National Instruments PCI-8212 User manual

GETTING STARTED
GETTING STARTEDGETTING STARTED
GETTING STARTED
PCI-8212 for Windows 2000/Me
PCI-8212 for Windows 2000/MePCI-8212 for Windows 2000/Me
PCI-8212 for Windows 2000/Me
Insert the NI-488.2 CD, then choose Install NI-488.2 Software for Windows.
Shut down, then power off computer.
Install hardware*and cables, then power on computer.
*For Help installing your hardware, refer to the PCI-GPIB topic in the GPIB Hardware Guide
(available on the NI-488.2 for Windows CD through View Documentation).
1
2
3

Windows automatically installs the driver.
Windows automatically installs a driver for the Ethernet adapter from its own library of drivers.
Refer to the installation guide to update the device driver.*
Restart computer, then connect to your network.
*For Help updating your driver, refer to the PCI/PXI Ethernet Adapters Installation Guide (available on the PCI/PXI Ethernet
Adapters CD). The installation guide also contains cabling instructions and troubleshooting tips.
4
5

Run NI-488.2 Getting Started Wizard.
6

Tel: [phone] ·Fax: [phone] ·ftp.ni.com
Copyright 2000 National Instruments Corporation. All rights reserved. Product and company
names mentioned herein are trademarks or trade names of their respective companies.