National Instruments VXI/VMEpc 600 series User manual

VXI/VME
Getting Started with Your
VXI/VMEpc™600 Series
for Windows 95/NT
VXI/VMEpc 600 Series for Windows 95/NT
May 1998 Edition
Part Number 321882A-01

Internet Support
E-mail: [email protected]
FTP Site: ftp.natinst.com
Web Address: http://www.natinst.com
Bulletin Board Support
BBS United States: 512 794 5422
BBS United Kingdom: 01635 551422
BBS France: 01 48 65 15 59
Fax-on-Demand Support
512 418 1111
Telephone Support (USA)
Tel: [phone]
Fax: [phone]
International Offices
Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Brazil 011 288 3336,
Canada (Ontario) 905 785 0085, Canada (Québec) 514 694 8521, Denmark 45 76 26 00, Finland 09 725 725 11,
France 01 48 14 24 24, Germany 089 741 31 30, Hong Kong 2645 3186, Israel 03 6120092, Italy 02 413091,
Japan 03 5472 2970, Korea 02 596 7456, Mexico 5 520 2635, Netherlands 0348 433466, Norway 32 84 84 00,
Singapore 2265886, Spain 91 640 0085, Sweden 08 730 49 70, Switzerland 056 200 51 51, Taiwan 02 377 1200,
United Kingdom 01635 523545
National Instruments Corporate Headquarters
6504 Bridge Point Parkway Austin, Texas 78730-5039 USA Tel: [phone]
©Copyright 1998 National Instruments Corporation. All rights reserved.

Important Information
Warranty
The National Instruments VXI/VMEpc600 Series embedded computers and accessories are warranted against defects in
materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other
documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the
warranty period. This warranty includes parts and labor.
The media on which you receive National Instruments software are warranted not to fail to execute programming
instructions, due to defects in materials and workmanship, for a period of 90 days from date of shipment, as evidenced
by receipts or other documentation. National Instruments will, at its option, repair or replace software media that do not
execute programming instructions if National Instruments receives notice of such defects during the warranty period.
National Instruments does not warrant that the operation of the software shall be uninterrupted or error free.
A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on the outside
of the package before any equipment will be accepted for warranty work. National Instruments will pay the shipping costs
of returning to the owner parts which are covered by warranty.
National Instruments believes that the information in this manual is accurate. The document has been carefully reviewed
for technical accuracy. In the event that technical or typographical errors exist, National Instruments reserves the right to
make changes to subsequent editions of this document without prior notice to holders of this edition. The reader should
consult National Instruments if errors are suspected. In no event shall National Instruments be liable for any damages
arising out of or related to this document or the information contained in it.
EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. CUSTOMER’SRIGHT TO RECOVER DAMAGES CAUSED
BY FAULT OR NEGLIGENCE ON THE PART OF NATIONAL INSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE
CUSTOMER. NATIONAL INSTRUMENTS WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS,
OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. This limitation of the liability of
National Instruments will apply regardless of the form of action, whether in contract or tort, including negligence.
Any action against National Instruments must be brought within one year after the cause of action accrues. National
Instruments shall not be liable for any delay in performance due to causes beyond its reasonable control. The warranty
provided herein does not cover damages, defects, malfunctions, or service failures caused by owner’s failure to follow
the National Instruments installation, operation, or maintenance instructions; owner’s modification of the product;
owner’s abuse, misuse, or negligent acts; and power failure or surges, fire, flood, accident, actions of third parties,
or other events outside reasonable control.
Copyright
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical,
including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without
the prior written consent of National Instruments Corporation.
Trademarks
CVI™, LabVIEW™, NI-488.2™, NI-VISA™, NI-VXI™, and VXI/VMEpc™are trademarks of National Instruments
Corporation.
Product and company names listed are trademarks or trade names of their respective companies.
WARNING REGARDING MEDICAL AND CLINICAL USE OF NATIONAL INSTRUMENTS PRODUCTS
National Instruments products are not designed with components and testing intended to ensure a level of reliability
suitable for use in treatment and diagnosis of humans. Applications of National Instruments products involving medical
or clinical treatment can create a potential for accidental injury caused by product failure, or by errors on the part of the
user or application designer. Any use or application of National Instruments products for or involving medical or clinical
treatment must be performed by properly trained and qualified medical personnel, and all traditional medical safeguards,
equipment, and procedures that are appropriate in the particular situation to prevent serious injury or death should always
continueto be used when National Instruments products are being used. National Instruments products are NOT intended
to be a substitute for any form of established process, procedure,or equipment used to monitor or safeguard human health
and safety in medical or clinical treatment.

