NETGEAR RangeMax WPN311 User manual

Versionv1.0
February2005
NETGEAR, Inc.
4500 G reatAmerica P arkway
Santa Clara, CA 95054 U SA
User Manual for the
NETGEAR RangeMax™
Wireless PCI Adapter
WPN311

ii
Technical Support
Please refer to the support information card that shipped with your product. By registering your
product at http://www.netgear.com/register, we can provide you with faster expert technical
support and timely notices of product and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support
information card.
E-mail: [e-mail]
Web site: http://www.netgear.com
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
© 2005 NETGEAR, Inc. NETGEAR, the NETGEAR logo, The Gear Guy and Everybody's Connecting are
trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or
other countries. Other brand and product names are trademarks or registered trademarks of their respective
holders. Information is subject to change without notice. All rights reserved.
February 2005
Certificate of the Manufacturer/Importer
It is hereby certified that the Model WPN311Wireless PCI Adapter has been suppressed in accordance with the
conditions set out in the BMPT- AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example,
test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the
notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and
has been granted the right to test the series for compliance with the regulations.
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any
product changes or modifications will invalidate all applicable regulatory certifications and approvals
FCC Guidelines for Human Exposure
In order to comply with RF exposure limits established in the ANSI C95.1 standards, the user is advised to maintain a
distance of at least 1 inch (2.5 cm) from the antenna of this device while it is in use.

iii
FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required
to correct the interference at his own expense.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Export Restrictions
This product or software contains encryption code which may not be exported or transferred from the US or Canada
without an approved US Department of Commerce export license.
Canadian Department of Communications Radio Interference 
Regulations
This digital apparatus (Model WPN311 Wireless PCI Adapter) does not exceed the Class B limits for radio-noise
emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Canada ID: 4054A-WG311TV3
NETGEAR RangeMax™ Wireless PCI Adapter WPN311
FOR HOME OR OFFICE USE
Tested to C omply
with FC C Standards
FCC ID : PY3WG311TV3

iv
Product and Publication Details
Model Number: WPN311
Publication Date: February2005
Product Family: wireless access point
Product Name: NETGEAR RangeMax™ WirelessPCIAdapterWPN311
Home or Business Product: Home
Language: English
Publication Part Number: 202-10074-01

Contents v
Contents
Chapter 1 
About This Manual
Audience, Scope, Conventions ......................................................................................1-1
H owto Printthis M anual .................................................................................................1-2
Chapter 2 
Introduction
Aboutthe N ETGEAR RangeM ax™ Wireless PCI AdapterW PN311 .............................2-1
Key Features and Related NETGEAR Products ............................................................2-1
What’s in the Box? ..........................................................................................................2-2
A Road M ap for‘H ow to GetThere From H ere’ .............................................................2-3
Chapter 3 
Basic Setup
WhatYou Will N eed Before You Begin ...........................................................................3-1
Verify System Requirements ....................................................................................3-1
Observe Location and Range Guidelines ................................................................3-2
Two Basic Operating M odes ...........................................................................................3-2
WPN311 D efaultWireless Configuration Settings ..........................................................3-2
Basic Installation Instructions .........................................................................................3-3
ForW indows XP U sers Installing a WP N311 ...........................................................3-4
For W indows 2000 & 98SE /M e U sers Installing a W P N 311 ....................................3-8
WPN 311 Wireless Connection Indicators .....................................................................3-11
Interpreting System Tray Icon Colors .....................................................................3-12
Basic Troubleshooting Tips ...........................................................................................3-12
AboutPage ...................................................................................................................3-1 3
Chapter 4 
Configuration
U nderstanding the Configuration Options ......................................................................4-1
U sing Configuration Profiles ...........................................................................................4-1
Networks Page ...............................................................................................................4-2
Connecting to an Access Pointin Infrastructure M ode ...................................................4-3
Howto Configure an Infrastructure M ode Profile .....................................................4-3

vi Contents
Connecting to AnotherPC in Ad-H oc M ode ...................................................................4-5
HowtoConfigure an Ad-HocM ode Profile ..............................................................4-5
Enabling W ireless Security Features ..............................................................................4-8
Identifying the W ireless Security Settings ................................................................4-9
HowtoConfigure WEP Encryption Security ..........................................................4-10
H ow to Configure W PA-PSK E ncryption Security ..................................................4-11
Statistics Page ..............................................................................................................4-1 2
Advanced Settings Page ..............................................................................................4-13
Chapter 5 

