Attop A8 User manual

1
2 3
Drone X1 Battery X2Phone clamp X1Remote X1
1
2
(1) Landing Gears Installing
Install landing gears to specified position
Install propeller guards to specified position
1. Package Contents
4. Remote Controller
3.Install
A8 Operation Manual
(Suitable for operation in calm and light winds)
Suitable for 14 years old and above
(3) Battery Installing
(2) Propeller Guards Installing
Insert the battery into specified
position.
Keep pressing the buckle of battery
case then pull the case to take it out,
insert 3xAAA battery into specified
position.
Remote Controller
Propeller# A
Propeller# A
Propeller# B
Propeller# B
Connect the battery with drone.
(1) Power switch
(2) Left joystick
(Altitude Control, L/R turning)
(3) Right joystick
(Movement Control)
(4) Left function switch
(Take off/Landing, Emergency stop)
(5) Right function switch
(Headless mode, Return)
(6) Take photo
(7) Video
(8) Speed switch
(9) 360° Stunt
Battery Case
2.Charging
Charging Guide for battery
1. Connect the USB cable with power supply, the USB LED solid on, indicate the
USB cable is power on.
2. Connect the battery with USB cable. When USB LED light is off, the battery is
charging. When USB LED light is on, the battery is fully charged.
312
5V
Note：Use an power supply with standard output voltage 5V and current greater than
or equal to 2A, otherwise there is a risk of overloading the USB cable and Battery.
The flight time is about 10 minutes and the charging time is about 120 minutes.
Screwdriver X1USB cable X1 Propeller guards X4 Spare propellers X2
AAA 1.5V
AAA 1.5V
AAA 1.5V
(4) Phone clamp installing
Put the phone clamp to specified position on the remote, and make sure
to fasten the phone clamp.
（2）
（4）
（6）
（8） （9）
（7）
（5）
（3）
（1）
Low battery warning
When the drone is flying, the indicator lights on the drone are flashing, and the remote
control handle emits a "beep" alarm sound, indicating that the drone power is too low.
At this time, the drone needs to return and charge.
Customer Service Email : [email protected]
www.attoptoys.com
Get Assistance & Extended Warranty
Use camera or QR scanner to scan
Or Visit: https://attop.afterservice.vip

45
6 7
7. Aircraft Functions
5. How To Fly
6.Using the Remote Controller
Left Stick Right Stick
Up / Down Forward / Backward
Turn left / Turn Right Left-sideward / Right-sideward
(1) Switch On the Power
OFF ON
Power on the drone. Power on the Controller.
(3) Gyroscope Calibration
(4) Activate motors for taking-off
Push Left Joystick to right corner and Right
Joystick to left corner at the meantime (Pic 2).
The indicator lights of the drone are flashing
rapidly for about 3 seconds. The The indicator
lights are turning solid when completed.
1
(2) Pairing
2
Take off: After activating motors, press “Left function switch”
(or push up the Left Joystick slowly) to take off.
Landing: When the drone is in the air, press “Left function switch”
(or keep pushing down the Left Joystick slowly) to land.
Emergency Stop
In case of emergency status,
keep press “Left function switch”
about 3 seconds, the drone will
immediately stop functions and
drop off.
After pairing, push the Left Joystick to the top then release to activate motors,
then the propellers start rotating.
After Powering On the drone, both indicator
lights on the Drone and Remote are flashing,
then push the Left Joystick to the top, and
then down to the lowest (Pic 1). After 2 secs,
the indicator lights are turning solid,
that means the pairing succeeds.
(5) Take off / Landing
360° Stunt Function
Adjustment for deviated flying to Front/Backward
Adjustment for deviated flying to Sideward
1. Press the 360° Stunt
2. Push the stick to right, the drone will rotate 360° toward right direction
1. Press the 360° Stunt
2. Push the stick to top, the drone will rotate 360° toward front direction.
1. Press the360° Stunt
2. Push the stick to left, the drone will rotate 360° toward left direction.
1. Press the 360° Stunt
2. Push the stick to bottom, the drone will rotate 360° toward back direction.
Vertically press Left Joystick for activate
adjustment fucntion.
If it leans forward, push Right Joystick to
backward.
If it leans backward, push Right Joystick to
forward.
Vertically press Left Joystick for activate
adjustment fucntion.
If it leans right sideward, push Right
Joystick to left side.
If it leans left sideward, push Right
Joystick to right side.
Note:
* There are continuous beeps from the remote when you activate this function.
