Natural Signature Ballet 5099S User manual

Leaning Table
Top
1Pc
PART LIST
A B Back
1Pc
CLeg
2Pcs
HARDWARE LIST
D E F
JCBC Screw M6 x 35mm
3 Pcs
G
H
Allen Key M4
1 Pc
L Bracket
1 Pc
Wall Plug
1 Pc
CSK Tapping Screw
#8 x 32mm
1 Pc
ICSK C/B Screw
M4 x 16mm
1 Pc
Please review all parts and hardware before disposing of any packaging.
Check to be sure that all parts and hardware are complete before you start assembly.
Before beginning assembly, separate each type of screw.
Using a screw that is too long will cause damage.
Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
TIPS
8
Place all parts on a clean and smooth surface to avoid the parts from being stratched.
1
2
3
4
5
6
7
Keep the product away from heat and humidity.
9Light blue stains and natural wood knots on the product are not considered defects.
PAGE 1 OF 2

Leaning Table
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
D
E
A
B
x 3 Pcs
C
G x 1 pc
F
H
Fx 1 pc
H x 1 pc
I
I x 1 pc
Optional
Drill Hole & Insert Wall Plug.
STEP 3
Marking point for L-Bracket.
PAGE 2OF 2