NetComm Wireless NF18ACV Dimensions

What if I cannot access NF18ACV’s web interface?
NF18ACV FAQs
NF18ACV FAQs
1 of 6
© NetComm Wireless 2017
How to Access the NF18ACV Web Interface
Windows Operating System
1Use Ethernet (yellow) cable to connect PC and modem.
2Check LED status of Ethernet port where LAN cable is connected. If LED is OFF go directly to 6.
3Disable and Enable Ethernet Connection in Windows.
aPress Windows + R key in your keyboard.
bIn Run command, type ncpa.cpl and press enter. It will open Network connections window.
cRight click and disable “Ethernet” or “Local Area Connection” connection.

2 of 6
What if I cannot access NF18ACV’s web interface?
© NetComm Wireless 2017
dRight click and Enable it again.
eRight click either Ethernet or Local Area Connection connection and:
iClick Properties
ii Click Internet Protocol Version 4 (TCP/IPv4)
iii Click Properties
iv Click Obtain an IP address automatically
vClick OK
vi Click OK again.
4Press Windows + R key and type cmd to open command prompt.

NF18ACV FAQs
3 of 6
© NetComm Wireless 2017
5In command prompt, run ipconfig to check whether client is getting IP address or not.
Run ping 192.168.20.1 command to check whether client can ping modem or not.
You should be able to get IPv4 address, Default gateway and reply from ping as in the snapshot below.
6If you still cannot access modem, change Ethernet port in the modem, use different Ethernet cable and/or
computer/laptop.
7Check rebooting the modem.
8If you still cannot access modem, connect the modem with wireless and check whether you can ping modem or not.

4 of 6
What if I cannot access NF18ACV’s web interface?
© NetComm Wireless 2017
MAC Operating System
1Use Ethernet (yellow) cable to connect PC and modem.
2Check LED status of Ethernet port where LAN cable is connected.
3Click the Wi-Fi (airport) icon on the top right corner of the screen and link “Open Network Preferences…”
4Check your Ethernet connection.
You should be using DHCP and not static IP address.
You should be able to get router IP address as 192.168.20.1.
5If you are using static IP address, click Advanced, select Configure IPv4 as Using DHCP and click OK.

NF18ACV FAQs
5 of 6
© NetComm Wireless 2017
6Navigate to Applications > Utilities and open Terminal.
7Type ping 192.168.20.1 and press Enter.
There should be ping reply as shown in the below snapshot.

6 of 6
What if I cannot access NF18ACV’s web interface?
© NetComm Wireless 2017
Accessing Modem’s web interface
1Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type following address into the address
bar and press enter.
http://192.168.20.1
2Type admin in both the User Name and Password and click OK.