If you do not move the Right Joystick about 5 seconds after you press the 360°
Stunt switch, the function will be cancelled and the remote will stop beeping.
* This function can’t be activated when the battery of the drone is low.
Vertically press Left Joystick again for deactivate adjustment fucntion,
after finished adjustment.
Vertically press Left Joystick again for deactivate adjustment fucntion,
after finished adjustment.
1
2
OR
12
360°
flip
360°
flip
12
12
12
(Pic 1)
(Pic 2)

8 9
10 11
Front
Back
Origin Headless Mode
Headless Mode
Headless Mode
Front
Back
Front
Back
Speed Adjustment
Users are recommended to stay same orientation as the drone head is facing when
the drone takes off.
Headless Mode, the forward direction is same as the direction when the drone took off,
where the head of drone was facing.
In order to make sure the users can clearly identify drone’s direction, we suggest that
users better stay in the same orientation as the drone facing when it takes off.
Then no matter which direction the head is facing, the drone will lock the controlled
direction as the remote controller, easy to control back the drone.
Press the "Right function switch". When the indicator lights are slowly flashing, the drone is in
Headless Mode.
Press the "Right function switch" again. When the indicator lights stop flashing, the Headless Mode
is diactivated.
Speed ±
Press the speed switch to change the speed gear while
flying. There are 3 gears, press the Speed switch, you will
hear “beep, beep”, means it is on the second gear speed.
Press again, you will hear “beep, beep, beep” means it is on
the third gear speed. Press again, you will hear “beep”
means it is back to the first gear.
Remark: Beginners would be suggested to use the first
gear speed firstly to play until skillful.
8. Return-to-home function
Propeller dia.: 100mm
Aircraft: 301X301X70mm
Total weight: 90g±2g
Battery: 3.7V950mAh
Charging time: About 120 mins
Flight time: 10 mins
Gyroscope: Built-in
Working temperature: -10°C to 40°C
Remoter controller: 2.4G
Motor: 8*26 4pcs
Effective Control Range: 50 meters
Wifi Transmission Range : 30-40 meters
(in a wide open area with no electromagnetic interference)
Working frequency: 2.4G
Battery: 3xAAA
Remote Controller Parameters
11.Aircraft Parameters
10.Photograph and Video 12. FAQ
ISSUES CAUSE SUGGESTIONS
1
2
3
4
After the battery is
insertedin the drone,
indicator lights on
drone keep flashing,
no response to
operations
No response after
battery is inserted in
the drone
Motor does not run
when operating the
throttle stick and the
indicator lights on
drone keep flashing
Main motor blades
spin but the drone
won’t fly
1. Some of the blades
have been deformed
2. Battery power is
not enough
1. Replace the main
blade
2. Charge the battery or
replace it with a fully
charged battery
Power for the Li-Poly
battery is not enough
Charge the battery or
replace it with a
full-charged battery
1.Check if the power
for remote and drone
is full charged.
2.Connection of the
poles are not good
1.Open the remote
battery case and make
sure if the battery is
inserted in right position
2. Use a fully charged
battery
3. Reinstall the battery
and confirm whether it is
good connecting with the
poles well.
Frequency matching
between remote and
receiver not successful
Reoperate the frequency
matching for remote
and drone (please refer
to P.4 for details)
9.Headless Mode Function
Take Photos Video
Take Photos：Press the button of "take photo". Please make sure to open the app on your
smart phone before using it, then you can review the photos taken in the media
file of app.
Video：Press the button of "take video", press to start and press again to finish and save
the video. Please make sure to open the app on your smart phone before using it,
then you can review the videos taken in the media file of app.
In regular mode, when the drone fly forward, stand and make sure the remote toward the tail of
drone then press the “Right function switch” to activate headless mode, no matter which direction
that the drone heading to, keep pressing the “Right function switch” about 3 seconds, the drone
would fly straight back to remote location.
Note : 1. The drone will not land itself when operate this function, just fly straight toward the remote
direction, negative direction operate the right stick to stop flying.
2. If you change your position while playing, Return-to-home function will be inaccurate.
Now turn the drone's tail toward the remote, then press the “Right function switch” to
activate headless mode, and keep pressing the “Right function switch” about 3 seconds,
then It will come back successfully. Or you can also face to the dorne's tail and calibrate
the gyroscope after it lands. Such operation is to update the drone's return direction.

13.Battery Using Attention
12 13
14 15
The aircraft is mostly made of PA fiber or
polyethylene as well as other main materials for
electronic products. Therefore, it must be kept
from the source of heat and exposure to sunlight
so as to avoid possible damage of deformation or
even meltdown due to high temperatures.