Contents vii
Appendix C 
Preparing Your PCs for Network Access
Preparing YourComputers forTCP/IP Networking .......................................................C-1
Configuring Windows 98SE and M e forTCP/IP N etworking .........................................C-1
Install orVerify W indows N etworking Components .................................................C-1
E n a b lin g D H C P to A u tom a tica lly C on figu re T C P /I P S e ttin gs in W in d ows 9 8 S E a n d M e
C-3
Selecting the InternetAccess M ethod .....................................................................C-5
Verifying TCP /IP P roperties ....................................................................................C-5
C onfiguring W indows 2000 or XP forTC P /IP N etworking .............................................C-6
Install orVerify W indows N etworking Components .................................................C-6
D H C P C onfiguration ofTC P /IP in W indows XP or 2000 .........................................C-7
D HCP Configuration ofTCP/IP in W indows XP .....................................................C-7
D H C P C onfiguration ofTC P /IP in W indows 2000 ..................................................C-9
Verifying TC P /IP P roperties forW indows XP or2000 ........................................... C-11
Glossary
ListofGlossary Terms ...................................................................................................G-1
Index

viii Contents

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
AboutThisManual 1-1
Chapter 1
About This Manual
Audience, Scope, Conventions
This manual assumes that the reader has basic to intermediate computer and Internet skills.
However, tutorial information is provided in the Appendices, on the NETGEAR RangeMax™
Wireless PCI Adapter WPN311 Resource CD, and on the NETGEAR Web site.
This manual uses the following typographical conventions:
This manual uses the following formats to highlight special messages:
This manual is written according to these specifications:
Table 1-1. Typographical conventions
italics Emphasis.
bold Userinput.
SMALL CAPS Fileand directorynames.
Note: This format is used to highlight information of importance or special interest.
Table 1-2. Manual Specifications
Product Version N ETGEAR RangeM ax™ W ireless PCI AdapterWPN311
ManualPartNumber 202-10075-01
M anual P ublication D ate February 2005
Note: Product updates are available on the NETGEAR Web site at 
http://www.netgear.com/support/main.asp.

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
1-2 AboutThisManual
How to Print this Manual
To print this manual you can choose one of the following several options, according to your needs.
•Printing a Chapter. Use the link at the top right of any page.
— Click “PDF of This Chapter” link at the top right of any page in the chapter you want to
print. A new browser window opens showing the PDF version of the chapter you were
viewing.
— Click the print icon in the upper left of the window.
—Tip: If your printer supports printing two pages on a single sheet of paper, you can save
paper and printer ink by selecting this feature.
•Printing the Full Manual. Use the PDF button in the toolbar at the top right of the browser
window.
— Click PDF button. A new browser window opens showing the PDF version of the chapter
you were viewing.
— Click the print icon in the upper left of the window.
—Tip: If your printer supports printing two pages on a single sheet of paper, you can save
paper and printer ink by selecting this feature.

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Introduction Chapter2-1
Chapter 2
Introduction
This chapter introduces the features, package contents, and appearance of the NETGEAR
RangeMax™ Wireless PCI Adapter WPN311.
About the NETGEAR RangeMax™ Wireless PCI Adapter
WPN311
The NETGEAR RangeMax™ Wireless PCI Adapter WPN311 gives you flexibility to install the
PC in the most convenient location available. The WPN311 frees you from traditional Ethernet
wiring that is limited by cabling requirements.
Its auto-sensing capability allows high packet transfer up to 108 Mbps for maximum throughput or
dynamic range shifting to lower speeds due to distance or operating limitations in an environment
with a lot of electromagnetic interference.
The WPN311 Wireless PCI Adapter provides reliable, standards-based 802.11b 11 Mbps Wireless
Local Area Network (WLAN) connectivity that is protected with industry-standard security. In
addition, it offers the faster speeds of the 802.11g standard. The WPN311 works with Windows
98SE, Me, 2000, and XP operating systems.
Key Features and Related NETGEAR Products
The WPN311 Wireless PCI Adapter provides the following features:
• Reliable IEEE 802.11b/g standards-based wireless technology.
• Supports roaming between access points when configured in Infrastructure mode.
• 108 Mbps high speed data transfer. Wireless nodes negotiate to operate in the optimal data
transfer rate. In a noisy environment or when the distance between the wireless nodes is far,
the wireless nodes automatically fall back to operate at lower transfer rates.
• High level of data encryption using128-bit Shared Key WEP data encryption method. Lower
level of data encryption or no data encryption is available to simplify your network setup or to
improve the data transfer rate.

