7N8P5551
Printed in China
Copyright© 2005 by NEC Viewtechnology, Ltd.
Ver 1.01/05
PC CONTROL
COMPONENT IN
COMPUTER IN
VIDEO INAUDIO IN
AUDIO OUT
S-VIDEO IN
R
Cr/Pr
Cb/Pb
Y
L
AUDIO IN
AC IN
MONITOR OUT
COMPUTER IN
AUDIO OUT
L R
COMPONENT OUT
YCbCr
COMPONENT IN
RGB/VGA signal cable (supplied)
RGB/VGA-Signalkabel(Lieferumfang)
Câble de signal RGB/VGA (fourni)
Cavo dei segnali RGB/VGA(in dotazione)
Cable de señal RGB/VGA (suministrado)
RGB/VGA-signalkabel (medföljer)
Component video RCA
⳯
3 cable (not supplied)
Komponenten-Videokabel RCA
⳯
3 (nicht im Lieferumfang)
Câble de composant vidéo RCA
⳯
3 (non fourni)
Cavo del componente video RCA
⳯
3 (non in dotazione)
Cable de video componente RCA
⳯
3 (no suministrado)
Komponentenvideo-RCA
⳯
3-kabel (medföljer ej)
DVDplayer
PC
CONTROL
COMPONENTIN
COMPUTERIN
VIDEOIN
AUDIOIN
S-VIDEOIN
R
Cr/Pr
Cb/Pb
Y
L/mono
AUDIOIN
LAMP
STATUS
POWER
ON/STAND BY
AUTO
AD
MONITOROUT
Connect the supplied power cable.
Power cable (supplied)
Netzkabel (Lieferumfang)
Câble d’alimentation (fourni)
Cavo d’alimentazione (in dotazione)
Cable de alimentación (suministrado)
Nätkabel(medföljer)
CONTROL
S-VIDEOIN
R
Cb/Pb
Y
L/mono
STATUS
LAMP
POWER
Turn on the main power switch.
LAMP
STATUS
POWER
SOURCE
AUTO
ADJ.
ON/STAND BY
SELECT
MENU
UP
KEYSTONE PAGE
OFF
POWER
ON
PIC-MUTE
DOWN
LAMP
STATUS
POWER
SOURCE
AUTO
ADJ.
ON/STAND BY
SELECT
VOLUME
S-VIDEO
VIDEO
L-CLICK
MOUSE
R-CLICK
AUTO ADJ.
NOISE RED.
COMPUTER
COMPONENT
ASPECT HELP
FREEZEPICTURE
Turn on the projector.
To turn on the projector, press and hold the ON/STAND BY button on the projector cabinet or the
POWER ON button on the remote control for a minimum of 2 seconds.
DrückenundhaltenSiezum Einschalten des Projektors die ON/STANDBY-TasteamProjektorgehäuse
oder die POWER ON -Taste auf der Fernbedienung mindestens 2 Sekunden lang gedrückt.
Pour allumer le projecteur, appuyer sur la touche ON/STAND BY du coffret du projecteur ou sur la
touche POWER ON de la télécommande et la maintenir enfoncée pendant au moins 2 secondes.
Per accendere la corrente del proiettore, premete e mantenete premuto il tasto ON/STAND BY
sull´involucro del proiettore o il tasto POWER ON del telecomando, mantenendolo premuto per almeno
2 secondi.
Para conectar la alimentación del proyector, pulse el botón ON/STAND BY en la cubierta del proyector
o el botón POWER ON en el mando a distancia durante al menos 2 segundos.
Tryck påON/STAND BY -tangenten påprojektorhöljet eller POWER ON -tangenten påfjärrkontrollen
intryckt i minst 2 sekunder för att slåpåströmmen till projektorn.
Select a source.
Connect your video equipment or computer to the projector.
LT180_QUICK.p65 04.12.8, 3:09 PM1
