NEC LCD2335WXM - MultiSync - 23" LCD TV User manual
LCD2335WXM
TM
To learn about other special offers, register online at www.necmitsubishi.com/productregistration
Important Information ................................................................................................................................................................ 1
Safety Precautions, Maintenance,& Recommended Use ....................................................................................................... 2
Contents ........................................................................................................................................................................................... 3
Component Names and Functions
Main Unit ........................................................................................................................................................................... 4
Remote Control ................................................................................................................................................................ 5
Installation Instructions
Viewing Angle Adjustment ............................................................................................................................................ 7
Detaching Main Body From Stand ............................................................................................................................... 7
Interface For Arm Applications ................................................................................................................................... 7
Connecting to a Antenna/Cable .................................................................................................................................. 8
Connecting to a Video Components ........................................................................................................................... 9
Connecting to a PC .......................................................................................................................................................... 10
Operating Instructions
Turning Power On and Off .............................................................................................................................................. 11
Volume Adjustment ........................................................................................................................................................ 12
Picture Parameters ......................................................................................................................................................... 13
PC Parameters .................................................................................................................................................................. 14
Channel Setting ............................................................................................................................................................... 15
Aspect ................................................................................................................................................................................ 17
Picture-in-Picture .......................................................................................................................................................... 18
Other Functions ............................................................................................................................................................... 22
Parental Controls ............................................................................................................................................................ 23
General Settings .............................................................................................................................................................. 26
Captions Menu ................................................................................................................................................................. 27
Features ........................................................................................................................................................................................... 28
Troubleshooting .............................................................................................................................................................................. 29
References ....................................................................................................................................................................................... 33
Specifications.................................................................................................................................................................................. 34
Limited Warranty ........................................................................................................................................................................... 35
TCO’99 ............................................................................................................................................................................................. 36
Information importante .............................................................................................................................................................. 39
Consignes de sécurité, entretien et utilisation recommandée ........................................................................................ 40
Contenu ............................................................................................................................................................................................ 41
Noms et fonctions des composants
Appareil principal ........................................................................................................................................................... 42
Télécommande ................................................................................................................................................................ 43
Instructions d’Installation
Ajustement de l’angle de visionnement ................................................................................................................... 45
Dégager lecorps principal du support ...................................................................................................................... 45
Interface pour des applications des bra ................................................................................................................... 45
Brancher le câble/antenne ......................................................................................................................................... 46
Brancher le composantes vidéo .................................................................................................................................. 47
Brancher à un PC .............................................................................................................................................................. 48
Instructions de fonctionnement
Mettre sous tension et hors tension .......................................................................................................................... 49
Réglage du volume .......................................................................................................................................................... 50
Paramèters de d’ image ................................................................................................................................................ 51
Paramèters de PC ............................................................................................................................................................. 53
Réglage des canaux ....................................................................................................................................................... 54
Aspect ................................................................................................................................................................................ 55
Image dans image ........................................................................................................................................................... 56
Autres Functions ............................................................................................................................................................. 60
Contrô les parentaux .................................................................................................................................................... 61
Paramètres généraux .................................................................................................................................................... 64
Menu des sous-titres ...................................................................................................................................................... 65
Caractéristiques ............................................................................................................................................................................ 66
Dépannage ....................................................................................................................................................................................... 67
Références ...................................................................................................................................................................................... 71
Specifications.................................................................................................................................................................................. 72
Garantie Limitée ............................................................................................................................................................................ 73
TCO’99 ............................................................................................................................................................................................. 74
IndeInde
IndeInde
Indexx
xx
x
1
Important Information
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-
tions.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2
No. 60950-1.
FCC Information
1.
Use the attached specified cables with the MultiSync
®
LCD2335WXM
TM
(
L234GC) color monitor so as not to interfere with radio
and television reception.
(1)
Please use the supplied power cord or equivalent to ensure FCC compliance.
(2) Please use the supplied shielded video signal cable, 15-pin mini D-SUB to 15-pin mini D-SUB.
(3) Please use the supplied AC adapter.
Use of other cables and adapters may cause interference with radio and television reception.
2.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The
user may find the following booklet, prepared by the Federal Communications Commission, helpful: ”How to Identify and Resolve
Radio-TV Interference Problems.“ This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402,
Stock No. 004-000-00345-4.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY
DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore,
it should be read carefully in order to avoid any problems.
