Naya Tally 280 User manual

1
Users’ Manual

2
Function
①ON/OFF
Turn or turn off the tally light. “ON”indicates turn on the tally light, and “OFF”
indicates turn off the tally light.
②Menu
Push the “Menu” button to enter a menu setting. Push again to switch to the next
menu setting. The menu setting includes lightness setting, ID setting, channel
setting, etc.

3
Function
③Modify
In standby mode, push the “Modify” button to display power status. In menu setting
mode, push “Modify” button to set present menu data.
④Screen
Display the tally light ID, power status and setting information. The display contents
are listed below.
(1) The tally light ID. The screen will always display the tally light ID under the work
conditions.
(2) The power status. There are 5 degrees of power status. 01 indicates the lowest
power and 05 indicates the highest power. The screen will display power status
instead of display the tally light ID with low power.
(3) Brightness degree setting. There are 10 brightness degrees from 01 to 10. 10
indicates the maximum brightness.
(4) Tally light ID setting. There are 32 IDs from 01 to 32.
(5) Channel setting. There are 89 channels from 02 to 90.

4
Function
⑤Charging Indicator
The charging indicator includes 4 blue lights. When the tally light is under charging,
the blue lights will flicker in sequence. All the 4 blue lights will be lit up once get fully
charged.
⑥Sleep Mode Indicator
The sleep mode indicator is a blue light. Turn on the tally light, it will enter sleep
mode if unable to detect the base station signal. In sleep mode, the screen will be
closed and the sleep mode indicator will be lit up. It will exit sleep mode once
detecting the base station signal. The screen will display the tally light ID, and the
sleep mode indicator will be turned off under work condition.
⑦Charging Interface
Please charge the tally light with standard charger. The voltage and current is
5V/500mA.

5
Function
⑧TALLY Signal Output
Tally signal output interface is 3.5mm socket, which is compatible with various
monitor screen tally interface. Please contact factory for the output connection
cable. The specifications of 3.5mm socket are listed below.
The connection types include external power supply and internal power supply.
The specifications are listed below.
Map 1 External power supply sketch map (Voltage ≤24V and current ≤50mA)
Map 2 Internal power supply sketch map (Voltage 3.5V-4.2V and current ≤50mA)

6
Please read the users’ manual carefully before operation
Welcome to visit our website www.nayatec.com
Manufacturer: Shanghai Naya Intelligence Technology Co., Ltd.
Address: 7001 Zhongchun Rd. Minhang District, Shanghai, China.

7
Setting
①Brightness Setting
In standby mode, push the “Menu” button only once to enter brightness setting
menu. The flickering number indicates brightness degree. Push the “Modify” button
to adjust brightness grade. Just wait for 5 seconds or push the “Menu” button 3
times to save and exit setting. There are 10 brightness grades from 01 to 10.
②Tally light ID Setting
In standby mode, push the “Menu” button twice to enter tally light ID setting menu.
The flickering number indicates tally light ID. Push the “Modify” button to change
tally light ID. Just wait for 5 seconds or push the “Menu” button twice to save and
exit setting. There are 32 tally light IDs from 01 to 32.
③Channel Setting
In standby mode, push the “Menu” button 3 times to enter channel setting menu.
The flickering number indicates channel. Push the “Modify” button to change tally
light ID. Just wait for 5 seconds or push the “Menu” button only once to save and
exit setting. There are 89 channels from 02 to 90.

8
Connection
Wireless Tally Lights

9
Maintenance and Cleaning
Please read the following contents carefully in order for smoothly operation, long
service life, better daily maintenance and cleaning.
Maintenance
 Do not use hard material to puncture or scrape device.
 Do not put device in hard corrosive environment that may damage circuits.
Cleaning
 Please wipe the dust on the device with clean dry towel or brush.

If the device is dirty, please clean with neutral detergent and non-woven
fabric, do not use detergent, alcohol, spray and other chemical agents to
avoid the damage of the device. Make sure that the device is dry thoroughly
before using.

10
Quality Commitment and Maintenance Terms
We promises warranty services for material and manufacturing process defect
under normal operation since purchase date.
1. Warranty Scope and Duration
12 months
2. Warranty Claim
You have to provide product warranty card or valid purchase invoice to apply
repair. The product mark should be kept clean and intact during the warranty
period.
Warranty Card
In order to protect your benefits, please fill in the following table carefully and
keep it properly as a evidence for maintenance.
Dealer’s information
Product model
Date of sale
Dealer’s name
Contact number
User’s information
User’s name
Contact number
Address
E-mail

11
Shanghai Naya Intelligence Technology Co., Ltd
www.nayatec.com