NetComm Wireless NF18ACV User manual

Wireless Security Setup Guide
NF18ACV FAQs
NF18ACV FAQs
1 of 7
© NetComm Wireless 2017
Wireless Security Overview
To guard your home network against attack and prevent unauthorised access, it is very important that you follow this guide
to secure your network.
Changing the wireless password
1Connect a computer and theNF18ACV using an Ethernet cable. (A yellow Ethernet cable was provided with your
NF18ACV).
2Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address bar and
press Enter.
http://192.168.20.1
3Enter the following credentials in the User Name and Password fields:
User Name: admin
Password: admin
Login screen
Note –If no authentication prompt is displayed or you see a request time out message, refer to “What if I cannot access Web User
Interface guide” from FAQs section.

2 of 7
Wireless Security Setup Guide
© NetComm Wireless 2017
Wi-Fi 2.4GHz/WiFi 5GHz
The NF18ACV allows you to maintain separate wireless settings for both 2.4GHz and 5GHz wireless services.
Select the service you want to use (or both) and separately configure them:
2.4 GHz Wireless configuration pages
5 GHz Wireless configuration pages
We recommend that you access the web interface over a wired connection (using Ethernet cable) to change the WiFi
security key/password.
We also recommend that you change the WiFi network name/SSID (e.g. NetComm 8386) before changing the WiFi
security key (WiFi password).

NF18ACV FAQs
3 of 7
© NetComm Wireless 2017
Wireless –Basic (Change SSID)
1Navigate to Wireless > 2.4 GHz/5 GHz > Basic.
2Confirm that Enable Wireless and Enable Wireless Multicast Forwarding (WMF) are selected.
3The old WiFi network name/SSID on this example is “NetComm 5354”.
Delete the old WiFi network name/SSID and enter a new SSID (For example: NetComm 8386).
4Press the “Apply/Save” button.

4 of 7
Wireless Security Setup Guide
© NetComm Wireless 2017
Wireless –Security
Selecting a wireless security type:
We highly recommend that you do not change the network authentication type. Use the default “WPA2-PSK”
authentication because it is the most secure one. Changing it to another type such as WEP will compromise the
security of the NF18ACV.
Selecting a wireless security key:
We do not recommend changing the wireless security key from the default setting. It is randomly generated,
reasonably secure and unique to each unit. Your client devices will still have same password even if the NF18ACV
is reset to factory default settings. If you want to change it to a more secure password, add numbers and special
characters along with upper-case and lower-case characters. Generally speaking, the longer the password, the more
secure it is.
To change the WiFi security key, navigate to Wireless > 2.4GHz/5GHz > Security.
Delete all the dots (encrypted password) in the WPA/WAPI passphrase text entry field. Enter a new password and
click Apply/Save. After changing the password, click the Click here to display link next to WPA/WAPI passphrase to
check the new WiFi password. A pop up window displays your new WiFi password.
Click the Apply/Save button.

NF18ACV FAQs
5 of 7
© NetComm Wireless 2017
Connecting to your Wireless Network
Use your client device to scan for the network name, select the new WiFi network name/SSID (e.g. NetComm 8386)
and enter the new WiFi password to join the network.
Windows 10
The following is an example of connecting to the WiFi network using Windows 10.
1Click the wireless symbol in the bottom right corner of the device. A list of detected networks within range of your
computer is displayed. Select your WiFi network name (In this example, it is “NetComm 8386”) and click Connect.
2Enter the WiFi security key/password and click Next.
3Your computer connects to the WiFi network.
If you are facing difficulty to connect the Wi-Fi network name, refer to “Wireless Troubleshooting Guide” from
FAQs section.

6 of 7
Wireless Security Setup Guide
© NetComm Wireless 2017
Apple iPhone
The following is an example of connecting to the WiFi network using an Apple iPhone. On your iPhone, navigate to
settings and tap “Wi-Fi”.
When Wi-Fi is turned on, your phone scans for available nearby networks. Tap your WiFi network name/SSID [1]
(in this example, it is “NetComm 8386”), enter the WiFi password [2] and press Join [2].
If you are facing difficulty to connect the Wi-Fi network name, refer to “Wireless Troubleshooting Guide” from
FAQs section.
Android
The following is an example of connecting to the Wi-Fi network using an Android phone. On your Android Phone,
navigate to Settings > Connections and tap Wi-Fi.
When Wi-Fi is turned On [1], your phone scans for available nearby networks.
Tap your WiFi network name/SSID [2] (in this example, it is “NetComm 8386”), enter the WiFi password [3], select
Auto reconnect [3]and then select Connect [4].
The word Connected will appear under your WiFi network name/SSID [4] when the connection is successful.
If you are facing difficulty to connect the Wi-Fi network name, refer to “Wireless Troubleshooting Guide” from FAQs
section.

NF18ACV FAQs
7 of 7
© NetComm Wireless 2017
MacOS
1Click on the Airport/Wi-Fi icon at the top right corner of the screen as shown below. Click Turn Wi-Fi On.
Note –If you cannot see an Airport icon, your wireless adapter may not be installed or inserted correctly.
Please refer to your Mac user guide before continuing with the steps in this guide.
2A list of Wi-Fi networks including your WiFi network name/SSID is displayed (in this example, it is “NetComm 8386”).
Click your WiFi network name/SSID to connect to this network.
3Enter your WiFi security key/password and click Join to connect to the WiFi network.
If you enter an incorrect WiFi security key, a message will appear, and you will be prompted to enter the correct key
again.
4The Airport icon will now have black lines to indicate signal strength. To see if the computer is connected, click on the
Airport icon again. Your WiFi network has a tick next to its name.
The wireless network configuration is complete and you can now use the Internet. You can disconnect the Ethernet
cable, if you wish.