Compliance
FCC/DOC Radio Frequency Interference
Class A Compliance
This equipment generates and uses radio frequency energy and, if not installed and used in strict accordance
with the instructions in this manual, may cause interference to radio and television reception. Classification
requirements are the same for the Federal Communications Commission (FCC) and the Canadian
Department of Communications (DOC). This equipment has been tested and found to comply with the
following two regulatory agencies:
Federal Communications Commission
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Notices to User: Changes or modifications not expressly approved by National Instruments could void
the user’s authority to operate the equipment under the FCC Rules.
This device complies with the FCC rules only if used with shielded interface cables
of suitable quality and construction. National Instruments used such cables to test
this device and provides them for sale to the user. The use of inferior or nonshielded
interface cables could void the user’s authority to operate the equipment under the
FCC rules.
If necessary, consult National Instruments or an experienced radio/television technician for additional
suggestions. The following booklet prepared by the FCC may also be helpful: Interference to Home
Electronic Entertainment Equipment Handbook. This booklet is available from the U.S. Government
Printing Office, Washington, DC 20402.
Canadian Department of Communications
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur
du Canada.

© National Instruments Corporation v VXI/VMEpc 600 Series for Windows 95/NT
Contents
About This Manual
Organization of This Manual.........................................................................................vii
Conventions Used in This Manual.................................................................................viii
How to Use This Documentation Set ............................................................................ix
Related Documentation..................................................................................................x
Customer Communication.............................................................................................xi
Chapter 1
Introduction
How to Use This Manual...............................................................................................1-1
What You Need to Get Started......................................................................................1-1
Hardware Description....................................................................................................1-2
Software Description .....................................................................................................1-2
Software Configurations..................................................................................1-3
National Instruments Application Software....................................................1-4
Files and Directories Installed on Your Hard Drive......................................................1-5
Chapter 2
Setting up Your VXI/VME System
Configuring the Hardware .............................................................................................2-1
Installing the Hardware..................................................................................................2-2
Installed Software ..........................................................................................................2-3
Booting Your System for the First Time.......................................................................2-3
Verifying Your System Configuration ..........................................................................2-4
Chapter 3
Developing Your Application
Configuration.................................................................................................................3-1
Device Interaction..........................................................................................................3-3
Programming with VXI.................................................................................................3-4
Notes about VME Support ..............................................................................3-5
Compiler Symbols for NI-VXI........................................................................3-6
Debugging......................................................................................................................3-7

Contents
VXI/VMEpc 600 Series for Windows 95/NT vi
© National Instruments Corporation
Appendix A
Default Settings
Appendix B
Common Questions
Appendix C
Reinstalling the NI-VXI/VISA Software
Appendix D
Customer Communication
Glossary
Index
Tables
Table 3-1. NI-VXI/VISA Examples ......................................................................3-5
Table A-1. VXI/VMEpc 600 Series Hardware Default Settings ........................... A-1
Table A-2. VXIpc T&M Explorer Device Tab Default Settings ...........................A-2
Table A-3. VXIpc T&M Explorer Shared Memory Tab Default Settings ............. A-2
Table A-4. VXIpc T&M Explorer PCI Tab Default Settings ................................A-3
Table A-5. VXI/VME-MXI-2 T&M Explorer Device Tab Default Settings ........A-3
Table A-6. VXI/VME-MXI-2 T&M Explorer VXI/VME Bus Tab
Default Settings .................................................................................... A-4
Table A-7. VXI/VME-MXI-2 T&M Explorer MXI-2 Bus Tab
Default Settings .................................................................................... A-4

