but No Sound ♦Press Volume ＞button
♦Sound muted? PressMute button
The remote control doesn’t
work ♦Check if there is any obstruction between monitor and remote control
♦Check if the batteries are installed correctly
♦Check if the batteries still have power
No/Poor color or Poor Picture
Quality ♦Adjust the color balance in menu ♦Increase the distance between monitor and other

-
13
-
interference
♦Activate any function to restore the brightness of
the picture
Horizontal/Vertical Bars or
pictureshaking ♦Check for local interference such as an electrical appliance or power tool
Strange sound from inside
the monitor ♦A change in ambient humidity or temperature may result in an unusual noise at the time of
switching off or on of the monitor and does not
indicate a fault with the monitor.
5.2 Specifications of TV Tuner
Model No. PPC-3012PT
Power Supply AC 90–250V / 60 Hz
Remote Control Model R3001
Power Consumption 170 W
LCD ViewArea Approximate 30 inch diagonal
Speaker Output Power 10 watts + 10 watts
VGA Input 1
Note: Manufacturer reserves the right to change /upgrade product features without
prior notice.