nest ADIRONDACK CHAIR User manual

ADIRONDACK CHAIR
INSTRUCTIONS
• CHAIR BACK
• CHAIR SEAT
• LEFT CHAIR ARM
• RIGHT CHAIR ARM
• SPREADER BAR
• RUBBER MALLET
• PHILLIPS HEAD SCREWDRIVER
• DRILL
(8) BARREL NUTS
(8) 1” BARREL BOLTS
(2) 3” SCREWS
(2) 2” SCREWS
(1) ALLEN WRENCH
(1) SQUARE-HEAD BIT
HARDWARE PACK
CHAIR PARTS
SUGGESTED TOOLS
STEP 1. Use (4) 1” barrel bolts to attach chair back to chair
seat. Keep all barrel bolts loose until Step 3.
ASSEMBLY
CHAIR
BACK
CHAIR
SEAT
BARRELBARREL
NUTNUT
1”1”
BARRELBARREL
BOLTBOLT

Congratulations on purchasing this Adirondack Chair. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-758-0641.
RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking, peeling,
chipping, insect infestation or other damage should ever occur, The Hammock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any
returned product, along with a Return Authorization Number from Hammock Source customer service; call toll-free at 252-758-0641.
CONTRACTOR WARRANTY - CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above.
ASSEMBLY
STEP 3. Align arm holes with pilot hole in back and use (2) 3”
screws to attach the right & left chair arm to chair back.
Tighten all bolts.
STEP 2. Use (4) 1” barrel bolts, (4) barrel nuts, and (2) 2” screws to
attach right & left chair arm to chair seat and spreader bar. Keep all
barrel bolts loose until Step 3.
RIGHT
CHAIR
ARM
LEFT
CHAIR
ARM
1” BARREL
BOLT
SPREADER BAR
BARRELBARREL
NUTNUT
2” SCREW
3” SCREW
#6097