© National Instruments Corporation vii VXI/VMEpc 600 Series for Windows 95/NT
About This Manual
Use this manual to get started with the VXI/VMEpc 600 Series embedded
computers and the NI-VXI/VISA software for Windows 95/NT. This
manual summarizes the setup instructions and default settings for the
hardware and software. You may find that these sections contain all the
information you need to get started.
Organization of This Manual
This manual is organized as follows:
• Chapter 1, Introduction, describes the VXI/VMEpc 600 Series of
embedded computers along with the NI-VXI/VISA software, lists
what you need to get started, lists optional software, and gives an
overview of the directory on your hard drive.
• Chapter 2, Setting up Your VXI/VME System, contains basic
instructions for setting up the VXI/VMEpc 600 Series and the
NI-VXI/VISA software.
• Chapter 3, Developing Your Application, discusses the software
utilities you can use to start developing applications that use the
NI-VXI/VISA driver.
• Appendix A, Default Settings, summarizes the default settings for the
hardware and software in your kit.
• Appendix B, Common Questions, addresses common questions you
may have about using the NI-VXI/VISA software on the VXI/VMEpc
platform.
• Appendix C, Reinstalling the NI-VXI/VISA Software, contains the
instructions on how to reinstall your NI-VXI/VISA software. Your
VXI/VMEpc 600 Series controller was shipped with the
NI-VXI/VISA software already installed. It is unlikely that you will
ever need to use these instructions.
• Appendix D, CustomerCommunication,containsformsyoucan use to
request help from National Instruments or to comment onour products
and manuals.
•TheGlossary contains an alphabetical list and description of terms
used in this manual, including abbreviations, acronyms, metric
prefixes, mnemonics, and symbols.

About This Manual
VXI/VMEpc 600 Series for Windows 95/NT viii
© National Instruments Corporation
•TheIndex contains an alphabetical list of key terms and topics used in
this manual, including the page where you can find each one.
Conventions Used in This Manual
The following conventions are used in this manual:
♦The ♦symbol indicates that the text following it applies only to a specific
product, a specific operating system, or a specific software version.
This icon to the left of bold italicized text denotes a note, which alerts you
to important information.
This icon to the left of bold italicized text denotes a caution, which advises
you of precautions to take to avoid injury, data loss, or a system crash.
This icon to the left of bold italicized text denotes a warning, which advises
you of precautions to take to avoid being electrically shocked.
bold Bold text denotes the names of menus, menu items, or dialog box buttons
or options.
bold italic Bold italic text denotes a note, caution, or warning.
italic Italic text denotes emphasis, a cross reference, or an introduction to a key
concept. This font also denotes text from which you supply the appropriate
word or value.
monospace Text in this font denotes text or characters that you should literally enter
from the keyboard, sections of code, programming examples, and syntax
examples. This font is also used for the proper names of disk drives, paths,
directories, programs, subprograms, device names, functions, variables,
filenames, and extensions.
monospace bold Bold text in this font denotes the messages and responses that the computer
automatically prints to the screen.
monospace italic Italic text in this font denotes that you must enter the appropriate words or
values in the place of these items.
VXI/VMEpc 600 Series The term VXI/VMEpc 600 Series refers to a series of B-size, two-slot VXI
or VME embedded controllers. Currently, this series consists of the
VXIpc-650 and VMEpc-650. This term is used when information applies
equally to the VXI and VME models.
!

About This Manual
© National Instruments Corporation ix VXI/VMEpc 600 Series for Windows 95/NT
How to Use This Documentation Set
Begin by reading this manual, Getting Started with Your VXI/VMEpc 600
Series for Windows 95/NT, to get basic instructions for setting up the
hardware and software. This brief quick-start manual describes how to get
started with your kit using the default hardware and softwaresettings. Refer
to the following manuals for more information about the hardware or
software.
Getting Started
Manual
Installation and
Configuration
VXI/VMEpc 600
Series User Manual
Change Hardware
Settings (Optional)
NI-VISA
User Manual
NI-VISA
Reference
NI-VXI and NI-VISA
Function Help,
T&M Explorer,
NI Spy, VIC/VISAIC
Use Online
Utilities:
NI-VXI
User Manual
NI-VXI
Reference

