NEC MultiSync 95F User manual

MultiSync 75F
MultiSync 95F
User’s Manual
UÏivatelská pfiíruãka
Bedienerhandbuch
Οδηγίες Χρήσης
Manual del usuario
Manuel Utilisateur
Manuale utente
Gebruikershandleiding
Podr´cznik u˝ytkowinka
Руководство пользователя
Kullan∂c∂ Klavuzu
00Cover_all.p65 09.10.2000, 13:39 Uhr1

00Cover_all.p65 09.10.2000, 13:39 Uhr2

English
âesky
Deutsch
Ελληνικά
Español
Français
Italiano
Nederlands
Polski
Русский
Türkçe
01b_XChapterOpener 09.10.2000, 13:39 Uhr1

01b_XChapterOpener 09.10.2000, 13:39 Uhr2

English-1
English
Declaration of the Manufacturer
We hereby certify that the colour monitors
MultiSync 75F (N0701)
MultiSync 95F (N9902)
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
and marked with
NEC-Mitsubishi Electric Visual Systems Corporation
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
01b_english 09.10.2000, 13:39 Uhr1

English-2
Contents
MultiSync monitor box* should contain the following:
•MultiSync Monitor
MultiSync 75F or MultiSync 95F
•Power cord
•Captive Signal Cable
•User‘s manual
•CD-ROM includes complete User‘s Manual in PDF format and
Windows related files (Inf file and color profile). To see the complete
User‘s Manual, Acrobat Reader 4.0 must be installed on your PC.
* Remember to save your original box and packing material to transport
or ship the monitor.
User’s Manual
Power Cord
Captive Signal Cable
01b_english 09.10.2000, 13:39 Uhr2

English-3
English
Quick Start
To attach the MultiSync monitor to your system,
follow these instruction:
1. Turn off the power to your computer and MultiSync monitor.
2. If necessary, install the display card. For more information, refer to the
display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal
cable to the connector of the display card in your system (Figure A.1)
Tighten all screws.
For the Mac: Connect the MultiSync 75F or 95F Macintosh Cable
Adapter (not included) to the monitor connector on the Macintosh
(Figure B.1). Attach the 15-pin mini D-SUB end of the captive signal
cable to the Macintosh cable adapter on the computer (Figure B.1).
Tighten all screws.
4. Connect one end of the power cord to the MultiSync monitor and the
other end to the power outlet (Figure C.1).
5. Turn on the monitor (Figure D.1) and the computer.
6. This completes the installation.
NOTE: If you have any problems, please refer to the
Troubleshooting section of this User‘s Manual.
Captive Signal Cable
15-pin-mini-D-SUB
Figure A.1
01b_english 09.10.2000, 13:39 Uhr3

English-4
Captive Signal Cable
Mac Adapter
(not included)
15-pin mini D-SUB
Figure B.1
Power Outlet
Power cord
Figure C.1
Figure D.1
01b_english 09.10.2000, 13:39 Uhr4

English-5
English
Controls
OSM (On-screen Manager) control buttons on the
front of the monitor function as follows:
SELECT Enters and exits the OSM menu.
CONTROL-/+ Selects one of the controls and decreases or increases
the adjustment.
RESET Resets the highlighted control to the factory setting.
Press -/+ button at the same time for approximately
1 sec.
BRIGHTNESS: Adjusts the overall image and background
screen brightness.
CONTRAST: Adjusts the image brightness in relation to the
background. (Contrast control is also effective with “-,+”
button even though OSM window is not visible.)
R Red Color Control: Adjust the red contrast of the display.
G Green Color Control: Adjust the green contrast of the
display.
B Blue Color Control: Adjust the blue contrast of the display.
Horizontal: Moves the image horizontally left or right.
Vertical position: Moves the image vertically up or down.
Horizontal size: Decreases or increases the horizontal size
of the image.
Vertical size: Decreases or increases the vertical size of the
image.
The Geometry controls allow you to adjust the curvature or angle of the
sides of your display.
Pincushion/Barrel: Decreases or increases the curvature of
the sides either inward or outward.
Trapezoid: Decreases or increases the bottom of the screen
to be the same as the top.
01b_english 09.10.2000, 13:39 Uhr5

English-6
Parallelogram: Decreases or increases the tilt of the sides
either to the left or right.
Bow (Pincushion Balance): Decreases or increases the
curvature of the sides either to the left or right.
Rotates: Rotates the image.
Degauss: Select the degauss icon on “Icon select window”
and push “SELECT”button. It will eliminate the stray
magnetic field and correct the scan of the electron beam,
which affect the purity, focus and convergence.
Note: Allow a minimum interval of 20 minutes to elapse
between uses of the degauss function.
9300K (75F) Color Temperature:
Select the Color Temperature icon on “Icon Select
Window”and push “SELECT”button.
9300 (95F) It can be switched to change the color Temperature.
(9300K, 7550K, 6550K, user)
OSM: There are 3 background colours (Blue, Black, and
white). These can be selected by “SELECT”button after the
selection of “OSM”on “Icon select window”.
exit (75F) EXIT: To exit OSM window. Select EXIT on “Icon select
window”, then push “SELECT”button.
MultiSync 95F
EXIT: To exit OSM window. Select ESC on “Icon select
window”, then push “SELECT”button.
Horizontal MoiréCanceler: Reduces horizontal moiré
levels.
Vertical MoiréCanceler: Reduces vertical moirélevels.
Note: If you do not push buttons within 10 seconds in
OSM condition, the window will automatically
disappear.
01b_english 09.10.2000, 13:39 Uhr6