Natural Signature ZIG ZAG DIVIDER User manual

PAGE 1 OF 2
HARDWARE LIST
PART LIST
ZIG ZAG DIVIDER
Shelf (With Nut)
3 Pcs
A
E
JCBC Screw M6 x 40mm
6 Pcs
Wood dowel M8 x 30mm
2 Pcs
D
Shelf (Bottom)
1 Pc
BFolding frame
1 Pc
C
FAllen key M4
1 Pc
ITEM NO. 25-4658
Ref: 25-4658/DP/210718
Please review all parts and hardware before disposing of any packaging.
Check to be sure that all parts and hardware are complete before you start assembly.
Before beginning assembly, separate each type of screw.
Using a screw that is too long will cause damage.
Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
TIPS
8
Place all parts on a clean and smooth surface to avoid the parts from being stratched.
1
2
3
4
5
6
7
Keep the product away from heat and humidity.
9Light blue stains and natural wood knots on the product are not considered defects.
Scan Me For Step-By-Step
Real Photo Assembly Instructions

PAGE 2OF 2
ZIG ZAG DIVIDER
ASSEMBLY INSTRUCTIONS
STEP 1
1STEP 2 2
STEP 3
3STEP 4 4
E
x2
B
C
D
F
x6
A
A
A
C
ITEM NO. 25-4658
C
Ref: 25-4658/DP/210718