WARNING
CAUTION
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
U vÊÌiÊÌÀÊ>ÃÊLiiÊiÝ«Ãi`ÊÌÊÀ>ÊÀÊÜ>ÌiÀ°
U vÊÌiÊÌÀÊ>ÃÊLiiÊ`À««i`ÊÀÊÌiÊV>LiÌÊ`>>}i`°
U vÊÌiÊÌÀÊ`iÃÊÌÊ«iÀ>ÌiÊÀ>ÞÊLÞÊvÜ}Ê«iÀ
>Ì}ÊÃÌÀÕVÌð
,iVi`i`Ê1Ãi
1/"
",,/Ê* /Ê Ê1-/ /Ê"Ê/Ê" /",
Ê,1Ê9]Ê-"1,Ê Ê Ê/1°Ê
/Ê""7 Ê7 Ê9"1Ê*"-/" Ê/Ê" /",\
U ÀÊ«ÌÕÊ«iÀvÀ>Vi]Ê>ÜÊÓäÊÕÌiÃÊvÀÊÜ>ÀÕ«°
U ,iÃÌÊÞÕÀÊiÞiÃÊ«iÀ`V>ÞÊLÞÊvVÕÃ}ÊÊ>ÊLiVÌÊ>ÌÊi>ÃÌ
ÓäÊviiÌÊ>Ü>Þ°ÊÊvÌi°
U *ÃÌÊÌiÊÌÀÊ>ÌÊ>Êä¤Ê>}iÊÌÊÜ`ÜÃÊ>`ÊÌiÀÊ}Ì
ÃÕÀViÃÊÌÊâiÊ}>ÀiÊ>`ÊÀiviVÌð
U i>ÊÌiÊÊÌÀÊÃÕÀv>ViÊÜÌÊ>ÊÌvÀii]Ê>LÀ>ÃÛi
VÌ°ÊÛ`ÊÕÃ}Ê>ÞÊVi>}ÊÃÕÌÊÀÊ}>ÃÃÊVi>iÀ°
U `ÕÃÌÊÌiÊÌÀ½ÃÊLÀ}ÌiÃÃÊ>`ÊVÌÀ>ÃÌÊVÌÀÃÊÌÊi
>ViÊÀi>`>LÌÞ°
U Û`Ê`ë>Þ}ÊvÝi`Ê«>ÌÌiÀÃÊÊÌiÊÌÀÊvÀÊ}Ê«iÀ
`ÃÊvÊÌiÊÌÊ>Û`Ê>}iÊ«iÀÃÃÌiViÊ>vÌiÀ>}iÊivviVÌî°
U iÌÊÀi}Õ>ÀÊiÞiÊViVիð
U /iÊ>«ÊvÊL>V}ÌÊVÌ>ÃÊiÀVÕÀÞ°ÊÊ*i>ÃiÊ>`iÊÌÊ>«
«À«À>ÌiÞÊÊV>ÃiÊvÊ`ëÃ>°
À}VÃ
/ÊÀi>âiÊÌiÊ>ÝÕÊiÀ}VÃÊLiivÌÃ]ÊÜiÊÀiVi`ÊÌi
vÜ}\
U 1ÃiÊÌiÊ«ÀiÃiÌÊ-âiÊ>`Ê*ÃÌÊVÌÀÃÊÜÌÊÃÌ>`>À`
Ã}>Ã
U 1ÃiÊÌiÊ«ÀiÃiÌÊÀÊ-iÌÌ}
U 1ÃiÊÌiÀ>Vi`ÊÃ}>ÃÊÜÌÊ>ÊÛiÀÌV>ÊÀivÀiÃÊÀ>ÌiÊLiÌÜii
xnÈÓâ
U ÊÌÊÕÃiÊ«À>ÀÞÊVÀÊLÕiÊÊ>Ê`>ÀÊL>V}ÀÕ`]Ê>ÃÊÌÊÃ
`vvVÕÌÊÌÊÃiiÊ>`Ê>ÞÊ«À`ÕViÊiÞiÊv>Ì}ÕiÊÌÊÃÕvvViÌ
VÌÀ>ÃÌ
ÀÊÀiÊ`iÌ>i`ÊvÀ>ÌÊÊÃiÌÌ}ÊÕ«Ê>Êi>ÌÞÊÜÀ
iÛÀiÌ]ÊÜÀÌiÊÌiÊiÀV>Ê >Ì>Ê-Ì>`>À`ÊvÀÊÕ>
>VÌÀÃÊ}iiÀ}ÊvÊ6ÃÕ>Êë>ÞÊ/iÀ>Ê7ÀÃÌ>ÌÃÊq
--Ê-Ì>`>À`Ê °Ê£ää£nnÊqÊ/iÊÕ>Ê>VÌÀÃÊ-V
iÌÞ]ÊV°Ê*°"°ÊÝÊ£ÎÈ]Ê->Ì>ÊV>]Ê>vÀ>Êä{äÈ°
i>}ÊÌiÊÊ*>i
U 7iÊÌiʵÕ`ÊVÀÞÃÌ>Ê«>iÊÃÊÃÌ>i`ÊÜÌÊ`ÕÃÌÊÀÊ`ÀÌ]
ÊÊÊÊÊÊ«i>ÃiÊÜ«iÊÜÌÊÃvÌÊVÌÊ}iÌÞ°
U *i>ÃiÊ`ÊÌÊÀÕLÊÌiÊÊ«>iÊÜÌÊ>À`Ê>ÌiÀ>°
U *i>ÃiÊ`ÊÌÊ>««ÞÊ«ÀiÃÃÕÀiÊÌÊÌiÊÊÃÕÀv>Vi°
U *i>ÃiÊ`ÊÌÊÕÃiÊ"ÊVi>iÀÊÌÊÜÊV>ÕÃiÊ`iÌiÀÀ>ÌÊÀ
ÊÊÊÊÊÊ`ÃVÀÊÊÌiÊÊÃÕÀv>Vi°
i>}ÊÌiÊ>LiÌ
U 1«Õ}ÊÌiÊ«ÜiÀÊÃÕ««Þ
