Navoto Hessler User manual

SAFETY INSTRUCTIONS
For your safety please read the instructions completely before
connecting, operating or adjusting this product.
WARNINGS
•The plug-socket combination must be installed and accessible near the
equipment at all times because it serves as the main disconnecting device.
•Connect the Navoto GSM adapter to private branch exchange (PBX) only.
•Do not work on the system or connect or disconnect cables during periods
of lightning activity.
•Use caution when connecting cables.
•Disposal of this product should be handled according to all national laws
and regulations.
•Modifications to this product not authorized by U.G.I Telecom Ltd (Navoto)
could void the CE/FCC approval and negate your authority to operate the
product.
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE
COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS
MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,
INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO
BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR
APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED
WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE
INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE
INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO
LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR
U.G.I Telecom Ltd (Navoto) REPRESENTATIVE FOR A COPY.
SAFETY INSTRUCTIONS (cont.)
To ensure general safety, follow these guidelines:
•Read the installation instructions before you connect the
system to its power source.
•Do not get this product wet or pour liquids into this device.
•Do not open or disassemble this product.
•Do not perform any action that creates a potential hazard to people or
makes the equipment unsafe.
•Use only the power supply that comes with the U.G.I Telecom Ltd
(Navoto) Adapter.
SYSTEM REQUIREMENTS
Components List
•Navoto GSM Gateway
•GSM Antenna
•USB cable
•RJ11 Cable
•Switching Power Supply
Phone Hardware Requirements
•Analog Telephone (or cordless phone) with DTMF (dual-tone multi-
frequency signaling) touch-tone dialing
•Mobile GSM SIM card
Computer System Requirements
•Windows® XP, Vista or 7; supports 32- and 64-bit operating systems
•Processor minimum: Core 2 Duo Processor 1.8 GHz or faster
•2 GB RAM
•Available USB Port Type A interface (1.0, 1.1, 2.0)
•Latest Navoto version installed (download from www.navoto.com)
•Available hard drive space 128 MB minimum (note: space required for
your Navoto software will vary based on your Skype™ contact list size
and usage.)
•Latest Skype version installed (download from www.skype.com)
•Internet high speed connection. We recommend a Broadband LAN
connection for best Skype results with high-speed broadband connection
of at least 4Mbps down / 512kbps for best quality.
*Skype is a registered trade mark of Skype Limited. No Emergency calls with
Skype. Skype is not a replacement for your telephone and can’t be used for emergency
calling.

ASSEMBLY & INSTALLATION
1. Connect analog phone to the Navoto GSM Gateway using the
phone’s RJ11 cable.
2. Connect the Navoto GSM Gateway to the PBX phone extension line
using the provided RJ11 cable.
3. Insert the SIM into the Navoto GSM Gateway.
4. Connect antenna to the “antenna socket”.
5. Plug the Navoto GSM Gateway into the electric outlet.
6. Connect the Navoto GSM Gateway to the computer with the USB
cable. The computer should discover the new hardware device.
There is no need for additional drivers; the Generic USB Audio
Device is compatible with Windows.
Be patient as the process can take a few minutes before you’ll see
the “Your new hardware is installed” message.
7. Once the hardware is ready to use, download and install the software
(at www.navoto.com), following the instructions that display on the
screen.
ASSEMBLY DIAGRAM
Navoto GSM Gateway
Safety Instructions &
Quick Start User Guide
Navoto
Paldi 11
Rehovot 76248 Israel
[phone]
suppor[email protected]
http://Navoto.com
Copyright © 2012 U.G.I Telecom Ltd., all rights reserved. No part of this
document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose without the express written
permission of U.G.I Telecom Ltd (Navoto).