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Chapter2-2 Introduction
The following NETGEAR products can be configured to communicate with the WPN311 Wireless
PCI Adapter:
• WPN824 RangeMax™ Wireless Router
• WGT634U 108 Mbps Wireless Media Router
• WGT624 108 Mbps Wireless Firewall Router
• WG602 54 Mbps Wireless Access Point
• WGR614 54 Mbps Cable/DSL Wireless Router
• WGR511 54 Mbps Wireless PC Card
• MA111 802.11b Wireless USB Adapter
• ME103 802.11b ProSafe Wireless Access Point
• MA311 802.11b Wireless PCI Adapter
• MR814 802.11b Wireless Cable/DSL Routers
• MA521 802.11b Wireless Compact Flash Card
What’s in the Box?
The product package should contain the following items:
• NETGEAR RangeMax™ Wireless PCI Adapter WPN311
• User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
•NETGEAR RangeMax™ Wireless PCI Adapter WPN311 Resource CD, including:
— Driver Software
— Wireless Assistant
— Installation Guide
• Warranty card
• Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Introduction Chapter2-3
A Road Map for ‘How to Get There From Here’
The introduction and adoption of any new technology can be a difficult process. Wireless
technology has removed one of the barriers to networking—running wires. It allows more people
to try networking, while at the same time exposes them to the inherent complexity of networking.
General networking concepts, set up, and maintenance can be difficult to understand. In addition,
wireless technology adds issues such as range, interference, signal quality, and security to the
picture.
To help overcome potential barriers to successfully using wireless networks, the table below
identifies how to accomplish such things as connecting to a wireless network, assuring appropriate
security measures are taken, browsing the Internet through your wireless connection, exchanging
files with other computers and using printers in the combined wireless and wired network.
Table 2-1. A Road Map for How to Get There From Here
If I Want To ... ? What Do I Do? What’s Needed? How Do I?
Connecttoa
wireless
network
1 . I d e n tify th e
wireless
network name
(SSID)and,if
used, the
wireless
security
settings.
2. Setup the
NETGEAR
RangeMax™
W ireless P C I
Adapter
WPN311 with
th e se ttin gs
from step 1 .
1. A wireless network
2 . A d esktop P C with in th e
operating range ofthe wireless
network. Forguidelines about
the range of802.11b/g
wireless networks, please see
“Observe Location and Range
G uidelines” on page 3-2.
To setup the W P N 311 , see
Chapter3, “BasicSetup”and
follow the instructions provided.
Tolearn aboutwireless
networking technology, see
AppendixB, “Wireless
NetworkingBasics”for a general
in trod u ction . 

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Chapter2-4 Introduction
Protectmy
wireless
connection from
snooping,
hacking, or
information
th eft.
1 . A s su re th a tth e
wireless
network has
security
featu res
enabled.
2. Configure my
WPN311 with
th e secu rity
settin gs of th e
wireless
network.
3. Use Windows
security
featu res.
1 . A wire le ss n e twork wi th
a u th e n tica ti on a n d W E P
encryption enabled.
2. W ireless networking
equipmentthatsupportsWEP
encryption, such as the
WPN311 andallNETGEAR
wireless networking products.
Tolearn aboutwireless
networking security, see
“A uthentication and W E P ” on
pageB-2.
To use wireless security
features, please see “E nabling
W ireless S ecu rity F eatu res” on
page4-8 and configure your
W P N 311 accordingly.
Note: Secure Internetsites such as banks and online merchants use encryption security builtinto browsers
like InternetE xplorerand N etscape. Any wireless networking security features you mightimplementare in
a d d ition to th ose a lre a d y in p la ce on se cu re I n te rn e t sites.
Connecttothe
Internetovermy
wireless
network.
1 . A ctiva te m y
wireless link
and verify my
network
connection.
2. Open an
Internet
browsersuch
as Internet
E xplorer or
Netscape
Navigator.
1 . A n a ctive I n te rn e t con n ection
like those from cable or D SL
service providers.
2 . A wire le ss n e twork con n e cted
to th e ca b le or D S L I n te rn e t
service th rou gh a cab le/D S L
rou ter as illu strated in
“C onnecting to an A ccess
P ointin Infrastructure M ode”
on page 4-3.
3. TCP /IP Internetnetworking
software installed and
configured on my P C
according to the requirements
of th e I n te rn e t s ervice p rovid er
4. A browser like Internet
E xplorerorN etscape
Navigator.
To configure your W P N 311 in
I n fra stru ctu re M od e , see “B asic
Installation Instructions”on
page3-3, a n d loca te th e se ction
for you r version ofW ind ows.
Forassistance with configuring
the TCP/IP Internetsoftware on
a PC, see “P rep aring You r
ComputersforTCP/IP
Networking”onpageC-1or refer
to th e P C N etwork in g Tu toria l on
th e NETGEAR RangeMax™
Wireless PCI Adapter WPN311
Resource CD and the Help
information provided in the
W indows system you are using.
.
Table 2-1. A Road Map for How to Get There From Here
If I Want To ... ? What Do I Do? What’s Needed? How Do I?