U iÌÞÊÜ«iÊÌiÊV>LiÌÊÜÌÊ>ÊÃvÌÊVÌ
U /ÊVi>ÊÌiÊV>LiÌ]Ê`>«iÊÌiÊVÌÊÜÌÊ>ÊiÕÌÀ>Ê`iÌiÀ
ÊÊÊÊÊÊÊ}iÌÊ>`ÊÜ>ÌiÀ]ÊÜ«iÊÌiÊV>LiÌÊ>`ÊvÜÊÜÌÊ>Ê`ÀÞÊVÌ°
"/\Ê>ÞÊ«>ÃÌVÃÊ>ÀiÊÕÃi`ÊÊÌiÊÃÕÀv>ViÊvÊÌiÊV>LiÌ°
"Ê "/ÊVi>ÊÜÌÊLiâii]ÊÌiÀ]Ê>>iÊ`iÌiÀ}iÌ]Ê>V
VÊÃÞÃÌiÊ`iÌiÀ}iÌ]Ê}>ÃÃÊVi>iÀ]ÊÜ>Ý]Ê«ÃÊVi>iÀ]
Ã>«Ê«Ü`iÀ]ÊÀÊÃiVÌV`i°ÊÊÌÊÌÕVÊÀÕLLiÀÊÀÊÛÞÊÌÊÌiÊ
V>LiÌÊvÀÊ>Ê}ÊÌi°Ê/iÃiÊÌÞ«iÃÊvÊvÕ`ÃÊ>`Êv>LÀVÃÊV>ÊV>ÕÃiÊ
ÌiÊ«>ÌÊÌÊ`iÌiÀÀ>Ìi]ÊVÀ>VÊÀÊ«ii°
->viÌÞÊ*ÀiV>ÕÌÃÊ>`Ê>Ìi>Vi
",Ê"*/1Ê*,", ]Ê*-Ê "/Ê/Ê""7
7 Ê-// Ê1*Ê Ê1- Ê/ÊÓÎÎx78Ê"",Ê"
/",\
U "Ê "/Ê"* Ê/Ê" /",°Ê/iÀiÊ>ÀiÊÊÕÃiÀÊÃiÀÛVi
>LiÊ«>ÀÌÃÊÃ`iÊ>`Ê«i}ÊÀÊÀiÛ}ÊVÛiÀÃÊ>ÞÊiÝ«Ãi
ÞÕÊÌÊ`>}iÀÕÃÊÃVÊ>â>À`ÃÊÀÊÌiÀÊÀÃðÊ,iviÀÊ>ÊÃiÀ
ÛV}ÊÌʵÕ>vi`ÊÃiÀÛViÊ«iÀÃi°
U ÊÌÊëÊ>ÞʵÕ`ÃÊÌÊÌiÊV>LiÌÊÀÊÕÃiÊÞÕÀÊÌÀ
i>ÀÊÜ>ÌiÀ°
U ÊÌÊÃiÀÌÊLiVÌÃÊvÊ>ÞÊ`ÊÌÊÌiÊV>LiÌÊÃÌÃ]Ê>ÃÊÌiÞ
>ÞÊÌÕVÊ`>}iÀÕÃÊÛÌ>}iÊ«ÌÃ]ÊÜVÊV>ÊLiÊ>ÀvÕÊÀ
v>Ì>ÊÀÊ>ÞÊV>ÕÃiÊiiVÌÀVÊÃV]ÊvÀiÊÀÊiµÕ«iÌÊv>ÕÀi°
U ÊÌÊ«>ViÊ>ÞÊi>ÛÞÊLiVÌÃÊÊÌiÊ«ÜiÀÊVÀ`°Ê>>}iÊÌ
ÌiÊVÀ`Ê>ÞÊV>ÕÃiÊÃVÊÀÊvÀi°
U 1ÃiÊÌiÊÃÕ««i`ÊÊ>`>«ÌiÀ°ÊÊÌÊ«>ViÊ>ÞÊLiVÌÃÊÌÊÌi
Ê>`>«ÌiÀÊ>`Ê`ÊÌÊÕÃiÊÌiÊÊ>`>«ÌiÀÊÕÌ`Àð
U ÊÌÊ«>ViÊÌÃÊ«À`ÕVÌÊÊ>Êë}ÊÀÊÕÃÌ>LiÊV>ÀÌ]ÊÃÌ>`
ÀÊÌ>Li]Ê>ÃÊÌiÊÌÀÊ>ÞÊv>]ÊV>ÕÃ}ÊÃiÀÕÃÊ`>>}iÊÌ
ÌiÊÌÀ°
U 7iÊ«iÀ>Ì}ÊÌiÊÓÎÎx78ÊÌÀÊÜÌÊÌÃÊÊÓÓä
Ó{ä6Ê«ÜiÀÊÃÕ««Þ]ÊÕÃiÊ>Ê«ÜiÀÊÃÕ««ÞÊVÀ`ÊÌ>ÌÊ>ÌViÃÊÌi
«ÜiÀÊÃÕ««ÞÊÛÌ>}iÊvÊÌiÊÊ«ÜiÀÊÕÌiÌÊLi}ÊÕÃi`°Ê/i
«ÜiÀÊÃÕ««ÞÊVÀ`ÊÞÕÊÕÃiÊÕÃÌÊ>ÛiÊLiiÊ>««ÀÛi`ÊLÞÊ>`
V«ÞÊÜÌÊÌiÊÃ>viÌÞÊÃÌ>`>À`ÃÊvÊÞÕÀÊVÕÌÀÞ°Ê/Þ«iÊäx66
ÊÎÊ£ÓÊÃÕ`ÊLiÊÕÃi`ÊÊÕÀ«i®
U Ê1]ÊÕÃiÊ>Ê->««ÀÛi`Ê«ÜiÀÊVÀ`ÊÜÌÊ`i`Ê«Õ}Ê>Û
}Ê>ÊL>VʣήÊvÕÃiÊÃÌ>i`ÊvÀÊÕÃiÊÜÌÊÌÃÊÌÀ°ÊvÊ>
«ÜiÀÊVÀ`ÊÃÊÌÊÃÕ««i`ÊÜÌÊÌÃÊÌÀ]Ê«i>ÃiÊVÌ>VÌ
ÞÕÀÊÃÕ««iÀ°
U ÊÌÊ«>ViÊ>ÞÊLiVÌÃÊÌÊÌiÊÌÀÊ>`Ê`ÊÌÊÕÃiÊÌi
ÌÀÊÕÌ`Àð
U /iÊÃ`iÊvÊÌiÊvÕÀiÃViÌÊÌÕLiÊV>Ìi`ÊÜÌÊÌiÊ
