NEC LT280 - XGA LCD Projector Instruction Manual

ISSUED: 12-17-04 SHEET NO: 120-9511-1
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax [phone]
www.peerlessindustries.com
page 1 of 2
©2004PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
MODEL:SCP100
The Lightweight Adjustable Suspended Ceiling Plate allows a
projector to be mounted above a 2’ x 2’ or 2’ x 4’ false ceiling tile. It offers
unlimitedadjustability andprojector mountplacement anywherewithin a
standard ceiling grid. It can be used with or without an extension column
and offers two electrical knockouts. It is specifically designed for projectors
andoffers alow-profile, secure solution to complement sleek, lightweight
projectors.
Features:
• Includestie wirefora 3'drop, turn buckles,and fasteners formounting
• Unlimited projector placement above a 2' x 2' or 2' x 4' standard ceiling tile
• Escutcheonring includedfor a cleanfinish
•Pre-assembled, easy to install design reduces installation time
• Compact,lightweight,theftresistant design
Accessories:
• Fixed and Adjustable length Extension Columns, 1 1/2" NPT
("EXT"or"ADJ"models)
• Fixed length Extension Columns, 3/4" NPT (FLP Series)*
*Must be used in conjunction with an ACC 913, Pipe Reducer
(2mayberequired)
Dimensions:
Weight:
6.5 lb (3 kg)
Shipping weight:
7.7 lb (3.5 kg)
Maximum Load Capacity:
60 lb (27.2 kg)
ShippingCartondimensions:
L= 26.25in(667mm)
W= 13.5in (343mm)
H= 1.88 in (48 mm)
A R C H I T E C T S S P E C I F I CAT I O N S
The Lightweight Adjustable Suspended Ceiling Plate shall be a NEC model SCP 100 and shall be located where indicated on the plans. It shall
contain an adjustable collar mount plate with a 1 1/2-11.5 NPS center threaded fitting and holes for outlet boxes (Raco 445 or Appleton 383
recommended) and antenna leads. It shall feature a tie wire support system to transfer the load to four attachment points (in the true ceiling
above) with turnbuckles to fine tune the level of the ceiling tray. The finish shall be white fused epoxy. Assembly and installation shall be done
according to instructions provided by the manufacturer.
TECHNICAL DATA SHEET - Lightweight Adjustable Suspended
Ceiling Plate

TECHNICAL DATA SHEET MODEL:SCP100
page 2 of 2
ISSUED: 12-17-04 SHEET NO: 120-9511-1
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax [phone]
www.peerlessindustries.com
©2004PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
3.25 in
(83 mm)
3.69 in
(94 mm)
Electrical Hole
2.25 in
(57 mm)
1.2 in
(31 mm)
1 1/2-11.5 NPS
24.6 in
(625 mm)
8.2 in
(208 mm)