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Introduction Chapter2-5
Exchangefiles
between a
wirelessly
connected
notebook
computerand
othercomputers
in a my
combined
wireless and
wired network.
1. U se the
Windows
Network
Neighborhood
featu re to
browse for
computers in
the combined
wireless and
wired network.
2. Browse the
hard drive of
the target
computerin
th e n e twork in
ord e r to loca te
th e d irectory or
file s you wa n t
to work with .
3. U se the
Windows
Explorercopy
and paste
fu n ction s to
exchange files
b etwe en th e
computers.
1. The desktop computerI am
u sin g to con n e ct to th e
wireless network needs to be
con figu re d with th e W in d ows
Clientand Fileand Print
Sharing.
2. The desktop computerI am
u sin g to con n e ct to th e
wireless network needs to be
configu red with th e sa m e
W indows W orkgroup or
D om a in se ttin gs a s th e oth e r
W indows computers in the
combined wireless and wired
network.
3. Any W indows networking
security access rights such as
login username/password
thathave been assigned in the
Windows network orfor
sharing particularfiles mustbe
provided when W indows
promptsforsuch information.
4. Ifso-called W indows ‘peer’
W orkgroup networking is being
used, the drive, file system
directory, or file need to be
enabled forsharing.
Forassistance with W indows
networking software, see
A p p end ix C , “P rep aring You r
P Cs forN etwork Access”for
configuration scenarios orrefer
to th e H e lp system in clu d e d with
yourversion ofW indows.
W indows D omain settings are
usuallymanaged bycorporate
computersupportgroups.
W indows Workgroup settings
arecommonlymanaged by
individuals who wantto setup
sm a ll n e twork s in th e ir h om e s, or
small offices.
F or a s si sta n ce with se ttin g u p
W in d ows n e twork in g, re fe r to th e
P C N e twork in g Tu tori a l on th e
NETGEAR RangeMax™
Wireless PCI Adapter WPN311
Resource CD and the Help
information provided in the
W indows system you are using.
Table 2-1. A Road Map for How to Get There From Here
If I Want To ... ? What Do I Do? What’s Needed? How Do I?

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
Chapter2-6 Introduction
U se printers in a
combined
wireless and
wired network.
1. U se the
Windows
Printersand
Faxfeaturesto
locate
available
printers in the
combined
wireless and
wired network.
2. U se the
WindowsAdd
a Printer
wizard to add
access to a
n e twork p rin ter
from th e P C
you areusing
to wirelessly
con n ect to th e
network.
3. From theFile
menu ofan
application
such as
M icrosoft
Word, use the
P rin t S e tu p
featu re to
directyour
p rin t ou tp u t to
th e p rin ter in
th e n e twork .
1. The desktop computerI am
u sin g to con n e ct to th e
wireless network needs to be
con figu re d with th e W in d ows
Clientand Fileand Print
Sharing.
2. The desktop computerI am
u sin g to con n e ct to th e
wireless network needs to be
configu red with th e sa m e
W indows W orkgroup or
D om a in se ttin gs a s th e oth e r
W indows computers in the
combined wireless and wired
network.
3. Any W indows networking
security access rights such as
login username/password
thathave been assigned in the
Windows network mustbe
provided when W indows
promptsforsuch information.
4. Ifso-called W indows ‘peer’
networking is being used, the
printerneeds to be enabled for
sharing.
W indows D omain settings are
usuallymanaged bycorporate
computersupportgroups.
W indows Workgroup settings
arecommonlymanaged by
individuals who wantto setup
sm a ll n e twork s in th e ir h om e s, or
small offices.
F or a s si sta n ce with se ttin g u p
W in d ows n e twork in g, re fe r to th e
P C N e twork in g Tu tori a l on th e
NETGEAR RangeMax™
Wireless PCI Adapter WPN311
Resource CD and the Help
information provided in the
W indows system you are using.
F or a s si sta n ce with se ttin g u p
p rinters in W ind ows, refer to the
H elp and Supportinformation
th a t com e s with th e ve rsion of
the W indows operating systems
you areusing.
Table 2-1. A Road Map for How to Get There From Here
If I Want To ... ? What Do I Do? What’s Needed? How Do I?