ÌÀÊVÌ>ÃÊiÀVÕÀÞ°
U ÊÌÊLi`ÊÌiÊ«ÜiÀÊVÀ`°
U ÊÌÊÕÃiÊÌÀÊÊ}ÊÌi«iÀ>ÌÕÀi]ÊÕ`]Ê`ÕÃÌÞ]ÊÀÊÞ
>Ài>ð
U vÊÌiÊ}>ÃÃÊÃÊLÀi]Ê>`iÊÜÌÊV>Ài°
U ÊÌÊVÛiÀÊÌiÊÛiÌÃÊÊÌÀ°
U vÊÌÀÊÀÊ}>ÃÃÊÃÊLÀi]Ê`ÊÌÊViÊÊVÌ>VÌÊÜÌÊÌi
µÕ`ÊVÀÞÃÌ>Ê>`Ê>`iÊÜÌÊV>Ài°
U ÜÊ>`iµÕ>ÌiÊÛiÌ>ÌÊ>ÀÕ`ÊÌiÊÌÀÊÃÊÌ>ÌÊi>ÌÊV>
«À«iÀÞÊ`Ãë>Ìi°ÊÊÌÊLVÊÛiÌ>Ìi`Ê«i}ÃÊÀÊ«>Vi
ÌiÊÌÀÊi>ÀÊ>ÊÀ>`>ÌÀÊÀÊÌiÀÊi>ÌÊÃÕÀViðÊÊÌÊ«ÕÌ
>ÞÌ}ÊÊÌ«ÊvÊÌÀ°
U /iÊ«ÜiÀÊV>LiÊViVÌÀÊÃÊÌiÊ«À>ÀÞÊi>ÃÊvÊ`iÌ>V}
ÌiÊÃÞÃÌiÊvÀÊÌiÊ«ÜiÀÊÃÕ««Þ°Ê/iÊÌÀÊÃÕ`ÊLiÊ
ÃÌ>i`ÊVÃiÊÌÊ>Ê«ÜiÀÊÕÌiÌÊÜVÊÃÊi>ÃÞÊ>VViÃÃLi°
U >`iÊÜÌÊV>ÀiÊÜiÊÌÀ>ëÀÌ}°Ê->ÛiÊÌiÊ«>V>}}ÊvÀ
ÌÀ>ëÀÌ}°
U *i>ÃiÊvÜÊÌiÊLÞ>ÜÃÊÀÊÀÕiÃÊvÊÞÕÀÊÕV«>ÌÞÊÌ
`ëÃiÊvÊÌiÊÌÕLiÊ«À«iÀÞ°
U ii«ÊÌiÊiÃÊÊÌiÊL>VÊvÊÌiÊÊVi>ÊvÊ`ÀÌÊ>`Ê`ÕÃÌ°
ÌÊÃÊÀiVi`i`ÊÌÊÜ«iÊiÃÊÜÌÊ>ÊÃvÌÊVÌÊ>ÊÕÊv
ViÊ«iÀÊÞi>À°
1/"
i`>ÌiÞÊÕ«Õ}ÊÞÕÀÊÌÀÊvÀÊÌiÊÜ>ÊÕÌiÌÊ>`ÊÀiviÀ
ÃiÀÛV}ÊÌʵÕ>vi`ÊÃiÀÛViÊ«iÀÃiÊÕ`iÀÊÌiÊvÜ}
V`ÌÃ\
U 7iÊÌiÊ«ÜiÀÊÃÕ««ÞÊVÀ`ÊÀÊ«Õ}ÊÃÊ`>>}i`°
U vʵÕ`Ê>ÃÊLiiÊëi`]ÊÀÊLiVÌÃÊ>ÛiÊv>iÊÌÊÌi
ÌÀ°
3
CC
CC
*Remember to save your original box and packing material to transport or ship the monitor.
Your new NEC MultiSync®LCD2335WXM
TM
monitor box* contains the following items:
• LCD monitor
• Power Cord
• AC Adapter
• Audio Cable
• Video Signal Cable – VGA to VGA
• User’s Manual
• Wireless Remote Control and AAA Batteries
• RF Cable
• Relay Connector
Power Cord
User’s Manual
Video Signal Cable
(D-SUB to D-SUB Cable)
Wireless Remote Control
and AAA Batteries
The following optional components are available to use with the LCD2335WXM. To obtain the optional components and
additional information, contact Customer Service at (800) 632-4662.