This product is suitable for users over 14 years
old. Since the remote-control quadcopter may pose
a certain degree of difficulty for learners at the
beginning, it is recommended for it to be operated
under the guidance of experienced people for the
sake of safe flight.
Safe usage
of the battery
Keep away from
source of heat
Never operate the
product alone
CAUTION
WARNING
FORBIDDEN
Batteries are to be inserted with the correct
polarity. The supply terminals are not to be
short-circuited. Different types of batteries or new
and used batteries are not to be mixed.
The exhausted batteries are to be removed from
the toy. For long time storage, please take them
out to prevent battery leakage.Please dispose
abandoned batteries in accordance to the laws and
regulations of the corresponding region to prevent
pollution to the environment.
Remote-control models of quadcopter are dangerous merchandise. Their flight must be
operated away from the crowd. Such factors as man-made improper assembly or mechanical
damage, poor control of the electronic equipment, as well as the unfamiliar manipulation may
lead to unexpected flight accidents, such as uncontrolled flight and aircraft damage. Users are
advised to pay attention to the flight safety and understand that they are held responsible for
any accident caused by negligence.
CAUTION
Special drone for Indoor and
outdoor should stay away from
barriers
This product is a remote-control drone, that suitable for in indoor using and
outdoor environments (the outdoor wind power less than Force 2). To fly this
drone, please choose appropriate obstacle-free indoor and outdoor sites
with proper distance kept from the crowd or pet animals. Please don’t
operate the product in any unsafe environments, such as places of heat,
wires, power supply, etc., so as to prevent the quadcopter from the risks of
fire and electric shock resulting from collision, ditching, and entangling of
the drone.
FORBIDDEN
FORBIDDEN
FORBIDDEN
FORBIDDEN
Safe usage of the lithium battery
Away from moist environments
Never misuse the product
The interior of the aircraft is also composed of many sophisticated electronic
components so it must absolutely be kept away from moisture or water vapor.
Don’t operate the aircraft in the bathroom or on rainy days; otherwise water
vapor may get inside of the aircraft and cause mechanical parts and
electronic components to malfunction leading to expected accidents.
Please do not disassemble or modify the product. For any upgrade, repair
or maintenance, please use the parts specified in our catalog to ensure the
safety of the structure. Please make sure the product is used within the
limits of operation. Don’t overload the product, and don’t use it in any other
illegal ways than prescribed by safety concerns and laws.
Lithium batteries are more dangerous than others. Be sure to read carefully
and follow the following precautions before using it. We will not be held
responsible for any damages caused by any improper use of the battery.
To avoid the danger of explosion or fires, it is forbidden to use other
chargers than the one made by our factory. Such actions done to the
battery as impact, dismantling, reverse connection of the positive and
negative poles, and burning are forbidden. Avoid metal objects from
contacting the positive and negative poles of the battery, which may cause
short circuit. Please prevent sharp items from piercing the battery, and
avoid the risk of battery fire. Please be careful when charging the battery.
Make sure that the battery is charging within your sight. Keep it out of the
reach of young children so as to avoid dangers. Don’t charge the battery
when the battery is heated after use. Otherwise, it may cause the battery to
expand, change, explode or even catch fire, threatening the safety of life
and property. To dispose of the battery, please recycle the battery in strict
compliance with the waste disposal laws and regulations of local countries
or regions in order not to pollute the environment.
SAFETY AND PRECAUSTIONS
Matters needing attention
（1）Rechargeable batteries are to be removed from the toy before being charged.
（2）Non-rechargeable batteries are not to be recharged.
（3）Rechargeable batteries are only to be charged under adult supervision.
（4）Only used to charging 2S Li-ion or Li-polymer battery pack. if not, the charger or battery may
be damaged .
（5）During charging, the charger should be put in dry and ventilated place and far away from
heat source and inflammable and explosive substance.
（6）Never immediately charge your battery pack as soon as the flight is finished, or when
its temperature doesn’t cool down. Otherwise the battery will take a risk in swelling, even a fire.
（7）Ensure the correctness of polarity before connection the battery to charger.
（8）Avoid drop and violence during the process of charging. drop and violence will result in
internal short circuit of the battery.
（9）For the sake of safety, please use original charging equipment and battery pack .
please change new one in time when the flying time is becoming shorten due to long time usage .
（10）If it is retained in the charger for a long time after saturated, the battery may automatically
discharge. When the charger detects that the voltage of individual cells is lower than the
rated voltage, it will re-charge until saturated. Frequently charging and discharging will
shorten the lifetime of your battery pack. It is advised that please cut off the power and took
off the battery after the charging is saturated.
