NETGEAR ProSafe GS108v3 User manual

ProSafe 8-Port Gigabit Ethernet Switch GS108v3
Step 2. Connect power Step 3. Check status
Optional
modem
Step 1. Connect equipment
GS108v3
Optional router
Computer Server
Internet
On
Off
Power LED
Activity (blinking)
No link (off)
1000 Mbps link
(both LEDs)
(right LED)
10 Mbps link
Port LEDs
(left LED)
100 Mbps link
Installation Guide
GS108v3_IG_24sept2012.fm Page 1 Monday, September 24, 2012 10:16 AM

September 2012
This symbol appears in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the
European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the
WEEE directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
For indoor use only in all EU countries and Switzerland.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Specifications
Specification Description
Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T
Network cable Category 5e (Cat 5e) or better Ethernet cable
Ports 8
Power adapter 12V @ 1.0A DC input
Power consumption 5W max
Weight 0.522 Kg (1.15 lbs)
Dimensions
(W x D x H)
158 mm x 105mm x 27 mm
6.2 in. x 4.1 in. x 1.1 in.
Operating
temperature
0–50° C (32–122° F)
Operating humidity 10%–90% relative humidity, noncondensing
Electromagnetic
compliance
CE Class B, FCC Class B, VCCI Class B, C-Tick Class B
Safety agency
approvals
CE mark
Technical Support
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit http://support.netgear.com.
GS108v3_IG_24sept2012.fm Page 2 Monday, September 24, 2012 10:16 AM