NAPCO QuickModem User manual

R
333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, [phone]
For Technical Service, [phone]
Publicly traded on NASDAQ Symbol: NSSC
© NAPCO 2005
Quick-Modem
INSTALLATION INSTRUCTIONS
GENERAL DESCRIPTION
The NAPCO Quick-Modem is a modem which is
fully compatible with the NAPCO Quickloader
PCD3000, PCD2000 and PCD-Windows Quick-
loader V4.54 (or higher) downloader programs.
SPECIFICATIONS
Input Power: 9 VAC, 750-1000mA, 9.8 W (from
supplied AC adapter).
CONNECTION
Connect the Quick-Modem to the J2 connector of
the PCI2000 Interface module using a standard
modem cable (not supplied).
CONFIGURATION
PCD3000, PCD2000 and PCD-Windows Quick-
loader software must be configured as follows for
use with the Quick-Modem:
PCD3000
From the PCD main screen (teal screen with the
large NAPCO logo):
Press Sfor Setup
Press Mfor Modem Setup
Select the StarComm 2400 Data (model
2400E-030) modem
Modem type (Select StarComm 2400 Data
(model 2400E-030) )
port none COM1 COM2 COM3 COM4
(select the Comm port for Quick-Modem)
physical type external internal
carrier detect slow fast
call monitor none connect always
(select preference)
speaker volume 1 2 3 4
(select preference)
Telephone line:
dialing mode rotary TouchTone
dialtone type nonstandard standard
telephone number
dial-out prefix
•Press [ESC]
•Press Xfor EXit
The settings will be checked for errors. If none are
found, a message will display:
[Local Configuration values changed]
Save changes?
•Press [Y] to accept the changes and exit
Setup.
PCD2000
Go to the DOS directory in which PCD2000 is
installed cd\PCD2000 (or the directory name in
which PCD2000 is installed).
•Type SETUP
•Select option ABasic Setup
PCI Module installed? Yes No
WI1066C 5/05
For Technical Assistance, Contact the NAPCO
Toll Free Helpline  [phone]
NAPCO Security Systems, Inc.
333 Bayview Avenue  Amityville, New York 11701
For Sales and Repairs, call Toll Free: [phone]

PCI Module serial port? COM1 COM2 COM3 COM4
(select the Comm port for PCI2000 Interface
module)
Modem installed? Yes No
Modem type? Internal External
Modem serial port? COM1 COM2 COM3 COM4
(select the Comm port for Quick-Modem)
Modem dialing mode? TouchTone Rotary
Monitor call through speaker? Always Connect No
(select preference)
Speaker volume? 1 2 3 4
(select preference)
Modem Model? StarComm 2400 Data
(model 2400E-030)
Dialing Prefix
Display type? RGB/Monochrome LCD/Composite
(select preference)
Time Zone offset (hours) 08
(set time zone - press [F2] for list of settings)
Daylight savings observed Yes No
•Press [ESC]
A dialog box will now pop up with the question: "Is
PCI2000 clicking" and you should hear a clicking
sound coming from the PCI2000.
If you hear the PCI clicking, press [Y]. If not press
[N], and you will see a list of possible causes.
PCD-Windows Quickloader
PCD-Windows Quickloader download software
must be configured as follows for use with the
Quick-Modem:
Click File, Modem Settings to open the Serial
Communication Setup dialog (see image be-
low).
NOTE: Although image below displays "Com 1"
in the Port fields, the Port number may be differ-
ent in your system.
Select a Port to be used with the Quick-Modem.
Enter a Dial-out Prefix (if required) and the Tele-
phone Number. Select a PCI Port from the drop-
down menu.
For Modem Type. select "Napco Quick-
modem - StarComm 2400 Data (Model 2400E-
030)".