About This Manual
VXI/VMEpc 600 Series for Windows 95/NT x
© National Instruments Corporation
The VXI/VMEpc 600 Series User Manual contains more details about
changing the hardware installation or configuration from the defaults, and
using the hardware.
When you are familiar with the material in these manuals, you can begin to
use the NI-VXI User Manual. This manual presents the concepts of VXI
and prepares you for detailed explanations of the NI-VXI functions. The
NI-VXI online help describes the NI-VXI functions to help you fully
understandthe purpose and syntax of each function.You can find this same
information in the NI-VXI Programmer Reference Manual. These two
manuals are available in the c:\NIVXI\Manuals directory under the
names NI-VXIUsersMan.pdf and NI-VXIProgrammerMan.pdf,
respectively. Use the Acrobat Reader program, Version 3 or later, to open
these files.
You can also access the NI-VXI online help for Windows 95/NT in the
NIVXI folder.
Refer to the NI-VXI Graphical Utilities Reference Manual and the NI-VXI
Text Utilities Reference Manual to learn more about the NI-VXI utilities.
Refer to the NI-VISA User Manual to learn about VISA and how to use it
in your system. The NI-VISA online help describes the attributes, events,
and operations you can usein NI-VISA. You can find this same information
in the NI-VISA Programmer Reference Manual. These two manuals are
available in the c:\Vxipnp\os\NIvisa\Manuals directory(whereos is
either Win95 or WinNT) under the names NI-VISAUsersMan.pdf and
NI-VISAProgrammersMan.pdf, respectively. Use the Acrobat Reader
program, Version 3 or later, to open these files.
Related Documentation
The following documents contain information that you may find helpful as
you read this manual:
• ANSI/IEEE Standard 1014-1987, IEEE Standard for a Versatile
Backplane Bus: VMEbus
• ANSI/IEEE Standard 1155-1993, IEEE VMEbus Extensions for
Instrumentation: VXIbus
• ANSI/VITA 1-1994, VME64
• VXI-6, VXIbus Mainframe Extender Specification, Rev. 1.0, VXIbus
Consortium

About This Manual
© National Instruments Corporation xi VXI/VMEpc 600 Series for Windows 95/NT
Customer Communication
National Instruments wants to receive your comments on our products
and manuals. We are interested in the applications you develop with our
products, and we want to help if you have problems with them. To make it
easy for you to contact us, this manual contains comment and configuration
forms for you to complete. These forms are in Appendix D, Customer
Communication, at the end of this manual.

© National Instruments Corporation 1-1 VXI/VMEpc 600 Series for Windows 95/NT
1
Introduction
This chapter describes theVXI/VMEpc 600Series of embedded computers
along with the NI-VXI/VISA software, lists what you need to get started,
lists optional software, and gives an overview of the directory structure on
your hard drive.
How to Use This Manual
The following flowchart shows where to turn in this manual for more
details on configuring and using the hardware and software.
What You Need to Get Started
❑VXI/VMEpc-650 embedded controller
❑VXIbus or VMEbus mainframe
❑Keyboard (and included adapter cable)
❑Mouse
Yes No
Chapter 3
Develop Your Application
Using Hardware
Defaults?
Gather What You Need
to Get Started
Chapter 1
Install Hardware, Verify System,
Run T&M Explorer to Configure
All Devices in System
Refer to Your
VXI/VMEpc 600
Series User Manual
Chapter 2

