Navatics Mito User manual

I
Underwater Drone
Owner’s Guide

I
Important Safety Instructions
Please read this owner’s guide carefully and save it for future reference.
Important safety instructions
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions
5. Do not use this system in dangerous area
6. Install in accordance with the manufacturer’s instructions
7. Do not install near any heat sources, such as radiators, heat registers, stove or
other apparatus that produce heat
8. Only use attachments/accessories specified by the manufacturer
9. Unplug and take out the battery when it is unused for long periods of time
10. Refer all servicing to qualified service personnel. Servicing is required when the
system has been damaged in any ways
WARNING:
1. Do not place naked flame sources, such as lighted candles, on or near the
product
2. Do not subject batteries to mechanical shock
3. In the event of a battery leaking, do not allow the liquid to come in contact with
the skin or eyes. If contact has been made, wash the affected area with copious
amounts of water and seek medical advice
4. Do not use any chargers other than the ones specifically provided for the
equipment by the manufacturer
5. Do not leave a battery on prolonged charge when not in use
6. After extended periods of storage, it may be necessary to charge and discharge
the batteries several times to obtain maximum performance
7. Batteries works in temperatures between 23°F(-5°C) to 113°F (45°C)
CAUTION: Do not make unauthorized alterations to the product; doing so may compromise
safety, regulatory compliance, system performance, and may void the warranty.
WARNING: Contains small parts which may be a choking hazard. Not suitable for
children under age 3.
WARNING: This product contains magnetic material. Contact your physician if you
have questions on whether this might affect the operation of your implantable
medical device.
NOTE:
Product markings are located on the bottom and inside battery chamber of the product.
This product contains no user serviceable parts. Contact Navatics Customer Service for all
servicing concerns.

II
Declaration of Conformity
Object of the Declaration:
Product: Underwater drone
Model: Navatics MITO, Navatics Wireless Communication Buoy
Company Name: Navatics Technology (Shenzhen) Limited
Address: Room 209, Bldg.17, 1201 Liuxian Ave., Shenzhen, Guang Dong Province, China
The object of the declaration is in conformity with the following directives:
EC Council Directive of 2014/30/EU
EC Council Directive of 2014/53/EU
Test Standards:
EN 55032:2015/AC:2016; EN 55035:2017;
EN 61000-3-2:2014; EN 61000-3-3:2013
Draft EN 301 489-1 V2.2.0:2017-03; Draft EN 301 489-3 V2.1.1;
EN 300 440 V2.1.1 (2017-03); EN 62479:2010;
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
FCC Rules and Regulations Part 15 Subpart B Class B;
ANSI C63.4:2014
The original certificate was issued by
Dongguan Dongdian Testing Service Co., Ltd. in Guang Dong, China.
Navatics MITO
CE Test Report NO.: DDT-R18111907-1E2
Issued Date: Mar 19, 2019
FCC Test Report NO.: DDT-R18111907-1E1
Issued Date: Mar 19, 2019
Navatics Wireless Communication Buoy
CE Test Report NO.: DDT-R18111907-1E3, DDT-R18111907-1E5, DDT-R18111907-1E6, DDT-
R18111907-2S1,
Issued Date: Mar 28, 2019
Signature
Andreas Widy, Chief Executive Officer & Co-founder of
Navatics Technology (Shenzhen) Limited

III
Regulatory Information
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by Navatics Technology Ltd could void
the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Please complete and retain for your records:
Serial and model numbers can be found on the bottom of the system
MITO:
Serial number:___________________________________________
Model number: NMR0001
Battery
Serial number:___________________________________________
Model number: NMB001
Wireless Communication Buoy
Serial number:___________________________________________
Model number: WCR0001
Remote controller
Serial number:___________________________________________
Model number: SRC0001
Purchase date:___________________________________________
We suggest you keep your receipt with this owner’s guide.

