NetComm Dynalink 3G8WV User manual

Increase Wireless Reception
(3G8WV)

Increasing your wireless reception
If you are experiencing wireless reception drop outs or disconnections, another wireless
network or device ay be broadcasting on the sa e wireless channel as your own network.
You can usually resolve this by changing the wireless channel in use on your network.
This guide will take you through the steps required to change the wireless channel in use.
1. Navigate to http://192.168.20.1 in a web browser using “admin” (no quotes) as both
userna e and password.
2. Select the “Switch to advanced view” option.

3. Change the Frequency(channel) fro the current channel in use. Set the channel to
the opposite end of the scale to the current channel in use. For instance if the current
channel used is 11 try channel 1. For opti al perfor ance and to li it the chance of
wireless interference we reco end you select either channel 1, 6 or 11. ( This is
because there are 14 channels designated in the 2.4GHz range spaced 5 MHz apart
(with the exception of a 12MHz spacing before Channel 14). As the 802.11protocol
requires 25MHz of channel separation, adjacent channels overlap and will interfere
with each other. Consequently, using only channels 1, 6, 11, (and 14 where possible)
is reco ended to avoid interference.
4. Press the Apply button.
If you are still experiencing wireless reception issues, there ay be infrastructure (walls,
floors, wiring, etc) i peding your wireless signal. Please try oving the wireless device to a
position close to your ode / router and try connecting again.