BasicSetup 3-1
Chapter 3
Basic Setup
This section describes how to install your NETGEAR RangeMax™ Wireless PCI Adapter
WPN311 and set up basic wireless connectivity on your Wireless Local Area Network (WLAN).
Advanced wireless network configuration is covered in Chapter 4, “Configuration” in this
manual.
What You Will Need Before You Begin
You need to verify that your computer meets the minimum system requirements and identify the
wireless network configuration settings of the WLAN where you will connect before you can
configure your wireless pc adapter and connect.
Verify System Requirements
Before installing the NETGEAR RangeMax™ Wireless PCI Adapter WPN311, please make sure
that these minimum requirements have been met:
• Pentium®III class computer with an available PCI slot
•CDdrive
• 20 Mbytes of free hard disk space
• Some versions of Windows may ask for the original Windows operating system installation
files to complete the installation of the WPN311 driver software
Note: Indoors, computers can easily connect to 802.11 wireless networks at distances of
several hundred feet. Because walls do not always block wireless signals, others from
outside your immediate area could access your network. It is important to take
appropriate steps to secure your network from unauthorized access. The NETGEAR
RangeMax™ Wireless PCI Adapter WPN311 provides highly effective security
features which are covered in “Enabling Wireless Security Features” on page 4-8.
Deploy the security features appropriate to your needs.

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
3-2 BasicSetup
Observe Location and Range Guidelines
Computers can connect over 802.11g wireless networks indoors at a range which varies
significantly based on the physical location of the computer with the NETGEAR RangeMax™
Wireless PCI Adapter WPN311. For best results, avoid potential sources of interference, such as:
• Large metal surfaces
•Microwaves
• 2.4 GHz Cordless phones
In general, 802.11g wireless devices can communicate through walls. However, if the walls are
constructed with concrete, or have metal, or metal mesh, the 802.11g effective range will decrease
if such materials are between the devices.
Two Basic Operating Modes
The WPN311 Wireless PCI Adapter, like all 802.11b/g adapters, can operate in the following two
basic modes:
•Infrastructure Mode: An 802.11 networking framework in which devices and computers
communicate with each other by first going through an access point (AP). For example, this
mode is used when computers in a house connect to an AP that is attached to a router which
lets multiple computers share a single Cable or DSL broadband Internet connection.
•Ad-Hoc Mode: An 802.11 networking framework in which devices or computers
communicate directly with each other, without the use of an access point. For example,
Ad-Hoc Mode is used when two Windows computers are configured with file and print
sharing enabled and you want to exchange files directly between them.
Both of these configuration options are available with the WPN311 Wireless PCI Adapter.
Infrastructure configuration procedures for basic network connectivity are covered below.
Advanced infrastructure configuration procedures and ad-hoc configuration are covered in
Chapter 4, “Configuration” of this manual.
WPN311 Default Wireless Configuration Settings
If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you will
need to identify the wireless configuration and security parameters already defined.

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
BasicSetup 3-3
Your NETGEAR RangeMax™ Wireless PCI Adapter WPN311 factory default basic settings are:
• Network Name Service Set Identification (SSID): ANY — a special name which indicates the
first available network will be used
Note: In order for the WPN311 Wireless PCI Adapter to communicate with a wireless access
point or wireless adapterY be configured with the same wireless network name
(SSID).
• Network Mode (Infrastructure or Ad-Hoc): Infrastructure
• Data security WEP encryption: Disabled
The section below provides instructions for setting up the NETGEAR RangeMax™ Wireless PCI
Adapter WPN311 for basic wireless connectivity to an access point. The procedures provide
step-by-step inst instructions for Windows PCs. Use the procedure that corresponds to the
version of Windows you are using.
Basic Insta
Use the procedure below that corresponds to the version of Windows you are using.

User Manual for the NETGEAR RangeMax™ Wireless PCI Adapter WPN311
3-4 BasicSetup
For Windows XP Users Installing a WPN311
Install the WPN311 software.
a. Power on your computer, let the
operating system boot up completely,
and log in as needed.
b. Insert the NETGEAR RangeMax™
Wireless PCI Adapter WPN311
Resource CD into your CD drive. The
CD main page shown at the right
loads.
c. Click the “Install Driver & Utility”
link.
d. Follow the Smart Wizard - Install
Assistant steps, and click Finish when
done to restart your computer.
WPN311 ResourceCD mainpage
Note: I f th is p a ge d oes n ot a u tom a tica lly a p p e a r,
browse the rootofthe C D and double-click on
autorun.exe to d isp la y th i s p a g e.
SmartW izard -Install Assistant
Note: Ifa W indows XP Certification warning
appears, clickContinue Anyway to p rocee d .