NEC PlasmaSync 50XM3 User manual

NEC Solutions (America), Inc.
VisualSystems
50XM3/S (Residential Model) Installation Guide
50” Plasma Display v1.0
Contents
Product Description and Notes Page 1
Ventilation Requirements Page 2
www.necvisualsystems.com 50XM3/S Page 1 of 10
Display Dimensions
Front,Top&Bottom Page 3
Rear, Left & Right Side Page 4
Display Dimensions w/Optional Speakers and Stand Page 5
Dimensions w/Optional Flat Wall Mount Page 6
Dimensions w/Optional Tilt Wall Mount Page 7
Dimensions w/Optional Ceiling Mount Page 8
Connections Page 9
Control Codes Page 10
ProductDescription
Type: Plasma Display Screen Surface: Anti-Reflective
Resolution: 1365x768 ColorCorrection: NEC CCF (Capsulated Color Filter, in panel)
Aspect Ratio: 16:9 and AccuCrimson (in front filter)
FCC: ClassB Dimensions: 48.1”(W)x29.0”(H)x3.8”(D)
DVI Input: HDCP capable Weight: 96.6 lbs
Notes
 This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
 Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched
horizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
 Distances are in inches, for millimeters multiply by 25.4.
 Distances may vary ±5%.
MaximumTiltAngles
Below is the maximum angle that the display can be tilted
Max Tilt
Landscape 30°

Ventilation Requirements
Dimensions below are minimum required for proper ventilation.
WALL
WALL
WALL
2"
2"
2"
2"
2"
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the
opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for
design review and recommendations.
www.necvisualsystems.com 50XM3/S Page 2 of 10

Display dimensions
Power Button
Filter Surface
28.98
48.11
43.54 (Screen Area)
24.49 (Screen Area)
Speaker Terminal
Control Buttons
LED & IR
0.217
IR15.20
0.79
0.79
0.79
0.79
0.79 2.46 1.46
4.92
18.11 5.94
44.33
25.43
AC Inlet
20.55
50.00
www.necvisualsystems.com 50XM3/S Page 3 of 10

Display dimensions (cont.)
www.necvisualsystems.com 50XM3/S Page 4 of 10
Power Button
12°
20.87
3.78
3.78
for PC option
4-M4*10 MAX for mount option
8-M4*14 MAX
for speaker option
4.96 2.56 2.56 4.96
13.8813.960.59
0.91
0.216
48.11
1.50 2.28
1.59
0.66
0.405
0.205
25.75
28.98 21.693.64
0.217
0.469
3.90 4.02
10.28 7.91
17.52
4.08
4.21
1.30
1.93
3.07
5.89
7.15
8.25
9.51
10.22
10.93
11.63
12.34
13.13
13.68
14.27
14.86
15.49
16.16
16.89
9.849.84

Dimensions with optional speakers and stand
(Screen Area)
(Screen Area)
28.98
48.11
43.54
24.49
28.98
50.00
3.78
2.80 31.77
32.05
55.24
6.72 15.75
www.necvisualsystems.com 50XM3/S Page 5 of 10

Dimensions with optional Flat Wall Mount Kit (FWMK)
www.necvisualsystems.com 50XM3/S Page 6 of 10
16.0 4.0
4.0
24.012.0 12.1
11.15.912.0
2.5 3.8
Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2)
due to a higher center of gravity. (mount pattern is the same)

Dimensions with optional Tilt Wall Mount Kit (TWMK)
www.necvisualsystems.com 50XM3/S Page 7 of 10
Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2)
due to a higher center of gravity. (mount pattern is the same)
16.0
4.0 4.0
24.012.1 12.0
11.15.912.0
5.0 3.8
12.9
Depth at 15° Tilt

Dimensions with optional Ceiling Mount Kit (CMK)
0.23
24.3 23.8
8.0
Tilt Range: 0° - 15°
12.0
Tilt 15°
Tilt 0°
16.016.2 15.9
2.5
1.5
29.015.2
Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2)
due to a higher center of gravity. (mount pattern is the same)
www.necvisualsystems.com 50XM3/S Page 8 of 10

Connections
DVI Input is HDCP capable
VIDEO
(IN/OUT) VIDEO 1
VIDEO 3
VIDEO 2
AUDIO 1
R L
YCb/PbCr/Pr
DVD 1/HD 1 AUDIO 2
R
L
AUDIO 3
R L
Cr/Pr Y Cb/Pb HD VD
RGB 1
(IN/OUT)
RGB 3
DVI
OUTIN REMOTE
External Control
LOCATED AT
BOTTOM OF DISPLAY
POWER
EXT. SPEAKERS
(MONO) (MONO)
R/ G/ B/
(MONO)
(Digital RGB)
RGB 2/DVD 2/HD 2
www.necvisualsystems.com 50XM3/S Page 9 of 10

Control Codes
Function Code Data
POWER ON 9FH 80H 60H 4EH 00H CDH
OFF 9FH80H 60H 4FH00H CEH
INPUT SWITCH VIDEO1 (BNC) DFH 80H 60H 47H 01H 01H 08H
VIDEO2 (RCA) DFH 80H 60H 47H 01H 02H 09H
VIDEO3 (S-Video) DFH 80H 60H 47H 01H 03H 0AH
DVD1/HD1 (RCA/Component) DFH 80H 60H 47H 01H 05H 0CH
DVD2/HD2 (5BNC/Component) DFH 80H 60H 47H 01H 06H 0DH
RGB1 (15pin HD) DFH 80H 60H 47H 01H 07H 0EH
RGB2 (5BNC/RGB) DFH 80H 60H 47H 01H 08H 0FH
RGB3 (DVI) DFH 80H 60H 47H 01H 0CH 13H
AUDIO MUTE ON 9FH 80H 60H 3EH 00H BDH
OFF 9FH 80H 60H 3FH00H BEH
PICTURE MODE NORMAL DFH 80H 60H 0AH 01H 01H CBH
THEAT.1 DFH 80H 60H 0AH 01H 02H CCH
THEAT.2 DFH 80H 60H 0AH 01H 03H CDH
DEFAULT DFH 80H 60H 0AH 01H 04H CEH
SCREEN MODE: STADIUM DFH 80H 60H 51H 01H 02H 13H
ZOOM DFH 80H 60H 51H 01H 03H 14H
NORMAL DFH 80H 60H 51H 01H 04H 15H
FULL DFH 80H 60H 51H 01H 05H 16H
AUTO PICTURE ON DFH 80H 60H 7FH 03H 03H 09H 00H 4DH
OFF DFH 80H 60H 7FH 03H 03H 09H 01H 4EH
CINEMA MODE ON DFH 80H 60H C1H 01H 01H 82H
OFF DFH 80H 60H C1H 01H 02H 83H
NOTE: Contact your NEC rep for codes not listed.
NOTE: Use a cross/reverse/null modem cable.
Cable Connection
Communication Protocol:
Interface: RS-232C Parity: Odd
Communication: Asynchronous Stop Bit: 1 bit
Baud Rate: 9600 bps Communication Code: Hex
Data Length: 8 bits
PC Control Connector (D-Sub 9P)
12345
67 89
To GND of PC
To RxD of PC
To TxD of PC
To CTS of PC
To RTS of PC
NOTE: Jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
www.necvisualsystems.com 50XM3/S Page 10 of 10