Nero 450 User manual

Storage:
After using, pull out the plug, pour out the remaining water, turn the
steam control to minimum, turn the temperature control to minimum, let
the iron cool down and place the iron in a safe and dry place vertically.
Attention:
1. Please read the owner’s manual before using the product.
2. Use distilled or boiled water only. Do not fill in with any other
liquid except water.
3. The iron must not be left unattended while it is connected to the
supply mains.
4. The plug must be removed from the socket-outlet before the
water reservoir is filled with water.
5. When placing the iron on its heel, ensure that the surface on
which the iron is placed is stable.
6. The iron must be used and rested on a stable surface.
7. The iron is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking. This appliance is not
intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
8. Children should be supervised to ensure that they do not play
with the appliance.
Cautions:
1. Make sure that the applied voltage is same as the rating voltage,
and the socket has effective earth connection.
2. If the supply cord is damaged,
it must be replaced by the
manufacturer or a qualified person in order to avoid a hazard.
3. This iron is for household only.
4. Do not immerse the iron into any liquid for cleaning.
5. Do not touch any hot metal parts, hot water, or steam to avoid
scalding.
Main technical parameters:
Type Rated voltage Rated
frequency Rated power
AJ-2048-22 220-240V 50/60Hz 2000-2400W
NON-STICK, AUTO-OFF, STEAM/DRY IRON
MODEL 450
Please read these instructions before use and view
the illustration
components before using the appliance.
Backed by Nero’s 12 month replacement guarantee
Imported By Weatherdon www.weatherdon.com.au
Made in China

Components:
This product has many features such as a temperature regulating
dial, spraying, dry ironing, variable steam, and steam burst.
It also
features an easy to grip shape, with high heat efficiency, resulting in
quick ironing of clothes.
A: Non-stick soleplate
R: Top handle
B: Spray nozzle
I: Rear cover
C: Handle J: Pilot light temperature dial
D: Fill cover K: Clean button
E: Steam on/off switch
L: Water tank
F: Spray & burst steam button
M: Skirt adornment
G: Heating indicator light N: Skirting base
H: Cord guard
Filling water:
1. Before filling water, please pull out the plug first.
2. Set the steam control to the minimum position.
3. Pull open the cover of water filling mouth, then fill water.
Spraying:
Press the spraying button, steam will spray out from the spraying
nozzle. Enough water should be kept in the water tank for steaming.
Steam ironing:
1. To use steam ironing, turn the steam on/off switch to the
minimum position and set the temperature control on the dial to
the max position.
2. After the heating indicator light goes out, turn the steam on/off
switch to maximum position, steam can be sprayed and ironing
can start.
Bursting steam:
Set the temperature control dial to the maximum
position, then
press down the bursting stea
m button, the base plate will spray out
bursting steam.
Dry ironing:
Turn the steam on/off switch to the minimum position,
set the
temperature control to the suitable position, you can start dry ironing.
Self cleaning:
First fill the tank with water, then turn the iron on and set the
temperature control to the maximum position
, after about 3 minutes
press the self-clean button for about 1 minute, strong steam and hot
water will be sprayed to clean the steam chamber. Use this function
once every two weeks if the iron has been used regularly.
Automatic shut off:
If the iron is switched on and not moved for a period of 8 minutes
while standing on its heel or 30 seconds while resting on the soleplate,
an internal safety feature will switch the iron off and the auto-shutoff
indicator will blink. Move the iron to turn on heating again.