• Macintosh Cable Adapter
Audio Cable
AC Adapter
RF cable Relay connector
Contents
4
Main Unit
Front view of main body
1 Indicator for
Power
LED lights Green color --- Power is ON.
LED lights Orange --- Monitor is in "Power Saving Mode".
LED is off --- Power is OFF.
2 IR receiver IR receiver.
3 Power Turn on or off the main body.
4 Menu Open or Close the OSD menu.
5 Channel Select the next lower channel / higher channel (TV/AV mode) ; OSD function for selecting (PC mode).
6 Volume Lower / Raise the sound volume (TV/AV mode) ; OSD function for adjusting (PC mode).
7 Source Selection TV, AV-1(COMPOSITE), AV-2(S-VIDEO), AV3(YCbCr / YPbPr), AV4(YCbCr / YPbPr) ,
RGB1 PC or RGB2 DVI.
8 Enter Enter for adjusting or next page.
Rear view of main body
1 RF in Please connect to antenna or cable TV signal.
2 VGA input Please use the 15-pin VGA cable in the package
contents.
3 AV3-in For component Video input and audio.
4 AV1/2-in For composite video or S-video input and audio.
5 AV4-in For component Video input and audio.
6 PC Audio in Please connect the audio from sound card to PC
Audio in.
7 DC in Please connect to your 19V power supply.
8 DVI in Please use the DVI cable for signal input
9 Kensington
Lock hole It can be locked with Kensington lock.
10 Speaker -R Connect to Right-speaker
11 Speaker -L Connect to Left-speaker
12 Audio out For Audio R/L output & Subwoofer.
Component Names and Functions
5
Remote Control
Installing the Batteries Handling the Remote Control
1. Open the battery cover.
z
Slide back and remove the battery cover in
the direction of the arrow.
2. Installing the batteries.
z
Install two included Size AAA batteries
observing the correct polarities(+,-).
Use the remote control within about 16 feet from front of the unit’s remote-
control sensor and within 30 degrees on both sides.
3. Close the battery cover.
z
Replace the battery cover in the direction
of the arrow and snap it back into place.
z
Do not mix new and old batteries together. The batteries could explode or
leak, resulting in fires, physical injury, or stains.
z
When inserting batteries, observe their correct polarities as marked on the
product. If inserted in the wrong direction, the batteries could explode or leak,
resulting in fires, physical injury, or stains.
ATTENTION
z
Do not drop the remote control.
z
To avoid possible failures, do not splash the remote control with water
or put it on a wet object.
z
If leaving the remote control out of use for an extended period of time,
remove the batteries from it.
z
If the remote control does not respond properly, replace the batteries.
z
Strong light such as direct sunlight exposed on the photoreceptor of
the remote control can cause operational failure. Position this unit to
avoid direct contact with such light.
Within 30 degrees Within 30 degrees
About 10 feet About 10 feet
About 16 feet
CAUTION
LED INDICATION
POWER ON/OFF
SLEEP
CH-LOCK
PIP
STILL
VOLUME UP / DN (ST)
MENU
PROGRAM / ADJUST (X)
DISPLAY
AV2
ENTER
AV1
RGB-1VGA
TV TUNER
SOURCE SELECT
ZOOM
CCD (Close Caption Display)
SWAP
CH UP / DN (ST)
MUTE
LAST-CH
SELECT (ST)
MTS
NUMBER KEYPAD
AV3
AV4
RGB-2 DVI
PROGRAM / ADJUST (W)
ASPECT
Component Names and Functions
continued
6
Remote Control (continued)
SLEEP
Press this button to activate the Sleep
Timer menu.
Source
Press this button to select the INPUT
Source.
ZOOM
Press this button to change the
picture
SWAP
Press this button
to exchange main
picture with PIP picture.
STILL
Press this button to freeze the picture.
Press it again to return to normal
operation.
CH
Press these two buttons to select
the channel up or down.
MUTE
Press this button to turn off the sound.
Press it once more or press the
S
volume up button to return the sound.
MTS
Press this button to select Multi-
channel television sound. This button
operates only in the TV mode.
NUMBERS KEYPAD
Press these buttons to access the
corresponding TV channels.
AV3
Press this button to select the AV3
YCbCr / YPbPr INPUT.
AV4
Press this button to select the AV4
YCbCr / YPbPr INPUT.
POWER
Press this button to turn the TV on or
off
TV
Press this button to choose TV as the
source.
CH-LOCK
Press this button to select the V-chip
function.
PIP
Press this button to show the PIP and
change the size of PIP.
VOL
Press these two buttons to adjust the
volume u
p
or down
MENU
Press this button to select the
On Screen Display Menu.
DISPLAY
Press this button to show the input signal
information.
AV2
Press this button to select the S-VIDEO
INPUT.
AV1
Press this button to select the
COMPOSITE INPUT.
RGB1
Press this button to select the RGB1 VGA
INPUT.
RGB2
Press this button to select the RGB2 DVI
INPUT.
CCD
Press this button to show the Close
Caption menu.
LAST CH
Press this button to return to the last
Channel viewed.
ASPECT
Press this button to selcet how the picture
is displayed on the screen; 4:3,16:9,
Component Names and Functions
continued
7
Viewing Angle Adjustment
This product is designed to allow users to have a comfortable viewing angle.