Chapter 1 Introduction
VXI/VMEpc 600 Series for Windows 95/NT 1-2
© National Instruments Corporation
❑Monitor with VGA or better resolution
❑National Instruments software media for the VXI/VMEpc 600 Series
The NI-VXI/VISA software is already installed on your VXI/VMEpc-650
computer. It is also included on disk in the event that you need to reinstall
your software. For installation instructions, please refer to Appendix C,
Reinstalling the NI-VXI/VISA Software.
Hardware Description
TheVXI/VMEpc 600 Seriesmodelsare B-sizeembeddedcomputersbased
on x86 processor architecture and on the Peripheral Component Interface
(PCI) bus. These computers are high-performance, easy-to-use platforms
for controlling VXIbus or VMEbus systems, featuring complete VXI and
VME functionality through interactive utilities and C function calls.
These embedded computers can take advantage of the VXI/VME
high-performance backplane capabilities and give you direct control of
VXI/VME registers, memory, interrupts, and triggers.
All models in the VXI/VMEpc 600 Series are fully VXIplug&play
compliant and can be used with PC-compatible software tools, the
National Instruments LabVIEW and LabWindows/CVI application
software, and the NI-VXI, NI-VISA, and NI-488.2 bus interface software.
For in-depth details on the VXI/VMEpc 600 Series hardware—including
a description of the differences between the various models in their
respective series—refer to the VXI/VMEpc 600 Series User Manual.
Software Description
NI-VXI is the name of the VXI/VME bus control library for your
VXI/VMEpc 600 Series. You can create applications using NI-VXI to
control your VXI and VME devices. NI-VXI gives you complete
VXI/VME functionality, including an API for performing basic VXI/VME
data transfers and handling VXI/VME interrupts as well as VXI-specific
functionality, such as doing message-based communication and handling
VXIbus triggers.
NI-VISA is the National Instruments implementation of the VISA
specification. VISA is a uniform API for communicating and controlling
Serial, GPIB, VXI, and VME instruments. This API aids in the creation of
more portable applications and instrument drivers.

Chapter 1 Introduction
© National Instruments Corporation 1-3 VXI/VMEpc 600 Series for Windows 95/NT
The NI-VXI/VISA software for the VXI/VMEpc 600 Series is already
installed on your hard drive. It includes an interactive configuration and
troubleshooting program, libraries of software routines for test and
measurement (T&M) programming, interactive control programs for both
NI-VXI and NI-VISA, a logging utility you can use for debugging your
applications, and a VXI Resource Manager. You can use this software to
seamlessly program multiple-mainframe configurations and have software
compatibility across a variety of controller platforms.
National Instruments also includes the NI-488.2 software kit, which gives
you access to the industry-standard NI-488.2 software for controlling
external GPIB instruments through the GPIB port on the front panel. The
GPIB interfaceon your VXI/VMEpccontrolleris fully compatible with the
NI-488.2 driver for a variety of operating systems. Any software using
NI-488.2 will run on the VXI/VMEpc-650.
Use T&M Explorer to view your entire T&M system and configure various
components, whether they are Serial, GPIB, VXI, or VME devices. This
utility also adopts the functionality of the NI-DAQ Configuration utility so
you can configure National Instruments VXI-DAQ cards.
For VXI users, T&M Explorer also features various options of how to run
the VXI Resource Manager (Resman). You can still execute Resman
independently to configure your instruments after a power cycle, but you
canalsoperformresourcemanageroperationsdirectlyfromT&M Explorer
or configure it to run Resman automatically at startup.
The NI Spy utility tracks the calls your application makes to National
Instruments T&M drivers, including NI-VXI, NI-VISA, and NI-488.2.
NI Spy helps you debug your application by clearly highlighting the
functions that return errors. You can let NI Spy keep a log of your
program’s calls to these drivers so that you can check them for errors
at your convenience.
Software Configurations
There are three software configurations described in this manual:
• NI-VXI for Windows 95—This is a fully 32-bit native Plug and Play
driver for Windows 95. You can run only 32-bit applications with this
driver. Applications developed using this driver run with NI-VXI for
Windows NT without the need to recompile.
• NI-VXI for Windows NT—This is a 32-bit driver designed for
Windows NT. You can use this version to develop and run 32-bit
applications for Windows 95/NT.

