Nenos CAT User manual
MANUAL
PLEASE READ!
2-YEAR LIMITED WARRANTY WITH
YOUR PURCHASE
Sized to fit ages 3
Uni1
Nenos kids headphones come with a 2-year limited
warranty. If you have any questions or issues with the
headphones, please email us at
[email protected]. We will reply within 24 hours.
2-YEAR LIMITED WARRANTY
Bluetooth Version V 5.0
Support Profile: Support a2dp\avdtp\avrcp\hfp\spp\smp
\att\gap\gatt\rfcomm\sdp\I2cap profile
Working Distance Range: 20m
Battery Specifications: 300mAh, Built-in rechargeable
lithium-ion battery
Charging Voltage: 5V/1A
Charging Time: about 2.5 hours
Talking/Music time: LED lights turn on for about 5
hours/turn off for about 8 hours
Working Frequency: 2.402-2.480GHz
Impedance: 32 Ω
Sensitivity: 93+-3db
PRODUCT SPECIFICATIONS
•
•
•
•
•
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS
CONTENTS
tV "
ON/OFF, Play/Pause, Answer Calls/Hang Up Calls
Short press to reduce volume/ Long press for previous song
Short press to increase volume/Long press to go to next song
Short press to switch play mode/Long press to switch to LED lamp
BLUETOOTH MODE
1. STARTUP:
Long press
for at least 3 seconds, the headset will start up and enter
into Bluetooth mode automatically, voice prompts “POWER ON.”
2.PAIRING OPERATION:
a. First-Time Pairing: Start up the Bluetooth headset, voice prompt “Power On”
will be heard, and then enter into Bluetooth mode automatically, voice prompt
“Bluetooth Mode” LED indicator light flashes with blue and green colors. Please
open the smart device’s Bluetooth searching function and select device “Nenos
Cat Ear”, no password is required (If some devices require password, please enter
“0000”.) After the pairing is successful, voice prompt “Connected” will be heard,
LED indicator light turn to blue.
b. Re-pairing: Turn off the attached smart device’s Bluetooth function, voice
prompt “Disconnected” will be heard, LED indicator light will flash in alternating
blue and green colors. Open another smart device’s Bluetooth searching function
and select the device “Nenos Cat Ear,” no password is required. (If some devices
require password, please enter “0000”.) After pairing is successful, a tone will be heard, LED
indicator light will turn blue.
Follow-up Pairing: Automatically search and pair the last connected device
in 3 seconds after “Power On.”
d. Button Operation:
To Answer Calls: Short press •
• when you receive incoming call
To End Phone Calls: Short press·
when ending a call
To Reject Phone Calls: Long press
for 2 seconds when
receiving a call
Redialing the last number: Double-click
5) Playing Music: Short press·
to play/pause the music when it’s on.
Volume Control: Short press •
to reduce volume (minimum volume
tone "dudu"), short press
· to increase volume (maximum volume tone
"dudu")
Previous/Next Songs: Long press •
" for previous song; long press
"
" for next song
3. Shutdown:
Long press ·
" for at least 3 seconds when the headset is on, voice prompts
"Power Off', LED indicator light will turn off.
When the headset is on and the Aux-in cable is inserted, the Bluetooth
function will turn off and switch to Aux-in playing
1.Low battery - You will hear voice prompt "Please Charging"
2. When the headset has low battery, please use the included charging cable
to charge the headset and make sure the charging voltage is 5V/1A
3.Power saving mode: If there is no successful pairing for 5 minutes, the
headset will automatically shutdown to save power .
CHARGING MODE
AUX-IN MODE
BLUETOOTH MODE
LED INDICATOR LIGHT STATUS
Charge Status LED indicator light stays red. When fully charged,
blue LED indicator light turns on
Pairing Status LED indicator light rapidly flashes with alternating
blue and green colors
Connected Status LED indicator light stays blue
Bluetooth Mode, LED indicator light flashes blue
Using Status
Aux-in Mode, the headset automatically turns off
LED light turns off
•
If no there is no successful pairing connection after the Bluetooth
headset enters the pairing mode, please tum off the headset to save
power.
•
Do not perform other operations while establishing bluetooth connection to
prevent program error.
•
Please select the proper save volume while using the headset to prevent
damage to your ears and hearing loss.
•
Please keep the bluetooth headset in an appropriate environment to avoid
damage to the headset.
•
Please charge the headset after a long time non-use.
WARNINGS
1.Contains small parts which may be a chocking hazard. Not
suitable for children under age 3.
2.
Use extreme caution when operating a vehicle or similar activity
that requires your full attention while using your headset/
headphones. Some jurisdictions impose specific limitations, such
as single earpiece configuration, on the use of such products while
driving.
3.
Long-term exposure to loud music may cause hearing damage. It
is best to avoid high volume levels when using headphones,
especially for extended periods.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause hannful interference, and
(2) This device must accept any interference received, including
interterence that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the
party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide rea sonable protection against
hannfu1 interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and,
if not
installed and
used
in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that inter1erence will not occur in a particular installation. If
this equipment does cause harmful inter1erence to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the inter1erence by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect
the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
RF warning statement:
The
device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
oondition without restriction.
Table of contents