The viewing angle can be adjusted from -5°to +20°.
Warning: Do not force the LCD Monitor over its maximum viewing angle as stated
above. Attempting this will result in damaging the Monitor and Monitor stand.
Detaching Main Body From Its Stand
Important: Place the monitor on a clean, flat surface that will not scratch the front
or glass surfaces of the display unit.
1. Remove the rear cover from rear stand assembly
2. Remove the 5 screws from the hinge bracket
3. Remove the stand from main body
1
2
Interface for Arm Applications
Before installing to mounting device, please refer to Fig.1-5.
The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts,
as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-
8. These specifications meet the VESA Flat Panel Monitor Physical Mounting
Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November
1997).
Note 1: Please using Ø 4mm x 8mm (L) screw for this application.
Note 2: The LCD monitor should only be used with an approved arm (e.g. GS
mark). To meet the safety requirements, the monitor must be mounted to an arm
which guaranties the necessary stability under consideration of the weight of the
monitor.
100mm
100mm
100mm x 100mm
Screw Mounting Options
4mm ,0.7pitch threaded holes x4
Installation Instructions
8
Connecting to a Antenna / Cable
Make sure that the power switch of the LCD MONITOR is turned off and that the unit is disconnected from the AC power source.
Precautions when connecting the antenna
z
Use a coaxial cable which is free from interference. Avoid using a parallel flat wire as interference may occur, causing the reception to become unstable and
noise to appear on the screen.
z
Avoid using an indoor antenna as this may be affected by interference and poor reception.
z
Keep the power cord as far away from the antenna wire as possible.
z
Auto Tuning please refer to page 24
VHF(300-Ohm) antenna / UHF antenna
When using a 300-ohm twin lead from an outdoor antenna, connect the VHF or UHF antenna leads to the screws of the VHF or UHF adapter. Plug
the 300-ohm to 75-ohm adapter into the antenna on the LCD MONITOR.
When both VHF and UHF antennas are combined
Attach an optional antenna cable signal combiner to the LCD MONITOR antenna terminal, and connect the cables to the antenna mixer. Consult your
local electronics retailer about available signal combiners.
Reconnect the unit to the AX power source and turn on the power.
Using the Remote Control or User Controls, select the "CHANNEL SETTING MENU". Select the appropriate menu based upon which source (cable
or antenna) is being used.
Refer to pages 15 and 16 for further information on the "CHANNEL SETTING MENU" as well as for information on how to use the "AUTO
PROGRAM" function to program available channels.
Monitor rear panel
Antenna
Installation Instructions
continued
9
Connecting to a Video Components
1. Make sure that the power switch of the LCD MONITOR is turned off.
2. Make sure that the power switch of the Video component is turned off.
Sound output
from PC
VGA output
from PC
Cable
A
ntenna
Adapter
DVD/VCR/LD/IRD
Camera
Video game
RCA A/V cable
S-VIDEO cable
Camera
Video game
DVD/VCR/LD/IRD
Audio Amp
S
et-Top Box
DVI output from PC
Applicable video signals for each input terminal
(See page 12 for details)
Terminal RCA DVI D-sub Remarks
Type Video (Composite) S-Video Component PC/STB RGB
AV1 {Refer to page12
AV2
{Refer to page 12
AV3
{
1080i/720P/480P/480i inputs.
Refer to page 12
AV4
{
1080i/720P/480P/480i inputs.
Refer to page 12
RGB1
{
Refer to page 12
RGB2
{
Refer to page 12
({: Available)
Installation Instructions
continued
10
Connecting to a PC
Choose an appropriate site and install the product on a level table where the stand is secure.
Ensure that a power socket is readily accessible near the place where you install the LCD MONITOR.
Make sure that the power switch of this device is turned off.
1. Make sure that the display signal of the personal computer to be used is compatible with the specifications of this device.
See "Product Specifications" concerning the specifications of this device.
2.Make sure that the power switch of the personal computer is turned off.
3.Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output terminal of the
personal computer.
z
Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
z
Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with the personal
computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer or ask the personal computer
manufacturer or your local retail.
Note
PREVENTION OF SCREEN BURN
Continuous on-screen display of fixed (non-moving) images, such as video games, stock market quotations,
computer generated graphics and other patterns can cause permanent damage to the LCD MONITOR.
Such "SCREEN BURN-IN" constitutes misuse and IS NOT COVERED by our Factory Warranty.
Subwoofer Output provides a single un-amplified audio output that passes along the audio signal from the LCD MONITOR.
Note: When using a Home Theater audio system with this LCD MONITOR, please connect the sub woofer (if originally supplied with the audio
system) directly to the Home Theater components subwoofer terminal.
DVI Connector
15 Pin D-sub
VGA
connector
Audio input
from PC.
Installation Instructions
continued
11
Turning Power On and Off
To turn the LCD MONITOR power ON/OFF, press the POWER
button or the ON/OFF button on the remote control.
The power lamp will light and turn to green, the LCD MONITOR
will turn on.
z
Note: During normal use, the main power switch is set in the ON position.
Power lamp
Power
lamp
Power
lamp Operation
Off Off
The OFF button on the remote control or
the POWER button is OFF.
Lights green On
When the power switch is ON, and the
ON button on the remote control or the
POWER button is ON.
Lights orange On When the power switch is ON, and the
PC is in power save mode.
