Nasco Life/form SmartScope LF01142U Reference guide

AUSCULTATION TRAINER USER HELP GUIDE AUSCULTATION TRAINER USER HELP GUIDE
General Information General Information
Common causes of no sounds: Common causes of no sounds:
When preparing to use your SmartScope™ and
remote, use batteries that are fully charged and posi-
tioned correctly.
*We recommend that batteries be removed when
not in use.
When preparing to use your SmartScope™ and
remote, use batteries that are fully charged and posi-
tioned correctly.
*We recommend that batteries be removed when
not in use.
• Incorrect SmartScope™ placement. Move the
SmartScope™ slowly over the torso to locate
sensors. See diagrams in your instruction
manual for placement of sensors.
• Ear tips facing the wrong way. Verify that the
ear tips of the SmartScope™ are facing forward
in your ear canal.
• Incorrect SmartScope™ placement. Move the
SmartScope™ slowly over the torso to locate
sensors. See diagrams in your instruction
manual for placement of sensors.
• Ear tips facing the wrong way. Verify that the
ear tips of the SmartScope™ are facing forward
in your ear canal.
Due to frequency changes, Adult Auscultation Trainer
SmartScopes™ with serial numbers 0 to 4999 are
only compatible with remotes with serial numbers
0 to 4999. SmartScopes™ with serial numbers 5000
and up will only work with remotes with serial numbers
5000 and up. The serial numbers are located on the
back of the device and are handwritten in ink.
Due to frequency changes, Adult Auscultation Trainer
SmartScopes™ with serial numbers 0 to 4999 are
only compatible with remotes with serial numbers
0 to 4999. SmartScopes™ with serial numbers 5000
and up will only work with remotes with serial numbers
5000 and up. The serial numbers are located on the
back of the device and are handwritten in ink.
For questions or inquires, please contact Nasco Customer Service at 800-558-9595 or [email protected]
Weekdays 7 am – 6 pm CST, Saturdays 8 am – 12 pm CST
For questions or inquires, please contact Nasco Customer Service at 800-558-9595 or [email protected]
Weekdays 7 am – 6 pm CST, Saturdays 8 am – 12 pm CST
(lower left)
sternum
space (aortic)
intercostal
Second right
intercostal space
First right
Tracheal Site
Apex
intercostal space
Fourth left
(Erb’s point)
intercostal space
Third left
(pulmonic)
intercostal
Second left
intercostal space
First left
Lung Sounds
Heart Sounds
Anterior Heart and Lung Sites
Midaxillary
Posterior Lung Sites
(lower left)
sternum
space (aortic)
intercostal
Second right
intercostal space
First right
Tracheal Site
Apex
intercostal space
Fourth left
(Erb’s point)
intercostal space
Third left
(pulmonic)
intercostal
Second left
intercostal space
First left
Lung Sounds
Heart Sounds
Anterior Heart and Lung Sites
Midaxillary
Posterior Lung Sites
+ +
+ +
+ +
+ +
NP090_13_AusculationTrainerHelpGuide.indd 1 9/13/13 11:15 AM

901 Janesville Avenue, P.O. Box 901 eNasco.com E-mail: [email protected]
Fort Atkinson, Wisconsin 53538-0901 1-800-558-9595 COPYRIGHT © NASCO 2013 PRINTED IN U.S.A. NP 090-13
901 Janesville Avenue, P.O. Box 901 eNasco.com E-mail: [email protected]
Fort Atkinson, Wisconsin 53538-0901 1-800-558-9595 COPYRIGHT © NASCO 2013 PRINTED IN U.S.A. NP 090-13
For questions or inquires, please contact Nasco Customer Service at 800-558-9595 or [email protected]
Weekdays 7 am – 6 pm CST, Saturdays 8 am – 12 pm CST
For questions or inquires, please contact Nasco Customer Service at 800-558-9595 or [email protected]
Weekdays 7 am – 6 pm CST, Saturdays 8 am – 12 pm CST
• Batteries need to be replaced. After installing
new batteries, make sure to turn the remote off
and back on. This allows the device to reset.
*SmartScope™ does not turn off.
• Battery saver mode. The remote will go into
battery saver mode if left on the same setting for
8 minutes.
• Using multiple remotes. One remote will operate
all SmartScopes™ within 100 ft. simultaneously
as long as the serial numbers are compatible.
Using multiple remotes can cause interference.
• Batteries need to be replaced. After installing
new batteries, make sure to turn the remote off
and back on. This allows the device to reset.
*SmartScope™ does not turn off.
• Battery saver mode. The remote will go into
battery saver mode if left on the same setting for
8 minutes.
• Using multiple remotes. One remote will operate
all SmartScopes™ within 100 ft. simultaneously
as long as the serial numbers are compatible.
Using multiple remotes can cause interference.
• Using an external speaker. When using an
amplifier/speaker, no sounds will be heard
through the SmartScope™.
• Check volume. Make sure the volume on the
amplifier/speaker is turned up.
• Using an external speaker. When using an
amplifier/speaker, no sounds will be heard
through the SmartScope™.
• Check volume. Make sure the volume on the
amplifier/speaker is turned up.
NP090_13_AusculationTrainerHelpGuide.indd 2 9/13/13 11:15 AM