Native Trails Table User manual

Table Installation Instructions
60" or 72" Desk
General Instructions
Questions? Call us at [phone] or send us an email at [email protected]
Hardware:
12x Bolts
•Remove all parts from the box and lay out on a soft, dry surface such as cardboard
or carpet, to protect finish and ensure that no pieces are lost.
•Do not throw away any packaging materials until assembly is complete.
•TABLE COMPONENTS ARE HEAVY - EXERCISE CAUTION WHEN LIFTING.
TWO PERSON LIFT IS REQUIRED FOR TABLE TOP.
Materials Included:
Desk Drawer Assembly
A
Tabletop Hardware:
12x Lock Washers
Table Legs (2)
BDesk top (separate crate)
C
12x Washers Allen Wrench
4x Lag Bolts or
Lag Screws
4x Washers
4x Lock Washers
or

Table Installation Instructions (continued)
Small Trestle Base
3.4 Place Desk Top (C) on the assembled desk and attach from the
bottom using 2 x Lag Bolts (5) and 2 x Washers (6) and 2 x Lock
Washers (7) using a 3/16th wrench (not provided).
1. Remove drawers from Desk Drawer Assembly and set aside
2. Flip Desk Drawer Assembly (A) upside down on a soft surface.
Attach both left and right legs (B) using 12 x bolts (1) and 12 x
washers (2) and 12 x lock washers (3) as shown in the diagram.
3. Return Desk to upright position and insert drawers.