When the indicator lamp lights orange or the message “No cable
connected” or “Going to sleep” appears on the screen, there is
something abnormal about the status of the reception.
See Trouble Shooting.
CAUTION
z
Avoid repeatedly turning the LCD MONITOR on and off at short time
intervals. Failures might result from doing so.
z
If a power failure occurs while the main unit is running, it will be powered
on upon recovery from the failure. To prevent the power from returning
unexpectedly, possibly causing damage, turn off the main power switch
when after power failure occurs. Unplug the AC power source to the AC
adapter for 30 seconds to reset the unit.
Power Lamp
POWER button
POWER
ON/OFF
button
Operating Instructions
12
Selecting AV Inputs
z
Input can be switched by pressing the AV1, AV2, AV3, AV4,
RGB1, or RGB2 buttons
z
Input can be switched in the sequence TVJAV1 JAV2JAV3
JAV4 JRGB1 VGAJRGB2 DVI by pressing the SOURCE
button and then select the Input with the select keys
STand then press the ENTER
button.To select a TV
station, press the TV button.
TV AV1 AV2 AV3
AV4
RGB1 VGARGB2 DVI
Volume Adjustment
The volume can be adjusted by pressing theSand Tbuttons
of the remote control.
z
When the volume buttons are pressed, the volume adjustment
status guide will be displayed.
z
The volume will increase when the VOL+ (or
S
) button is pressed while
the guide is being displayed.
z
The volume will decrease when the VOL- (or
T
) button is pressed while
the guide is being displayed.
Audio Mute
The audio volume can be temporarily muted by pressing the
MUTE button of the remote control.
When the MUTE button is pressed, the above icon will appear.
z
The volume setting can be lowered by pressing the VOL- button while
the audio is muted.
z
Muting can be cancelled by pressing the VOL+ button or the MUTE
button while the audio is muted.
Volume setting value
Adjustment status guide
VOLUME buttonsSOURCE button
TV SOURCE
VOLUME
control
MUTE
AV1, AV2, AV3
RGB1, RGB2,
AV4 buttons
Operating Instructions
continued
13
Main buttons:
1. PICTURE PARAMETERS MENU
2. PC PARAMETERS MENU
3. AUDIO SETTING MENU
4. PICTURE-in-PICTURE MENU
5. CHANNEL SETTING MENU
6. PARENTAL CONTROLS MENU
7. GENERAL SETTING MENU
Picture Parameters
0
BRIGHTNESS
CONTRAST
COLOR
TINT
COLOR TEMP
FLESHTONE
SHARPNESS
WARM
NORMAL
COOL
USER USER R
USER G
USER B
1. Press the “MENU” button to display the Main Menu screen.
2. Press the ENTER button to confirm then use the Sand TSELECT buttons to select the item to be adjusted and then use the
W
and
X
ADJUST
buttons to adjust the selected items.
Selected
characters
W
X
Setup hint
BRIGHTNESS
Black is subdued for increased overall
darkness.
Black is set to off for increased overall
brightness.
Adjust as desired.
CONTRAST
Narrows the gap between light and dark.
Broadens the gap between light and dark.
A
djust for maximum visibility to suit the
ambient brightness.
COLOR
Decrease color level.
Increase color level.
Adjust as desired.
TINT
Enhances red and weakens green.
Enhances green and weakens red.
Adjust as desired.
COLOR TEMP
Normally set to NORMAL .
FLESHTONE
ON
OFF
Set to ON for richer skin color.
SHARPNESS
SOFT
SHARP
Normally set to the “0” position; shift to the
minus (-) side for a softer picture and plus (+)
for a sharper picture.
Operating Instructions
continued
Note: Not all menus are available for every input source.
14
Operating Instructions
continued
Note: Not all menus are available for every input source.
PC Parameters
AUTO
CLOCK
PHASE
POSITION
YES
NO
Selected
characters
W
X
Setup hint
AUTO
Press the ENTER button to make the word “YES”
light on.
Normally set to NO mode. Adjust automatically for clock, phase, and
position.
CLOCK Reduces the dot clock. Increases the dot clock. Adjust for maximum character clarity.
PHASE Slows the dot clock Phase Advances the dot clock Phase Adjust for clear character visibility.
POSITION Press the PROGRAM button to adjust the display position Adjust the horizontal and vertical display positions.
Audio Setting
Selected
characters
W
X
Setup hint
BASS Decreases bass. Increases bass. Adjust as desired.
TREBLE Decreases treble. Increaes treble. Adjust as desired.
BALANCE Decreases right volume level. Increases left volume level. Adjust as desired.
15
Channel Setting
*Note: The TV must be in TV mode for access to this Menu.
When operating the TV at first time, its TV system is at “default factory mode” and this mode cannot display the image normally on the screen. In
order to watch the TV program without problem, please refer to the follow steps to setup the TV system accordingly for normally display
1.SYSTEM setting: Select between antenna or cable (STD / HRC / IRC) TV system
ANTENNA
CABLE
SELECT: ENTER: ADJUST: RETURN: MENU
ANTENNA
CABLE
ANTENNA
CABLE
TV 12
STD 12
STD
HRC
IRC
HRC 12
STD
HRC
IRC
IRC 12
STD
HRC
IRC
STD
HRC
IRC
CHANNEL EDIT
AUTO P ROGRAM
FINE TUNE
SYSTEM
2. Auto Program setting
AUTO PROGRAM:Auto search channels
SELECT: ENTER: ADJUST: RETURN: MENU
CHANNEL EDIT
AU T O P RO G RA M
FINE TUNE
SYSTEM
3.FINE TUNE setting
AUTO: Use AUTO function to fine tune screen
CHANNEL EDIT
AUTO PROGRAM
FINE TUNE
SYSTEM
AUTO
MENU
MANUAL: Use MANUAL function to fine tune screen
CHANNEL EDIT
AUTO PROGRAM
FINE TUNE
SYSTEM
AUTO
MENU
Operating Instructions
continued
Note: Not all menus are available for every input source.
