Nero 300 User manual

Attention:
1. Please read the owner’s manual before using the product.
2. Use distilled or boiled water only. Do not fill in with any other
liquid except water.
3. The iron must not be left unattended while it is connected to the
supply mains.
4. The plug must be removed from the socket-outlet before the
water reservoir is filled with water.
5. When placing the iron on its heel, ensure that the surface on
which the iron is placed is stable.
6. The iron must be used and rested on a stable surface.
7. The iron is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking. This appliance is not
intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
8. Children should be supervised to ensure that they do not play
with the appliance.
Cautions:
1. Make sure that the applied voltage is same as the rating voltage,
and the socket has effective earth connection.
2. If the supply cord is damaged,
it must be replaced by the
manufacturer or a qualified person in order to avoid a hazard.
3. This iron is for household use only.
4. Do not immerse the iron into any liquid for cleaning.
5. Do not touch any hot metal parts, hot water, or steam to avoid
scalding.
Main technical parameters:
Type Rated voltage Rated
frequency Rated power
AJ-2027B 220-240V 50/60Hz 1600-2000W
NON-STICK, STEAM/DRY IRON
MODEL 300
Please read these instructions before use and view
the illustration
components before using the appliance.
Backed by Nero’s 12 month replacement guarantee
Imported By Weatherdon www.weatherdon.com.au
Made in China

Components:
This product has many features such as a temperature regulating
dial, spraying, dry ironing, variable steam, and steam burst.
It also
features an easy to grip shape, with high heat efficiency, resulting in
quick ironing of clothes.
A
B
C
D
E
F
G
HIJ
L
M
K
A: Non-stick soleplate
H: Spray button
B: Skirting base I: Bottom handle area
C: Water tank J: Temperature control dial
D: Spraying nozzle K: Pilot light
E: Top handle
L: Power cord guard
F: Fill cover M: Rear cover
G: Steam/spray/on-off toggle
Filling water:
1. Before filling the water tank remove the plug from the
wall socket.
2. Set the steam control to the minimum position.
3. Flip down the cover of water filling lid, then fill with water.
Spraying:
Press
the spraying button, steam will be sprayed out from the
spraying nozzle. Ensure that you keep enough water in the water tank
for smooth ongoing operation.
Steam ironing:
1.
To use steam ironing, turn the steam on/off switch to the
minimum position and set the temperature control on the dial to
the max position.
2. After the heating indicator light goes out, turn the steam on/off
switch to maximum position, steam can be sprayed and ironing
can start.
Dry ironing:
Turn the steam on/off switch to the minimum posi
tion, set the
temperature control to the suitable position, you can start dry ironing.
Storage:
After using, pull out the plug, pour out the remaining water, turn the
temperature control to minimum, let the iron cool down and place the
iron in a safe and dry place vertically.