Chapter 1 Introduction
VXI/VMEpc 600 Series for Windows 95/NT 1-4
© National Instruments Corporation
• NI-VISA for Windows 95/NT—This is a 32-bit driver designed for
Windows 95/NT. Note that for VME and VXI support, the NI-VXI
driver must be installed. You can use this driver to develop and run
32-bit applications for Windows 95/NT.
National Instruments Application Software
Your VXI/VMEpc 600 Series kit comes with the NI-VXI/VISA bus
interface software already installed for you. In addition, you can use the
National Instruments LabVIEW and LabWindows/CVI application
programs and instrument drivers to ease your programming tasks. These
standardized programs match the modular virtual instrument capability of
VXI/VME and can reduce your VXI/VME software development time.
These programs are fully VXIplug&play compliant and feature extensive
libraries of VXI instrument drivers written to take full advantage of direct
VXI control. LabVIEW and LabWindows/CVI include all the tools needed
for instrument control, data acquisition, analysis, and presentation.
LabVIEW is a complete programming environment that departs from the
sequential nature of traditional programming languages and features a
graphical programming environment.
LabWindows/CVI is an interactive C development environment for
building test and measurement and instrument control systems. It includes
interactivecode-generation tools anda graphical editor forbuilding custom
user interfaces.
When youboot your systemfor the first time, youcan inserta configuration
disk to access either or both of these application programming
environments. Refer to the Booting Your System for the First Time section
in Chapter 2, Setting up Your VXI/VME System, formore information. Both
LabVIEWandLabWindows/CVI integratetheVXI and VISA librariesthat
are required to support your VXI/VMEpc-650. You also get hundreds of
complete instrument drivers, which are modular, source-code programs
that handle the communication with your instrument to speed your
application development.

Chapter 1 Introduction
© National Instruments Corporation 1-5 VXI/VMEpc 600 Series for Windows 95/NT
Files and Directories Installed on Your Hard Drive
Your hard drive includes a directory calledimages in its root that contains
software and soft copies of manuals for the operating system and for the
peripherals. The directory structure under the images directory is logically
organized into several levels.
In the images directory itself, you will find a manuals directory,
an os directory, and directories for each of the peripherals of your
computer.
The manuals directory contains quick reference guides, technical
reference manuals, and National Instruments software manuals, all in
Adobe Acrobat portable document format (PDF). Use the Acrobat Reader
program, version 3 or later, to open and read these manual files on your
computer, and to print them if desired. To access any of these manuals,
change your directory to c:\images\Vxx600\manuals and list the
contents of that directory.
The os directory contains a subdirectory corresponding to the operating
system installed on your computer. That subdirectory contains an image of
the CD from which your operating system was installed. As a result you do
not have to insert the CD when you install a new peripheral. When you are
asked to insert the CD, you can simply direct the system to look in the
images\os directory instead.
For example, if your system has Windows 95 installed, you should find
an image of the Windows 95 CD in c:\images\os\win95.
The rest of the directories correspond to each of the peripherals in
your system. Within each of these directories are the drivers for the
peripherals. These files and directories are copied exactly from the
distribution disks of the manufacturers, so the naming conventions
vary from peripheral to peripheral.
Because the naming conventions may not be completely straightforward,
National Instruments provides a text file named drivers.txt in the
images directory. The drivers.txt file explains how to install support
for each peripheral. You may want to print this file for reference when you
install your peripheral device drivers.

© National Instruments Corporation 2-1 VXI/VMEpc 600 Series for Windows 95/NT
2
Setting up Your VXI/VME System
This chapter contains basic instructions for setting up the VXI/VMEpc 600
Series and the NI-VXI/VISA software.
You can use this material as a guide to quickly configure and operate your
VXI/VME system usingthe VXI/VMEpc 600 Series. This chapterassumes
that you intend to perform a basic configuration as follows:
• You have one VXI/VMEbus chassis in which you will be using the
VXI/VMEpc-650 as System Controller.
• You will be using the NI-VXI/VISA software for initialization,
configuration, and device interaction.
• You will use the default hardware and software settings.
Configuring the Hardware
The default hardware settings are acceptable for most typical applications.
Refer to Appendix A, Default Settings, for a complete listing of the
hardware and software default settings.
The VXI/VMEpc 600 Series User Manual fully describes the configuration
and installation of each embedded computer in the VXI/VMEpc 600
Series. Refer to this manual if you want to try a different hardware
configuration, orif you would like more information on aparticular setting.
Use the T&M Explorer utility in NI-VXI/VISA to change any of the
configuration settings for the VXI/VMEpc. For information on the
software, including optional settings, use T&M Explorer and its online
help. Use the Windows Start menu to open either the NI-VXI or NI-VISA
program group and select T&M Explorer. To access the T&M Explorer
online help, open the Help menu and select Help Topics.

