NETGEAR WNA3100 - Wireless-N 300 USB Adapter User manual

Installation Guide
N300 Wireless USB Adapter WNA3100
Package Contents
Resource CD
N300 Wireless
Adapter
USB cable and
adapter cradle
Installation
1. Insert the resource CD into your computer CD drive to install the NETGEAR
genie software. If the CD main screen does not display, browse the files on the
CD and double-click Autorun.exe.
2. Click Setup.
The Software Update Check screen displays.
3. If you are connected to the Internet, click Check for Updates. If you are not
connected, click Install from CD.
4. Click I agree to accept the license agreement, and then click Next.
A message displays asking you to
wait while software is installed
(installation might take a few minutes).
Then you are prompted to insert your
adapter.
5. Either insert the adapter into a USB
port on your computer or use the
USB cable and adapter cradle
provided to connect the adapter.
The USB cable and adapter cradle
can extend the range of your adapter
and improve wireless reception. Insert
the adapter in the cradle and attach
the USB cable to the computer.
6. Click Next.
7. NETGEAR genie displays a list of wireless networks in your area.
Join a Wireless Network
You can join a wireless network from this NETGEAR genie screen, or you can use
Wi-Fi Protected Setup (WPS) if your wireless network supports it.
• NETGEAR genie: Click your wireless network to select it from the list and click
Connect.If the network is secure, enter its password or network key.
• WPS: Press and hold the WPS button on the side of the adapter for 2 seconds.
Within 2 minutes, press the WPS button on your wireless router or gateway.
The adapter joins the network, which can take a few minutes. Your settings are
saved in a profile.

September 2012
This symbol appears in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If you dispose of this product in the
European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the
WEEE Directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are trademarks or registered trademarks of their
respective holders. ©NETGEAR, Inc. All rights reserved.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For indoor use only in all EU countries and Switzerland.
Check Connection Status
When you install your adapter, the NETGEAR genie icon displays in the Windows
system tray and on the desktop.
You can double-click this icon to open NETGEAR genie to make changes or
connect to a different wireless network. The color of the icon indicates the strength
of your wireless connection:
Green: 3–5 bars (strong connection)
Yellow: 1–2 bars (weak connection)
Red: 0 (zero) bars (no connection)
If you remove your adapter, NETGEAR genie is not available, and the icon does not
display. If you insert the adapter again, the icon returns.
Technical Support
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit http://support.netgear.com.
You can get the user manual online at http://downloadcenter.netgear.com or
through a link in the product’s user interface.