0
Contents
Introduction
About Navatics MITO……………………..………………………………………..….…………………...…… 1
Unpacking the System……………………………………………………………………………..…………….. 2
Navatics App……………………………………………………….…………………….……………..….………… 9
Quick Start ……………………………………………………………………………….…….………..…….…..… 12
Preparing for Dive
Evaluating Conditions and Safety….…………………………………………….……………………...… 14
Power On and Connect……………………………………………………………………………..………..… 16
Sensor Calibration………………………………………………………………………………...…………...… 19
Preparing for Launch…………………………………………………………………………….…..……….…. 20
Diving …………………………………………………………………………………………………….…....………... 21
After Diving
Cleaning…………………………..………………………………………………….……………….…..……………. 22
Manage Dive Log…….……..…………………………………………………….…………….…...…..……….. 22
View Image…..………………….………………………………………………….…………….…...…..……….. 22
Download Image….…………………………………………………………….…………………..…………….. 23
Care and Maintenance
Trouble Shooting…………………………….……………………………………………..….……….………… 24
Changing Propellers…………………………………………………………………………………….………… 25
Cleaning Thrusters…………………………………………………………………..…….……………………… 26
Updating Firmware……………………………………………………………………….…………….………… 26
Technical Information…………………………………………………………………...……………….……… 27

1
Introduction
About Navatics MITO
Navatics MITO is an underwater vehicle that can be used to explore depths. It uses four highly
efficient thrusters to stabilize and maneuver itself underwater. It captures 4K videos and 12
megapixel photos, and is capable of carrying extra payload without deterioration in
performance.
MITO boasts 4 knots (2 m/s) maximum speed. The battery, designed to be replaceable, runs
for 2 hours when fully charged. The wireless communication buoy comes with 4 hours
runtime, equipped with solar panel to extend usage duration.
System features
Best built in active stabilization system
Powerful thrusters tilt, hover and stabilize Navatics MITO even in heavy
currents to capture the exact footage you want.
45° Adjustable tilt lock
Adjustable tilt lock from -45 ° to 45 ° enables it to capture a stunning shot
while moving forward or backward.
Control wirelessly up to 500M
The custom-designed remote controls Navatics MITO uses radio frequency. It
connects your smartphone to a wireless transmission system in a waterproof
buoy with a range up to 500 m /1640 ft.
Vivid color, 4K recording and 1080p HD streaming
Navatics MITO shoots at 4K 30 frames per second and captures 12MP stills. It
also offers 1080p streaming to the Navatics app, which features built-in tools
for color correction and let you share your underwater moments directly on
social media.
Brave the dark & Explore deeper
Two bright 1000 lumen LED lights illuminate a clear path for Navatics MITO
as it navigates, ensuring you to see where you’re going and what footage
you’re capturing.
Recharge & Swap for longer dives
Wonders never cease in the deep, so why should Navatics MITO? Stay
underwater longer with a 2-hour battery that you can swap out easily.

2
Introduction
Unpacking the System
Carefully unpack and confirm that the following parts are included.
Inside the box
Navatics MITO ROV 4x Spare propellers Wireless communication buoy w/50m tether
Remote controller Smart device mount A & B OTG (Micro USB, Type C) & Lightning cables
Smart battery Smart battery charger Buoy and remote charger
2x Type C charging cable USB Data Cable Transport foam box
May ship with multiple AC power adapters. Use the AC power adapter for your region.
NOTE: If part of the system is damaged, do not use it. Contact your authorized Navatics dealer
or Navatics customer service.

3
Introduction
Drone
Front thruster
Tether connector
Tether hook
Light indicator
Rear thruster
White: Normal
Blue: Calibrating
Red: Problem occurred
(See trouble shooting on
page 24)
1000 lumen LED Light x 2
Right thruster
Lens protector
connector
4K Camera
Left thruster
NOTE:
Use it on land to protect the lens from
scratches and static discharge.
Remove the protector when MITO is in
water for the best visuals.

4
Introduction
Drone
Battery cover
Accessory mount
Battery chamber
Battery switch
The mount can hold up to 17.6 ounces (500g)
accessory without extra flotation.
NOTE:
With extra weight MITO might not be able to
keep positive buoyancy. It means MITO might
sink instead of float when the motor is off.
WARNING:
DO NOT mount any dangerous object on to
MITO including but not limited to fishing net
and spear gun
Open the battery cover to access the battery
chamber
Battery connection cable

5
Introduction
Battery
Press and hold the red switch button, then check the status of the battery indicator
Each light indicates 25% of the battery.
Charger for battery
1. Plug the power cord into the connector on the smart battery
2. Connect the charger with the charging cord
3. Plug in to power socket
4. Check the power indicator for charging status
Battery holders
Battery power indicator
Connection point
Battery power switch
On: Turned on
Off: Need to charge
Blinking: Charging