Napoleon VECTOR LHD45 User manual

24 Napoleon Road, Barrie, Ontario, Canada L4M 0G8 • 214 Bayview Drive, Barrie, Ontario, Canada L4N 4Y8
Fireplaces, Heating and Cooling: 705-721-1212 • Grills: 705 726-4278 • napoleonproducts.com
Specifications
VECTORTM 45 DIRECT VENT GAS FIREPLACE
39 5/16"
999mm
40 13/16"
1036mm
GAS INLET
10 1/8"
257mm
19 7/8"
505mm
18 7/8"
479mm
46 1/4"
1175mm
34 1/16"
865mm
Ø
7"
178mm
Ø
4"
102mm
17 13/16"
452mm
7 1/2"
191mm
SAFETY BARRIER
Overview
Dimensions
Model BTU Width Height Depth Glass
Actual Framing Actual Framing Actual Framing
LHD45 24,000 46 1/4 46 3/4 40 13/16 41 1/4 19 7/8 20 1/8 17 13/16 x 40 7/8
Mantel, see
“MINIMUM
MANTEL
CLEARANCES”
section.
Enclosures, see the section “MINIMUM
CLEARANCES TO COMBUSTIBLE
ENCLOSURES” section for drywall (or
other combustible material).
Framing, see
“FRAMING”
section.
Side Wall
Venting, see
“VENTING” section.
Framing, see
“FRAMING”
section.
Enclosures, see
the section
“MINIMUM
CLEARANCE TO
COMBUSTIBLE
ENCLOSURES”
section for
non-combustible
materials such as
tile, marble,
granite, etc.
Rating plate, see “RATING
PLATE INFORMATION”
section.
SAFETY BARRIER
05/2015

24 Napoleon Road, Barrie, Ontario, Canada L4M 0G8 • 214 Bayview Drive, Barrie, Ontario, Canada L4N 4Y8
Fireplaces, Heating and Cooling: 705-721-1212 • Grills: 705 726-4278 • napoleonproducts.com
Framing & Clearances
VECTORTM 45 DIRECT VENT GAS FIREPLACE
Minimum Fireplace Clearances Framing Dimensions
Appliance Location
Wall Penetration
Minimum Vertical Vent Rise
TOP OF
FIREPLACE
OPENING
SHELF
COMBUSTIBLE
0” (0mm) IF NON-
COMBUSTIBLE
FINISHING IS USED
SUCH AS BRICK AND
STONE
NON-COMBUSTIBLE
NON-COMBUSTIBLE
MATERIAL
VENT HEAT SHIELD
1" 25mm
2" 51mm
2" 51mm
1" 25mm
6" 152mm
MIN
45 13/16"
1164mm
MIN PLUS
RISE*
56 "
1422mm
MINIMUM
ENCLOSURE
HEIGHT
30 11/16"
780mm
MIN
18 3/16"
462mm
12 1/2"
317mm
14"
356mm
25 5/16"
643mm
MIN
Product information provided is not complete and is subject to
change without notice. Please consult the installation manual
for the most up to date installation information.
05/2015
DO NOT BUILD INTO THIS AREA - IT MUST BE LEFT CLEAR TO PROVIDE ADEQUATE CLEARANCE
FOR THE VENT IN THIS 14” (356mm) WIDE AREA CENTERED ALONG THE FRONT OF THE
FIREPLACE. NO COMBUSTIBLES ARE ALLOWED. FIREPLACE SHOULD BE IN ITS FINAL LOCATION
BEFORE FRAMING.
!
WARNING
46 3/4" 1187mm
41 1/4"
1048mm
56"
1422mm
MINIMUM FROM BASE
OF APPLIANCE 14" 356mm MIN
20 1/8"
511mm *
INSIDE
CHASE
OUTSIDE
CHASE
73 1/2"
1867mm
MIN
BACK WALL OF CHASE / ENCLOSURE
(INCLUDING ANY FINISHING MATERIAL)
46 3/4" 1187mm
52"
1320mm
20 1/8"
511mm
20 1/8"
511mm
46 3/4" 1187mm
46 3/4" 1187mm
2" 51mm
Combustible Mantel Clearances