NEC Express5800/120Rg-2 User manual

Express5800
/
120 R g -2
Offers Application Service Providers
and Internet Service Providers
outstanding scalability and manageability
for their Internet andWeb application
hosting services, and allows wide-ranging
enterprises to consolidate their applications
and infrastructure services
NEC Express5800/120Rg-2 features up to two Intel®
Xeon™Processors 3.40GHz/3.20GHz/3GHz with 800MHz
system bus and 1MB 2nd cache. It supports Intel®Extended
Memory 64Technology (Intel®EM64T), the industry’s latest
enhancement that allows Intel’s IA-32 processors to run 64-
bit code and to access large memory amounts.
NEC Express5800/120Rg-2 delivers up to 12GB DDR333
SDRAM memory (6 DIMM sockets) with ECC and Chipkill
capabilities.
In addition, NEC Express5800/120Rg-2 supports Ultra 320
SCSI hard disk drives, enabling on-board RAID 0/1, without
a separate disk array controller, and optional RAID 5.
This prevents loss of important data and allows higher
system availability in the event of a disk failure, while
reducing the cost for the extra device.
For optimal I/O expandability, NEC Express5800/120Rg-2
offers a total of 6 PCI slots: 3x 64bit/100MHz PCI-X
(FullHeight) and 3x 64bit/66MHz PCI-X (LowProfile).With
new optional riser cards, the slot availability* can be changed
to 3x 64bit/133MHz PCI-X (FullHeight) and 3x 64bit/66MHz
PCI-X (LowProfile) or 3x 64bit/33MHz 5V-PCI (FullHeight)
and 3x 64bit/66MHz PCI-X (LowProfile), enabling a transfer
speed scalable up to 1066MB/s.
To ensure continuous system operation, optionally hot-swap
redundant power supply and fans are supported.
NEC ESMPRO makes your server management easy.With a
user-friendly graphical interface, a system administrator can
monitor and control system operation from a remote console,
and troubleshoot with advanced problem management
functions.
NEC EXPRESSBUILDER makes your system installation
simple.Just by inserting a single CD-ROM and following a
series of user-friendly customization menus, a system
administrator can set up and configure the system with ease.
Product Highlights
■
NEC Express5800 /
120Rg-2
* The PCI slot availability can be changed when the optional riser cards become available.

Express5800
/
120 R g- 2
NEC Express5800 /
120Rg-2
Hardware Specification
•Microsoft, Windows NT, and Windows are registered trademarks of Microsoft Corporation in the U.S.
•Intel, Intel Xeon, and the Intel Inside Logo are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
•Linux is a trademark of Linus Torvalds.
•Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
•All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders.
•Specifications are subject to change without notice.
Cat.No. E04BS9
NEC Express5800
For further information, please contact:
Intel®XeonTM Processor
3.40GHz/3.20GHz/3GHz
1GB(512MB DDR333 SDRAM DIMM x 2)
12GB (2GB x 6)
879B (146.5GB x 6)
Ultra 320 SCSI
1MB
800MHz
1-2
Intel E7520
Supported
Supported
3.5”x 1
X 24, ATAPI
10/100/1000BASE-T x 2
1[1] (3.5”bay)
6[6]
64bit/100MHz PCI-X x 3 *1
64bit/66MHz PCI-X x 3
Integrated ATI RADEON 7000 (8MB)
On-board SCSI RAID 0/1
SCSI RAID 5 (option)
Supported
Intel®
HyperThreading
Technology
Intel®
Extended Memory 64
Technology
CPU
2nd Cache
Front Side Bus
No. Of CPU
Chipset
FDD
CD-ROM
Network
Device bays [Free]
Disk Drive bays [Free]
Expansion slots
Graphics
Standard
Max
Max
I/O
RAID
Hot-Plug
Memory
Internal
HDD
Power supply
Cooling fan
External interface
Dimension
Weight
Support OS
Standard: 1, not redundant, 600W
Option: up to 2, redundant, hot-swap
Standard: not redundant
Option: Rredundant, hot-swap
Video x 1, Keyboard/ Mouse x 1 *2
USB2.0 x 4, LAN x 2, SCSI x 1
Serial x 2
483Wx817.6Dx87.4H mm
(including front bezel)
21kg (standard), up to 30kg
Windows®2000 Server / Advanced Server
Windows®Server 2003,
Standard Edition / Enterprise Edition
Red Hat Linux
*1 Operate at 66MHz if all the three slots are used.
*2 The key board and mouse can be connected together by using
a Y-cable provided with the main unit.