ROTATOR FEEDTUBE ASSEMBLIES & ACCESSORIES
FT-01
Assembled Part Nos.
12” (30cm) Stake w/
24” Tube (61cm) & Barb
#10745-024,
12” (30cm) Stake w/
36” Tube (72cm) & Barb
#10745-036,
17.5” (45cm) Stake w/
36” Tube (76cm) & Barb
#10744-036
FT-02/FT-03
For complete
assembly order
adapter, 2 clips
(for FT-02 only),
feedtube & stake
(see options below)
FT1
Assembled Part No.
Adapter,Tubing & Barb
#9308-030,
Orange Stake
#9261-002
FT2
Assembled Part No.
Adapter,Tubing & Barb
#9741-030,
Stake (see options
below)
FT4
Assembled Part No.
Adapter,Tubing & Barb
#9752-036,
Stake (see options
below)
FT5
Assembled Part No.
Adapter,Tubing & Barb
#9737-048,
Stake (see options
below)
TO ORDER:
Specify
FT
Number, Stake
Part Number,
Assembled or
Unassembled.
All assemblies
except FT-01 do not
include stakes,
order separately.
Any part may be
ordered in bulk by
specifying a part
number. Order
fittings in bulk &
tubing in coils and
then cut to desired
length and assemble.
ROTATOR®R5 R5 R10, 3/8”MNPT R5*, R10, R10/R10T, Acme R10/R10T, Acme
OPTIONS (not for 10FC Nozzles) Acme Base R2000/R2000WF R2000/R2000WF
LARGESTNOZZLE #55 #55 #60 2TN #60 2TN #14 2TN #15 2TN
Stay below this size to avoid 24 GPH 24 GPH .5 10 FC .5 10 FC 2.5 2000 FC 2.5 2000 FC
excessive pressure loss. See back.
OPERATING 9 - 29 GPH 9 - 29 GPH .28 - .65 GPM .28 - .65 GPM .7 - 2.6 GPM 1.0 - 3.1 GPM
RANGE 34 - 110 LPH 34 - 110 LPH 61 - 147 LPH 61 - 147 LPH 150 - 590 LPH 217 - 695 LPH
ADAPTER N/A Stake Adapter #10136 CollarAdapter #9262 Stake Adapter, Stake Adapter, Stake Adapter,
ConnectsTube
(for inverted mount use (Also fits over 1/2”PVC) Acme Thread #9677 Acme Thread #9677 Acme Thread #9677
to Stake
2 hanger clips #9987)
TUBING 4mm Flexible PVC 4mm Flexible PVC 5mm Flexible PVC 5mm Flexible PVC 10mm Flexible PVC 10mm Flexible PVC
24”(61cm) w/ Barb 24”(61cm) w/ Barb 30”(76cm) 30”(76cm) 36”(71cm) 48”(122cm)
#9960-924, #9960-924, #9284-030, #9284-030, #9099-036, #9099-048,
36”(91cm) w/ Barb 36”(91cm) w/ Barb 1,000’ (305m) coil 1,000’ (305m) coil 500’ (152m) coil 500’ (152m) coil
#9960-936, #9960-936, #9284 #9284 #9099 #9099
1,000’ (305m) coil 48”(122cm) w/ Barb
#10081-002 #9960-948,
1,000’ (305m) coil
#10081-002
BARB LTO, Barb x Barb LTO, Barb x Barb LTO, 5mm LTO, 5mm LTO, 10mm QC LTO, 10mm
Connects PVC
#10080 #10080 Compression x Barb Compression x Barb Compression x Barb Compression x Male QC
Tubing to PolyTube
#9305 #9305 #9774 #9740
QC Barb x 10mm Comp.
#9739
STAKE
Plastic
18” (45cm) Fiberglass
Plastic
18” (45cm) Fiberglass
24” (61cm) Steel 36” (76cm) Steel
12” (30cm) 6.3mm #10040-018, Orange Stake 6.3mm #10040-018, 8mm #9725-024, 8mm #9725-036,
#10847, 24” (61cm) Fiberglass #9261-002 24” (61cm) Fiberglass 24” (61cm) Fiberglass 36”(91cm) Fiberglass
17.5” (44cm) 6.3mm #10040-024, 6.3mm #10040-024, 8mm #10160 8mm #10970
#10848 24” (61cm) Steel 24” (61cm) Steel 36”(91cm) Fiberglass 48” (122cm) Steel
4.7mm #9982-124, 6.3mm #9726-024 8mm #10970 8mm #9725-048
48” (122cm) Fiberglass
4.7mm #9982-148
HAND PUNCH 4mm (Green) 4mm (Green) 5mm (Red) 5mm (Red) 7mm (Blue) 10mm (White)
Creates Hole
#10997 #10997 #9349 #9349 #9810 #9776
for Barb
Connection to Poly Tube
DRILL PUNCH TOOL N/A N/A 5mm 5mm 7mm 10mm
Creates Hole for Barb
#9835-003 #9835-003 #9835-002 #9835-001
Connection
to Poly Tube
*The FT2 Feedtube Assembly can be used with the R5 Rotator in conjunction with #10616 Male Acme x R5 Adapter.