16
Channel Setting (Continued)
4.Channel Edit setting
CHANNEL ADD: Change the OSD channel number from Red to Green
SELECT: ENTER: ADJUST: RETURN: MENU
12 12
CHANNEL DELETE:Change the OSD channel number from Green to Red
SELECT: ENTER: ADJUST: RETURN: MENU
12 12
Selected
characters
W
X
Setup hint
SYSTEM
IRCHRC
ANTENNA CABLE
CABLE STD
1.
2
.
1.Antenna or cable TV system selection.
2.If certain CABLE TV channels are poor or not-
possible in [STD] mode, select[HRC] or [IRC].
AUTO PROGRAM
Press Enter button to excute.
Auto program is Auto search channel with TV
FINE TUNE
AUTO MANUAL
1. Use AUTO function to fine tune screen.
2. Use MANUAL function to fine tune scrceen.
CHANNEL EDIT
ADD DELETE
1.Add function is add new channel with TV
2.Delete function is delete commercial channel for TV
Operating Instructions
continued
Note: Not all menus are available for every input source.
17
ASPECT
The ASPECT button will select how the video image appears on the
TV’s screen.
There are 4 selections.
16.9 Display a wide screen image.
4.3 Displays a 4:3 square picture with letterbox bands
PANORAMIC Stretches the picture to increase the size of
Images in the center of the picture.
CINEMA Magnifies the image to fill the screen with a picture.
CINEMA PANORAMIC
16:9 4:3
Note : For RGB1 VGA and RGB 2 DVI, you can select 4:3 and 16:9
aspect mode.
Note : For HDTV 1080i and 720p inputs (AV3 / AV4), you can select
4:3 and 16:9 aspect mode.
ZOOM
Each time the ZOOM button of the remote control is
Pressed, the image on the screen will be enlarged.
There are 10 selections, Zoom 0 (=Normal size ) to Zoom 9.
Note:ZOOM is available in 4:3 and 16:9 aspect mode.
Operating Instructions
continued
Note: Not all menus are available for every input source.
ZOOM
ASPECT
18
Picture-in-Picture
OFF
PIP
PBP
POP
AUDIO SOURCE
SMALL
MEDIUM
LARGE
PIP POSITION
MULTI 1+12
MULTI 1+3
MULTI 1+1
OFF
PIP
PBP
POP
AUDIO SOURCE
PIP function description
Selected WXSetup hint
OFF Press Enter button to turn off. Turn off Picture-in-Picture function
PIP POSITION
SMALL MEDIUM LARGE PIP POSITION
PIP Position:
Use the STbuttons to adjust pictures to the up or down positions.
Use the WXbuttons to adjust pictures to the right or left positions.
Change PIP display size & position.
PBP Press Enter button to turn on. Turn on Picture-by-Picture function
POP (MULTI 1+12) ÅÆ (MULTI 1+3) ÅÆ (MULTI 1+1) use the STbuttons to select the PIP setting.
AUDIO SOURCE MAIN PIP Select MAIN or PIP audio function.
Operating Instructions
continued
Note: Not all menus are available for every input source.
OFF
PIP
PBP
POP
AUDIO SOURCE
Other manuals for LCD2335WXM - MultiSync - 23" LCD TV
2
This manual suits for next models
1
Table of contents
Languages:
Other NEC Monitor manuals
NEC
NEC MultiSync V462-TM User manual
NEC
NEC LCD1760VM - MultiSync - 17" LCD Monitor User manual
NEC
NEC MultiSync LCD225WXM-BK User manual
NEC
NEC LCD8205 - MultiSync - 82" LCD Flat Panel... User manual
NEC
NEC MultiSync LCD4010 User manual
NEC
NEC LCD6520L-BK-AV - MultiSync - 65" LCD Flat Panel... User manual
NEC
NEC AccuSync LCD19WV User manual
NEC
NEC LCD1915X User manual
NEC
NEC LCD1525M - MultiSync - 15" LCD Monitor User manual
NEC
NEC NEC MultiSync LCD2110 LCD2110 LCD2110 User guide
NEC
NEC MultiSync EA224WMi User manual
NEC
NEC LCD2080UX - MultiSync - 20.1" LCD Monitor Guide
NEC
NEC MultiSync X981UHD-2 User manual
NEC
NEC MultiSync P750 User manual
NEC
NEC MultiSync L182R4 User manual
NEC
NEC MultiSync LCD1550VM User manual
NEC
NEC LCD1990SXP - MultiSync - 19" LCD Monitor Parts list manual
NEC
NEC MultiSync V652 User manual
NEC
NEC AS191 - AccuSync - 19" LCD Monitor User manual
NEC
NEC LCD1920NX BK - MultiSync - 19" LCD Monitor User manual
