Nesco NC-5790 User manual
Instruction Manual
คู่มือการใช้งาน
MULTI BLENDER
MODEL : NC-5790
220 W 220-240 V 50 Hz
1
220 W 220-240 V 50 Hz
3
5
6
7
English
Multi Blender
Description
Dear Customer Thank you for choosing a Nesco appliance.The experience,
design, feature and technology of this appliance, as well as the strict quality
controls used during manufacture, will provide full satisfaction for many years.
A. High cup
B. Cross blade
C. Cup base
D. Main engine
E. On/off button
F. Red indicator
G. Blue indicator
H. Main engine base
I. Low cup
J. Flat blade
K. Cup base
L. Pusher
M. Lid
N. Cover of blender cup
O. Filter
P. Seal cover of cup base
Q. Bottom cover
R. Big hole bottom cover
S. Big and small hole
T. Blender Cup
220 W 220-240 V 50 Hz
8
Tip&safety precautions
Caution
1. This machine use AC voltage of 220-240V.
2. It is for bidden for the kids to operate this machine alone.
3. Operator must obey a rated intermittent time, it is forbidden to make it idle run
or overload
4. Changing the power cord shall be operated by the professional maintenance
personnel.
5. The blade base should be rmly locked with the cup,or there is a risk of water
leakage and cup falling.
6. The blade is very sharp, pay attention not to hurt your hand when cleaning
and disassembling the machine.
7. Continuous working time for each operation can not exceed 60 seconds. It
can only be used after the juice extractor is completely cooled.
8. The motor of this machine has a over-temperature protection device, the
machine will be paused as a result of overheating during operating,at this
moment,you should cut off the power supply,restart it till it is completely cooled.
9. The processing material in the blending cup should not exceed the line of
1000ml while blending.
10. During operating, it is forbidden to put hands and sharp goods into the
feeding port ;
it is forbidden to use other tools instead of the feeding bar; it is forbidden to keep
eyes close to the feeding port to avoid accidental injuries
11. Do not directly use water to wash the main engine,and it will cause electrical
failure or accident of motor and switch.
9
Operating Instruction
Steps of using
1. Blending :
1) Put the machine on a stable table.
2) Screw on the cross knife base at the bottom of the blender cup or smart cup.
3) Firstly adding an appropriate amount of puried water in the blender cup or
smart cup, then put the vegetables and fruits which have been cut into small
pieces in the blender cup or smart cup, pay attention that the whole mixed
volume can not exceed the “MAX” scale-line position of the cup.
4) Put the cover and lid onto the blending cup, then tighten it clockwise. When
using the high cup, just add food into the cup and twist the cross blade onto
the bottom.
5) Plug in the machine into 220-240 voltage and make sure the indication light
is red.
6) Put the blending cup on the main body and be sure the upper concave parts
x well to the convex parts on the bottom of the cup, then tighten it clockwise.
7) Press the switch and be sure the indication light is blue, at that time the
machine runs normally.
2. Soy-bean milk making :
1) Dip the soybean into the water for 8 hours.
2) Insert the lter down the center of the cup, making sure to line the three
notches up with the three ribs inside of the blending cup.
3) Twist the cross blade onto the bottom of blending cup.
4) Add some water in the blending cup and waterlogged beans in the lid.
Measure the beans by lid, and never add beans more than one and half cups.
After it , x the lid on the cover of the cup.
5) Plug in and press down the switch. When the machine works regularly, it can
nish the soybean milk making in 1 minute.
6) Pour out the soybean milk and the residue left in the lter naturally.
7) Boil the pre-processed soybean milk, then it can be drink directly.
3. Grinding
1) Put the food in the low cup, making sure it does not exceed 100g.
2) Twist the at blade on the bottom of low cup and x it on the main body.
3) Plug in the machine. Generally, it can nish grinding in 30 seconds.
4) Unplug the machine once it nish grinding, then twist off the blade and pour
out the food.
Clean and Maintain
1. In case of electric shock, you must be sure the machine is power off when
cleaning the body,
2. Clean the main body by wet close instead of water.
3. It can be used again once you clean up the parts and assemble them well.
4. The machine should be used often, otherwise place it in the dry and ventilated
environment.
Cleaning and care
Warranty is expired When (void of warranty)
Warranty motor only
- Damage or defective from delivery.
- Damage or defective from manufacturer, dealer & service.
- 1 year warranty for house hold use only.
- Use according to this instruction carefully
Warranty is expired when (void of warranty)
- Damage or defect from misunderstand how to use or service from non
authorized people.
- Electrical shock or any electrical problem.
- Lost or damage some part by accident or natural damage.
- Some parts are shelf life, need replacement.
- Warranty only in service area.
- This instruction may be changed with our prior notice.
- Company reserved the right to change all details before notice.
ศูนย์บริการ
www.nescoproduct.com
Table of contents
Languages:
Other Nesco Blender manuals
