NUPEAA Bottle Warmer Active User manual

Bottle Warmer Active
TM
User Manual BPA
Free

How to use ................................. 8
Maintenance and cleaning ...................... 10
One Year Warranty .............................. 12
Parts guide ................................. 5
Adaptors .......................................... 7
Table of contents
Important Information ................................. 3
Contact us ................................. 12

Read all instructions carefully before using your Bottle Warmer Active
For use by adults for intended purposes only. Keep out of the reach of
children.
Please inspect the product before each use and please clean the
product before first use.
Do not use scouring pads, abrasives or solvents for cleaning; they may
damage the appliance and its surface.
To protect against electric shock, do not immerse the warmer base,
cord in water or any liquid.
Do not expose the product to direct sunshine, heat or hot
environment.
Do not place near a hot gas or electric burner, or in a heated oven.
The warming plate may become hot. Do not touch while in use and let
cool before handling.
It is recommended to use 5V/3A charger or 5V/3A power bank.
Do not use this product to heat frozen baby bottles.
Please unplug the product when it is not in use and before cleaning.
Allow warmer to cool before putting on or taking off parts and
cleaning.
Do not charge for a long time in case of fire or other accidents.
When using electrical appliances, basic safety precautions should always be
followed, including the following:
Appliances can still be used by persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
IMPORTANT
www.nupeaa.com
WARNING: Keep out of reach of
children.

Do not operate any appliance with a damaged cord or plug after the
appliance malfunctions or has been damaged in any manner. Return
to Nupeaa main office for examination, repair or adjustment.
For your child’s safety – Ensure the baby bottle contents are at a safe
temperature before feeding.
Do not use any accessories other than those supplied with this
appliance.
Do not use appliance for other than intended use.
Close supervision is necessary when appliance is used near or by
children.
If you have any questions please visit our website www.nupeaa.com
SAVE THESE INSTRUCTIONS
NOTE:
These instructions are to be used as a guide only.
Please note that there are many variables, such as size of the baby bottle,
ambient temperature, and starting temperature of the liquid, which can
impact the speed as well as the final temperature at which this unit warms
the liquid.
Adjustments to the instructions below may be necessary.
Test the temperature of the liquid with a thermometer before feeding
your baby until you are confident with your babies feeding temperature.
The food should not be heated for an extended amount of time.
IMPORTANT
www.nupeaa.com

1
2
3
45
67
8
9
10
Dispenser Cap
Dispenser Nozzle
Dispenser Body
Powder Valve B
Output Controlling Holder
Powder Valve
Shaft
Shaft Seal Ring
Dispenser Base
Release Button
Structure Description
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Formula Dispenser
www.nupeaa.com
fig 1

a
b
2c
3
d
4
Structure Figure
a. Cap
b. Digital Temperature Display
c. Base
d. Charging Cover
e. On/Off Button
f. Heating Plate
g. Silicone Ring
f
e
www.nupeaa.com
Bottle Warmer Base
fig 2
g
4

Baby bottle compatibility/ Adaptors
www.nupeaa.com
Nupeaa Collab
MAM
Dr Browns
Minbie
Tommee Tippee
NUK
Comotomo
Avent
Spectra
Medela
Wide Neck
Narrow Neck
Narrow Neck
Standard Neck
Wide Neck
Narrow Neck
Wide Neck
Standard Neck
Standard Neck
Narrow Neck
✓
✓
✓
Not Required
✓
✓
✓
Not Required
Not Required
✓
Brand Type Adapter Required
Please contact us if your baby bottle is not listed.
First Choice
Remove dispenser cap and
nozzle.
1.
3. Add formula powder into the
dispenser with a scoop.
2.Press the release button to self
lock.
4. Attach the nozzle to
the body.
5.Press the release button
to access powder.
How to use your dispenser
Note: Please
shake the
dispenser gently
before press.
Press and shake
the dispenser
to output
powder

Note: Please use 3A power supply with 3A charge cable
(Original USB cable is 3A cable).
Pour liquid
into your
bottle.
Hold for 2
seconds to
power on.
Press to
select
temperature.
37 40 45
Warmer will
start heating
automatically.
Warmer will
hold
temperature
when complete
for up to 6
hours on full
charge.
Screw the
warmer onto
you bottle
and turn
upside down.
www.nupeaa.com
How to use Bottle Warmer Base
Please visit our YouTube page for tutorials

Unplug the USB cable.
Long press for 2 seconds until power off.
Clean and dry the stainless steel parts.
Uninstall the dispenser cap, body, nozzle and output controlling
parts.
Wash with soapy water or in the dishwasher on the top rack.
Cleaning
Portable Warmer
1.
2.
3.
Note: Do not immerse it in water to clean. Be careful not to lose
sealing ring during cleaning.
Formula Dispenser
1.
2.
Adapters and O-rings: Wash with mild liquid soap and rinse with clear
water. Allow to air-dry. Always replace rings to their proper location
(flat side down). Keep Dust Cover on when not in use to keep heating
plate clean.
De-scale
De-scale your warmer base after every use to ensure residual deposits
are removed from the heating plate and the silicone seal. To de-scale,
mix 0.5oz. (15ml) of white vinegar with 0.5oz. (15ml) of cold water and
pour into the heating plate. Allow liquid to stand in the unit until any
deposits (limescale) have dissolved. Discard liquid and rinse with clear
water, repeat process to remove any residual deposits. NOTE: To
avoid bacteria growth perform process and de-scale daily. Any other
servicing should be performed by an authorized service representative.
Note: You can also use a citric acid based remover to descale. Do not
use other types.
Cleaning/ Descaling
www.nupeaa.com

NUPEAA's Bottle Warmer Active
Model:
Product Size:
Input Voltage:
Max Power:
Battery Capacity:
Storage Capacity:
Output Capacity:
NW:
BW-EGS100
70*70*256mm
5V
24W
5000mAh
150g
On standard scoop (8-10g)
342g
Battery Power Display:
Press power button, the LED indicator on the device helps track
charging status. It will indicate the actual battery remaining. There is
100% power available when 99 displayed.
Low Power Display under working state:
"LO" displayed to warn less than 20% available power, please
charge. When "LO" displayed, it blinks for 6 seconds and then
powers off.
Note: Please charge the warmer with 3A power adapter.
www.nupeaa.com
Battery Power Instructions
Technical Specifications

The speed at which the warmer heats the milk or food will depend on the size of
the bottle or container and the starting temperature of the milk or food
Time in below table is laboratory data. Actual time is different based on different
use environment:
0 10 20 30
60ml
120ml
150ml
180ml
240ml
www.nupeaa.com
Heating Reference Table
4
Please note: These are estimated times based of tests conducted with standard pre-made formula, breast milk &
water. These times may vary depending on the temperature of your liquid prior to heating and the consistency of
your liquid prior to heating.
Estimated time Up to (In Minutes)
8
12
15
20
7
18
22
27
30
Warranty
WARRANTY: This product has 12 months warranty period after the date of
purchase. Please visit www.nupeaa.com to register your warranty.
Nothing in this warranty shall be construed as removing or limiting a consumers
rights in law.
NOTE: This warranty does not cover misuse, abuse, abnormal wear & tear,
negligence, environmental exposure, alteration or accident. Any alteration or
removal of the product invalidates all claims against the manufacture.

You can view our digital
manual at www.nupeaa.com
[e-mail]
Don't Forget to register your
product for our 12 months
warranty at www.nupeaa.com
12
months