nanobebe Smart Warming Bowl User manual

Breastmilk Bottle
Desined to preserve
breastmilk nutrients
Electric Bottle Brush
Ultrasonic vibrations for
thorouh, easy cleanin
Breastmilk Bags and Organizer
Fast thawin for optimal nutrient
preservation
User manual
Microwave Steam Sterilizer
Quickly eliminates 99.9%
of bacteria
Flexy Pacifier
Extra-soft nipple
Lihtweiht & eronomic
Compact Drying Rack
Fast Warmin
Automatic shuto
More from nanobébé
Made in China for
Nutrits Ltd.
P.O. Box 7239
Tel Aviv, Israel 6107121
Visit nanobebe.com to learn more.
Customer service: 1.800.403.0498
Smart
warming bowl
DESIGNED FOR BREASTMILK
Adheres to medical guidelines
for warming breastmilk*
FAST & NON-ELECTRICAL
Warming system with unique geometry
for safe and even warming
N
O
N
-
E
L
E
C
T
R
I
C
A
L
nanobébé’s Smart Warming Bowl is the fastest warming
system on the market and the optimal warming product for
breastmilk. Thanks to its unique geometry, it warms both
nanobébé bottles and breastmilk bags quickly and evenly,
so precious nutrients aren’t destroyed by too much heat.
Simply place the bottle or bag on the bowl’s curved bottom,
fill with warm water, and voilà, your breastmilk will reach the
appropriate feeding temperature promptly.
No electricity, no settings and zero fuss.
• Even warming with nanobébé bottles and breastmilk
storage bags
• Adheres to medical guidelines: breastmilk should be
warmed in a bowl of warm water to prevent overheating
• Optimal warming system for breastmilk
• For quick and even warming at home &
on the go
• BPA and Phthalate free

WARNING!
Failure to follow instructions may cause scalding
-Always place the bottle or ba in the warmin bowl before
fillin the bowl with water.
-Never fill the bowl with water above the line inside of the
warmin bowl.
-Never fill the bowl with boilin water.
-Never heat the bowl in a microwave,in an oven or on a stovetop.
-Before fillin the bowl with water, ensure that it is placed stably
on a flat surface such as a kitchen counter.
-Always check the temperature of milk before ivin your baby
a bottle, by lettin a few drops fall on your skin. Ensure that
the milk is approximately at body temperature.
HOW TO USE YOUR SMART WARMING BOWL
Before usin your Smart Warmin Bowl, please ensure that
you read these instructions carefully. Please save these
instructions for future reference. This product is desined for
use with nanobébé bottles and breastmilk storae bas.
USING THE BOWL TO WARM BOTTLES
1. Remove the storae cap from the bottle and replace it with
a nipple and screw rin. Cover the nipple with a travel cover.
(diaram 1).
2. Place the bottle in the warmer. The bottle’s concave base should
sit on the dome at the bottom of the bowl (diaram 1).
3. Fill the bowl with warm tap water to the indicated line (diaram 2).
4. After 2-3 minutes, remove the bottle from the warmer and
check the temperature of the milk by lettin a few drops fall
on your skin, the inside of your wrist for example. The milk
should be approximately at body temperature. If the milk has
not reached body temperature, hold the bottle by the travel
cover and place it back on the dome in the warmer. After a
minute check the temperature of the milk once more.
Note that the amount of time it takes cold milk to reach
body temperature varies with the quantity of milk and the
temperature of the water in the bowl.
USING THE BOWL TO DEFROST BREASTMILK BAGS
1. Ensure the storae ba you are about to defrost is tihtly
sealed by runnin your finer alon the double zipper.
2. Place the storae ba inside the warmer with the zipper
facin up.
3. Fill the warmer with lukewarm tap water.
4. Remove the ba from the warmer when the frozen breastmilk
has completely thawed. (The time it takes depends on the
temperature of both the milk and the water).
5. If feedin immediately, transfer the milk to a nanobébé
bottle and warm the bottle to body temperature. Thawed
breastmilk can be stored in the fride for up to 24 hours.
Do not refreeze.