Maintenance of battery pack
（1）The battery pack should be put in dry and ventilated place. The storage temperature of
environment is ranged from 18°C to 25°C.
（2）Please avoid frequent charging and excessive discharging the battery pack in order to
prolong its life cycle.
（3）It is a must to maintain the battery pack before long-term storage. That is to charge the
battery to the level of 50-60% saturation.
（4）If the storage term is over 1 month, it is advised to monthly check the voltage of every cell
of the battery pack. The voltage of every cell should be not less than 3V. Otherwise, please
refer to the above article (3).
（5）From the view point of protection, new battery pack should be motivated before usage.
That is to charge and discharge 3-5 times, but discharge is not less than the level of 70%
saturation. This process will make the battery lifetime longer and voltage more stable.
Description of WIFI Live Stream Camera Version
(PIC.1)
1.Download the app: from App Store /
Google Play.
2. Power on the drone.
3. Go to the WIFI setting on phone/device,
choose the WIFI signal of the drone (A8-AM+No.) , and connect it.
4. Now open the App of the drone, then select the Language “EN” (Pic.1).
5. Select the item and click “Connecting devices”.
Attention: When the drone has low power, it might unable to be connected
successfully.
How to connect the WIFI Signal
14.Disclaimer
Please read this manual carefully before using our product.
This product is not recommended for people under the age of 14. By using this product,
you hereby agree to this disclaimer and signify that you have read it fully. You agree
that you are responsible for your own conduct and any damage caused while using
this product, and its consequences. You agree to use this product only for purposes
that are proper and in accordance with local regulations, terms and all applicable
polices and guidelines ATTOP may make available.

16 17
1.Gestureto take pictures
2.Background Music
3.Speed mode: 30%,60%,100%
4.360° Stunt
5.Headless mode
6.Gravity Control
7.Path Plan
8.Voice Control
9.VR Mode
10.Home page
11.On/Off for interface
12.Take video
13.Take picture
14.One key take off
15.One key landing
16.Calibration
17.Ascend
18.Descend
19.Turn Left
20.Turn Right
21.Left Joystick
22.Forward/Backward trimming
23.Forward
24.Backward
25.Left sideward
26.Right sideward
27.Right Joystick
28.Sideward trimming
29.Emergency Stop
1 2 3 4 5 6 7 8 9 10
11
12
13
14
17
18
19 21 27 20
23
24
25
22
28
29
2615
16
(PIC. 2)
Name of App：W FPV
11
16
14
13
12
15
Apply to IOS \ Android system (Note: Apply to Android 2.3 or above
such as SAMSUNG, SONY, HUAWEI and etc.
But cannot guarantee the phone of other brands with Android system
could operate stably.)
11
12
13
15
14
16
Operation way
Control with your device.
1. After connecting the WIFI signal and entering into the app interface,
press the “on/off button” to open it.
2. Wait 2 seconds then lights of drone stop flashing, then press the
“Calibration button” to calibrate the drone if first time play.
3. Push the left throttle up to top, and then the rotors of the drone start rotating,
that unlock the motors. (see Pic 2).
4. Press the “One key take off” to fly up the drone (or push up the throttle
directly), then play.
Press the “One key landing” (or keep pushing down the throttle directly)
to land the drone.
5. Press the “Video” button on interface, to take video.
Press the “Picture”button on interface, to take picture.
After taking you can review the files from the “Gallery” in Home page,
or from your album file of your device.
Control with the remote controller
1. Power on the drone and power on the controller,
after pairing between the controller and drone
(the lights of the drone and controller are turning
solid), then connect the WIFI signal between
your device and the drone.
2. Put the device to the clamp of the controller,
then click “Connecting devices”.
3. Press the “Picture”button on interface or on
controller, to take picture.
Press the “Video” button on interface or on controller,
to take video.
After taking you can review the files from the “Gallery” in Home page,
or from your album file of your device.
18
30-Day Whole Unit Warranty For Quality-Related Issue
For 30 days after the date of purchase, we take care of all quality-related
issues with a REPLACEMENT.
Reminder : Be sure to operate your drone as directed.
90-Day Accessories Warranty For Any Reason
For 90 days after the date of purchase, we take care of all accessories
quality-related issues with an ACCESSORY REPLACEMENT.
Reminder: Be sure to maintain your drone as directed.
Customer Service Email : [email protected]
www.attoptoys.com