Chapter 2 Setting up Your VXI/VME System
VXI/VMEpc 600 Series for Windows 95/NT 2-2
© National Instruments Corporation
Installing the Hardware
Caution To prevent electrostatic discharge, touch the antistatic plastic package to a
metal part of your VXI/VMEbus chassis before removing the VXI/VMEpc-650
from the package.
Warning To protect both yourself and the chassis from electrical hazards, the chassis
should remain off until you are finished installing the VXI/VMEpc module.
Plug in your chassis but leave the power turned off. Install the
VXI/VMEpc-650 in the first slot of the VXI/VME chassis—designated
as Slot 0 in VXI systems, or as Slot 1 in a VME chassis. In its default
configuration, the VXI/VMEpc 600 Series automatically detects whetherit
should be the system controller. Although you can use the module in other
slots as non-system controller, this example describes the basic installation
as system controller. The system controller operates certain VXI/VMEbus
lines as required for VXI/VME systems. Verify that any other devices with
system controller capability that are located in the same chassis are not
configured as system controller.
Caution Having more than one device configured as system controller will damage the
VXI/VME system.
For VXI systems that include VME devices, ensure that the VME devices
are not configured in the upper 16 KB (starting from 0xC000) of the A16
address space. This region is reserved for VXI device configuration
registers, which are used for initializing, configuring, and interacting with
VXI devices.
Also ensure that no VXI devices in your system are configured for logical
address 0, which is the default configuration for the VXI/VMEpc 600
Series.
Complete your installation as follows:
1. Attach cables for your keyboard, mouse, video, and any devices you
want to connect to your system. Refer to the VXI/VMEpc 600 Series
User Manual if you are not certain about any of these connections.
2. Turn on power to the chassis.
3. Follow the prompts in the Setup program.
!
!

Chapter 2 Setting up Your VXI/VME System
© National Instruments Corporation 2-3 VXI/VMEpc 600 Series for Windows 95/NT
Installed Software
Your VXI/VMEpc 600 Series kit comes with the NI-VXI/VISA bus
interface software already installed. However, if you receive a software
update, or if you need to reinstall software in the event that your files were
accidentally erased, refer to Appendix C, Reinstalling the NI-VXI/VISA
Software. This appendix explains how to use the Setup program.
If you need to reinstall LabVIEW or LabWindows/CVI, use the CD or
diskette package that came with these programs.
Booting Your System for the First Time
At Windows 95/NT startup, you are prompted to insert a disk to configure
the system for LabVIEW or LabWindows/CVI. These programming
environments are already installed on your system but you must insert a
configuration disk when prompted so that you can access and use them. If
you ordered either of these programming environments, select the
appropriate checkbox and insert the configuration disk. Follow the
instructions as prompted.
Do not select either checkbox if you did not order LabVIEW or
LabWindows/CVI. Continue with the rest of the Setup program.
Caution Do not disregard the prompt to configure the system for LabVIEW or
LabWindows/CVI. The Setup program assumes you do not need these programs
and deletes them from your hard drive unless you insert the configuration disk
during the initial setup. If you neglect to do this, you will need to install LabVIEW
or LabWindows/CVI from the CD or diskette set if you want to use either program.
If your system includes any VXI devices, you should now run T&M
Explorer. It prompts you to run Resman, which is the National Instruments
Resource Manager. You must run Resman every time the chassis power is
cycledso that your application can access devices in the VXI/VME chassis.
You can configure T&M Explorer to automatically run Resman on
power-up. T&M Explorer contains right-click help that leads you through
your configuration tasks.
Whether you are a VXI or VME user, please continue with Chapter 3,
Developing Your Application, for information about using T&M Explorer
in your system.
!

Chapter 2 Setting up Your VXI/VME System
VXI/VMEpc 600 Series for Windows 95/NT 2-4
© National Instruments Corporation
Verifying Your System Configuration
After you finish configuring the system through T&M Explorer, verify the
system configuration through one of the interactive control utilities. Use
VIC under NI-VXI or VISAIC under NI-VISA.
For an example on how to use VIC, refer to the Device Interaction section
in Chapter 3, Developing Your Application.